1. Product Overview
The Sunster 8KW Portable Diesel Air Heater is designed to provide efficient and quiet heating for various environments, including cars, RVs, campervans, trucks, and tents. It features rapid heating within 10 minutes and offers multiple control options for convenience.
This 2025 upgraded version includes enhancements such as an integrated air filter, a stretchable heat-resistant air outlet pipe, improved terminal design, and side-mounted exhaust pipe installation for easier setup and maintenance.

Figure 1: Sunster 8KW Portable Diesel Air Heater and included accessories.
2. Package Contents
Upon opening the package, verify that all components are present and undamaged. The standard package includes:
- Sunster Air Diesel Heater Unit
- A2302B LCD Switch
- Remote Control
- Connection Holders (AAAA)
- User Manual
- Silencer
- Battery Power Cord
- Exhaust Pipe
- Fixture Accessories Set
- AC-DC Adapter Power
- Flexible and stretchable Air Outlet Pipe (2m heat-resistant insulation)

Figure 2: Product Information and labeled parts.

Figure 3: Close-up of upgraded features including exhaust pipe installation, terminal design, integrated air filter, and air outlet duct.
Video 1: Unboxing and initial setup of the Sunster Portable Diesel Air Heater.
3. Setup Instructions
The Sunster Portable Diesel Air Heater is designed for easy, installation-free use. Follow these steps to set up your heater:
3.1 Placement
- Place the heater on a stable, level surface.
- Ensure adequate clearance around the air inlet and outlet for proper airflow.
- The heater is suitable for altitudes below 9843 feet (3000 m).
3.2 Fueling
- Unscrew the fuel tank cap.
- Fill the built-in 5L (1.3 GAL) fuel tank with diesel fuel.
- Securely replace the fuel tank cap.
3.3 Exhaust Pipe Installation
- The exhaust pipe can be installed on the side of the unit.
- No bottom padding installation is required, which helps prevent exhaust pipe blockage.
- Connect the silencer to the exhaust pipe to reduce noise.
3.4 Air Outlet Duct
- Attach the 2m stretchable heat-resistant insulation flexible air outlet pipe to the air outlet.
- Direct the pipe to the area requiring heat.
3.5 Power Connection
- The heater is adaptable to various voltage environments (DC 12V/24V or AC 110-240V).
- For DC power, connect the provided battery power cord to a compatible 12V or 24V vehicle battery.
- For AC power, use the included AC-DC adapter power supply and plug it into a standard 110-240V outlet.
- Ensure all connections are secure.

Figure 4: Power adaptability for AC 110-240V and DC 12V/24V.
4. Operating Instructions
The Sunster heater offers multiple intelligent control methods for ease of use.
4.1 Control Methods
- LCD Switch (A2302B): Features a 1-button, 1-knob operation for direct control.
- Remote Control: Allows for convenient operation from a distance.
- Bluetooth APP Control: Connect your smartphone via Bluetooth to control the heater, preheat your vehicle, and monitor its status.

Figure 5: Three intelligent control methods: Bluetooth, Remote Control, and LCD Display Screen.

Figure 6: Upgraded Bluetooth LCD Switch features.
4.2 Key Functions
- 24-Hour Timing Function: Set specific times for the heater to turn on or off.
- Temperature / Gear Regulation: Adjust the heating temperature or power level. The default temperature unit is Fahrenheit (℉), but can be switched to Celsius (℃).
- Language Switching: Select display language (Chinese, English, Russian, or off).
- Automatic Start and Stop (Auto Climate Control): In automatic mode, the heater will automatically shut down 30 seconds after reaching the set temperature. It will restart 30 seconds after the indoor temperature drops 2℃ below the set temperature.
- Ventilation Function: Activate ventilation mode to circulate fresh air without heating.
- Preheating: Use the Bluetooth app or remote control to preheat the vehicle before entry.
- Voice Broadcasting: Provides audible feedback on heater status and settings.
4.3 Safety Features
- Overheating Protection: The heater will automatically shut off if the temperature exceeds 518°F (270°C).
- Short-circuit Protection: Built-in protection against electrical short circuits.
- Intelligent Temperature Control: Maintains a consistent and comfortable temperature.

Figure 7: Safety features of the Sunster Diesel Air Heater.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your Sunster heater.
5.1 Cleaning
- Wipe the exterior of the heater with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
5.2 Air Filter
- The heater features an upgraded integrated air filter for automatic air filtration.
- Periodically check the air inlet for any obstructions or excessive dust buildup. Clean as necessary to ensure proper air quality and heater efficiency.
5.3 Fuel Pump
- The ultra-quiet oil pump is designed for reduced operating noise.
- Ensure the fuel lines are free from kinks or blockages.
6. Troubleshooting
If you encounter issues with your Sunster heater, refer to the following common problems and solutions:
6.1 Fault Codes
The LCD switch will display 8 fault codes to indicate specific issues. Refer to the detailed fault code list in the full user manual for specific diagnostics and solutions.
6.2 Common Issues
- Heater not turning on: Check power connections, fuel level, and ensure the unit is not in an error state (check fault codes).
- Car battery drains quickly: Ensure the heater is connected to an adequate power source. For prolonged use, consider a dedicated auxiliary battery or external power supply to avoid draining the vehicle's main battery.
- Unpleasant smell from the heat pipe: A new heater may emit a slight odor during initial use due to manufacturing residues burning off. Ensure adequate ventilation during the first few uses. If the smell persists, check for any blockages in the exhaust system or foreign objects in the air outlet.
- Heater not producing enough heat: Verify the temperature setting and ensure the air inlet and outlet are not obstructed. Check fuel quality.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Sunster |
| Item Type | Heating & Fans |
| Material | PA |
| Rated Power | 8KW |
| Rated Voltage | 12V & 24V & 220V |
| Fuel Consumption | 0.16-0.45L/H |
| Radiator Working Temperature | -40~+50°C |
| Operating Temperature of Oil Pump | -40~+40°C |
| Built-in Fuel Tank | 5L / 1.3GAL |
| Control Method | LCD + Remote Control + Bluetooth |
| BTU | 215-269ft² / 20-25 m² |
| Noise Level | ≤35db |
| Startup Current | 13A |
| Rated Current | 3A |
| Item Weight | 10kg |
| Switch Type | LCD Switch |
| Fuel Type | Diesel |
| Special Features | Heating & Ventilation function |
8. User Tips
- App Control: For remote control via the app, ensure your device's Bluetooth is enabled and paired with the heater. Refer to the full manual for specific app download and pairing instructions.
- Mounting Flexibility: The heater's design allows for flexible placement. The upgraded exhaust pipe installation on the side provides more options for mounting in various vehicles or spaces.
- Scheduled Heating: Utilize the 24-hour timing function to set the heater to turn on before you wake up or arrive at your destination, ensuring a warm environment.
- Battery Management: When using the heater with a vehicle battery, especially for extended periods, monitor your battery's charge level. Consider using a separate leisure battery or connecting to shore power to prevent draining your main vehicle battery.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your purchase receipt as proof of purchase.