NAMSTE NMT-056

Contents

NAMSTE 400m³ Button Control Electric Aroma Diffuser Instruction Manual

Model: NMT-056

1. Introduction

Thank you for choosing the NAMSTE 400m³ Button Control Electric Aroma Diffuser. This device is designed to provide a comfortable aromatherapy environment in various settings such as hotels, car dealerships, brand shops, bars, public areas, offices, and bedrooms. Please read this manual thoroughly before use to ensure proper operation and maintenance.

The NAMSTE diffuser features a 160ml capacity, button control, smart timing, an HD display, and a versatile design for both flat placement and wall mounting. It operates quietly at less than 35dBA and covers an area of 200-500m³.

NAMSTE 400m³ Diffuser with key features: 160ml capacity, button control, less than 35dBA noise.
NAMSTE 400m³ Diffuser highlighting its capacity, button control, and low noise level.
Product advantages: Covers 200-500m³, Key Operation, Smart Timing, HD Display, Wall Mount Design.
Key advantages of the NAMSTE Aroma Diffuser.

2. Safety Precautions

WARNING: To avoid casualties and property loss, please always comply with the following safety precautions.

Prohibition:

  • Do not use unsafe plugs or power cables.
  • Do not install the device where children can reach it.
  • Do not install the device in a place that cannot bear its weight or is prone to falling/collapsing.
  • Do not tilt the device.
  • Keep the device away from fire and heat sources. Do not store flammable or explosive materials near the device.
  • Except for the atomizer, the housing material is not resistant to corrosion.
  • Do not use the device in high temperature or wet environments.
  • Do not use inflammable, explosive, corrosive, or other hazardous solvents with the device.
  • Do not mix essential oil with water for use in the diffuser.

Important Warnings:

  • Do not block the mist outlet with hands or other objects while the device is working.
  • Do not spill water or conductive/corrosive liquids on the surface or inside the device.
  • Avoid excessive continuous use. It is recommended that the daily usage time does not exceed 14 hours, preferably at the second intensity setting.
  • If the device shows abnormalities in extreme climates or environments, safely cut off the power immediately.

3. Setup

The NAMSTE diffuser offers flexible installation options: it can be placed flat on a surface or mounted on a wall.

Double installation options: flat placement or wall hanging.
The diffuser can be placed flat or wall-mounted.

Initial Setup Steps:

  1. Prepare for Installation: Decide whether to place the diffuser flat or wall-mount it. If wall-mounting, use the provided wall mounting accessories (e.g., adhesive hooks) to secure the device firmly.
  2. Open the Device: Gently remove the outer cover of the diffuser to access the essential oil bottle compartment.
  3. Pour Essential Oil: Unscrew the essential oil bottle and carefully pour your desired essential oil into it. Ensure you only use pure essential oils and do not mix with water.
  4. Reassemble: Screw the essential oil bottle back into place and reattach the outer cover securely.
  5. Connect Power: Plug the power adapter into the diffuser's power port and then into a suitable power outlet. The device will auto-start upon power connection.
Four steps for product setup: Turn on the machine, Pour in the essential oil, Key adjustment, Machine set to work.
Visual guide for setting up the diffuser.

Video demonstrating the setup and operation of the NAMSTE Aroma Diffuser.

4. Operating Instructions

The diffuser features a user-friendly interface with an HD display and button controls for easy programming.

UI Interface Display:

When in standby mode, the UI displays current day of the week, time, work information, battery power, and Bluetooth connection status.

Local Time Setting:

  1. Long press the "SET" button for five seconds to enter time setting mode.
  2. Use the "↑↓" buttons to set the hour, then press "SET" to confirm.
  3. Use the "↑↓" buttons to set the minute, then press "SET" to confirm.
  4. Use the "↑↓" buttons to select the current day of the week, then press "SET" to confirm and exit. The system will automatically save your settings.

Work Time and Scent Intensity Setting (Five Working Programs):

The device allows you to set up to five distinct working programs, each with its own ON/OFF times and scent intensity.

  1. Program 1 - Work Start Time (Event On 1):
    Press the "MODE" button once to enter the first program's work start time setting. Press "SET" to activate hour setting, use "↑↓" to adjust, then "SET" to confirm. Repeat for minute setting. For day selection, use "↑" to select a day and "↓" to cancel. The system automatically saves and exits.
  2. Program 1 - Work End Time (Event Off 1):
    Press the "MODE" button a second time to enter the first program's work end time setting. Press "SET" to activate hour setting, use "↑↓" to adjust, then "SET" to confirm. Repeat for minute setting. The system automatically saves and exits.
  3. Program 1 - Scent Work Duration (Scent Work):
    Press the "MODE" button a third time to adjust the working seconds (scent intensity). Use "↑↓" to adjust.
    • 5 to 100 seconds: Adjusts by 5 seconds per press.
    • 100 to 300 seconds: Adjusts by 10 seconds per press.
    • 300 to 900 seconds: Adjusts by 50 seconds per press.
  4. Program 1 - Scent Pause Duration (Scent Pause):
    Press the "MODE" button a fourth time to adjust the pause seconds. Use "↑↓" to adjust.
    • 5 to 100 seconds: Adjusts by 5 seconds per press.
    • 100 to 300 seconds: Adjusts by 10 seconds per press.
    • 300 to 900 seconds: Adjusts by 50 seconds per press.
  5. Remaining Programs: Repeat steps 1-4 for the remaining four programs (Program 2 to Program 5).
Smart Time Setting with example intervals: 00:00-08:00, 08:00-12:00, 13:00-17:00, 18:00-22:00, 22:01-23:59.
Example of smart time settings for fragrance diffusion.

System Reset:

Press and hold the "MODE" + "SET" buttons simultaneously for 5 seconds to restore the device to factory settings. The default settings are: Program 1 from 8:00 AM to 10:00 PM with a scent frequency of 10-120 seconds. The other four programs are set to 00:00-00:00 with a scent frequency of 10-120 seconds.

Power On/Off:

  • To Power Off: In the ON state, press and hold the "MODE" button for 5 seconds. The "OFF" icon will flash 3 times, and the screen will display "OFF".
  • To Power On: In the OFF state, press and hold the "MODE" button for 5 seconds. The "ON" icon will flash 3 times, and the device will power on.

App Control:

For advanced control and additional features, download the "Aroma Link" App. Scan the QR code provided in the manual or product packaging to download the app. Refer to the app's internal instructions for detailed usage.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your diffuser.

  • Periodic Cleaning: Clean the equipment periodically, ideally every 2-3 months, to maintain its best working condition.
  • Power Off Before Cleaning: Always cut off the power before cleaning. Do not use wet hands to operate the device directly to prevent electric shock and injury.
  • Handling Leaks: If essential oil leaks or spills, safely cut off the power. Do not touch the leaked liquid or solvent with bare hands.

Long-Term Storage:

If the device will not be used for an extended period:

  1. Turn off the device and unplug the power adapter. Secure the power cord.
  2. Clean the filter components.
  3. Place a deodorizer package (containing activated carbon) inside the device or its packaging to prevent residual substances from producing odors.
  4. Cover the machine with a dust cover and store it in a cool, ventilated place.

6. Troubleshooting (FAQ)

If you encounter any issues with your diffuser, refer to the table below for common problems and their solutions.

ReasonSolution
1. The PCB cannot work
a. PCB damage.
b. The battery is flat.
c. PCB poor welding, resulting in insensitive connection.
d. Power cut off.
A. Replace the PCB.
B. Replace the battery.
C. Replace the PCB.
D. Check the adapter and power cable.
2. The PCB is working but the device is not scenting (no sound)
a. The pump system is broken.
b. Time setting is incorrect.
c. Inner circuit problems.
A. Replace the pump.
B. Check the time setting.
C. Check the inner circuit (use a multimeter).
3. Abnormal Noise
a. Pump is broken, aged, or loose.
b. Trachea cable connection issues.
c. Internal structure is damaged.
A. Adjust or change the pump.
B. Check the cable connection.
C. Adjust or change parts.
4. Machine works but no scent or scent is weak
a. The nozzle is blocked.
b. The pipette falls off.
c. The pump system is aged.
d. The atomizer is blocked.
e. Impurities in the essential oil.
A. Replace the nozzle (first soak in alcohol for a few minutes) or clear with a fine needle.
B. Reconnect the pipette.
C. Replace the pump.
D. Clean the atomizer.
E. Replace with pure essential oil.
5. Oil Leakage
a. The equipment is tilted.
b. The atomizer leaks.
A. Place the machine straight.
B. Replace a new atomizer.

7. Specifications

FeatureSpecification
ModelNMT-056
ColorBlack and White
Bare Metal Size210mm x 140mm x 70mm
Weight0.75 KG
VoltageDC12V-1A
Power8W
Noise Level<35dBA
Capacity160ml
Coverage Area200-500m³
MaterialPP plastic
Installation MethodFlat, Wall hanging
Operation ModeButton Control
CertificationsCE, FCC, RoHS, CNAS
Plug SpecificationsUS, EU, UK, AU
Product parameters including model, color, weight, voltage, power, noise, capacity, size, coverage, material, and installation.
Detailed product parameters for the NAMSTE Diffuser.

8. User Tips

  • Use High-Quality Essential Oils: Always use pure, high-quality essential oils to prevent clogging of the nozzle and atomizer, ensuring consistent scent diffusion and prolonging the life of your device.
  • Optimal Placement: For best coverage, place the diffuser in a central location within the desired area, or wall-mount it at an appropriate height.
  • Experiment with Settings: Utilize the five programmable work periods and adjustable scent intensity to find the perfect fragrance level and schedule for your environment.

9. Warranty and Support

Warranty Period:

The equipment warranty period is 12 months, calculated from the date of sale.

Free Maintenance Eligibility:

To enjoy free maintenance services, please provide the warranty card, invoice, or any other proof of purchase from our company.

Exclusions:

Faults caused by human error or improper operation are not covered under warranty and will not be eligible for free maintenance.

Support Services:

  • Free technical solutions and installation process guidance.
  • Free online FAQ consultation and scent-marketing suggestions.

Please keep this instruction manual and the warranty card carefully for future reference.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.