1. Introduction
Thank you for choosing the Freeman LD635 23 Gauge Cordless Pin Nailer. This portable 20V battery-powered tool is designed for precision fastening in various woodworking and finishing applications. Its cordless design eliminates the need for air compressors and hoses, offering unparalleled freedom and convenience. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Figure 1: Freeman LD635 23 Gauge Cordless Pin Nailer
2. Safety Information
Always follow basic safety precautions to reduce the risk of personal injury and damage to the tool. Read all instructions before operating this tool.
- Wear Eye Protection: Always wear ANSI Z87.1 compliant safety glasses with side shields.
- Wear Hearing Protection: Prolonged exposure to noise can cause hearing damage.
- Keep Work Area Clear: Ensure your work area is well-lit and free of clutter.
- Secure Workpiece: Always secure the material you are working on to prevent movement.
- Avoid Accidental Firing: Never carry the tool with your finger on the trigger. The tool features a trigger-lock mechanism to prevent unintentional firing.
- Use Correct Fasteners: Only use 23 Gauge headless pin nails within the specified length range (15-35mm, 0.63mm diameter).
- Inspect Tool Before Use: Check for damaged parts, loose screws, or any other condition that may affect safe operation.
- Disconnect Power: Always remove the battery pack before making adjustments, clearing jams, or performing maintenance.
- Do Not Overreach: Maintain proper footing and balance at all times.
- Keep Children Away: Do not allow children or untrained persons to operate this tool.
3. Product Components
Familiarize yourself with the parts of your Freeman LD635 Pin Nailer:
- Battery Pack: Provides power to the tool. (20V Lithium-ion)
- Nail Magazine: Holds the pin nails. Capacity: 100 pieces.
- Nosepiece: The part of the tool that contacts the workpiece and guides the nail.
- Trigger: Activates the nailing mechanism.
- Select Fire Button: Allows switching between single sequential and bump firing modes.
- Battery Indicator: Shows the remaining battery charge.
- Drive Blade: Pushes the nail into the material.
- Textured Rubber Grip: For comfortable and secure handling.
- LED Light: Illuminates the work area and indicates low battery.

Figure 2: Key features of the LD635 Pin Nailer

Figure 3: 20V Lithium-ion Battery

Figure 4: Nail Magazine and Nosepiece
4. Setup and Preparation
4.1. Charging the Battery
The Freeman LD635 uses a 20V Lithium-ion battery. Ensure the battery is fully charged before use for optimal performance.
- Connect the charger to a power outlet.
- Slide the battery pack onto the charger.
- The charger's indicator light will show the charging status. Refer to the charger's manual for specific light patterns.
- Once fully charged, remove the battery from the charger.

Figure 5: Smart Charging System with temperature, voltage, and current control for battery protection.
4.2. Installing the Battery
- Align the battery pack with the battery port on the nailer.
- Slide the battery into place until it clicks securely.
- To remove, press the battery release button and slide the battery out.
4.3. Loading Nails
The LD635 is compatible with 23 Gauge headless pin nails, with a diameter of 0.63mm (0.025 inches) and lengths ranging from 15mm (5/8") to 35mm (1-3/8").
- Ensure the battery is removed for safety.
- Pull back the magazine follower until it locks in the open position.
- Insert a strip of 23 Gauge pin nails into the magazine channel, ensuring the nail points are facing forward.
- Release the magazine follower, allowing it to push the nails forward.
- Do not overfill the magazine; the capacity is 100 nails.

Figure 6: Compatible 23 Gauge Headless Pin Nail Sizes
5. Operating Instructions
5.1. Selecting Firing Mode
The LD635 offers two firing modes: single sequential and bump firing. Use the 'Select Fire Button' to switch between modes.
- Single Sequential Firing: For precise nail placement. The trigger must be released and pressed for each nail.
- Bump Firing: For faster nailing. Hold the trigger and press the nosepiece against the workpiece to fire nails rapidly.

Figure 7: Select Fire Button and Battery Indicator
5.2. Nailing Procedure
- Ensure the battery is installed and nails are loaded.
- Select the desired firing mode.
- Place the nosepiece firmly against the workpiece where you want to drive a nail.
- Press the trigger to fire a nail.
- For bump firing, keep the trigger pressed and move the nosepiece along the workpiece to drive multiple nails.
- The tool has a fast nailing speed of up to 3 nails per second (180 fasteners/min).

Figure 8: Fast Nailing Speed in action
5.3. Applications
This nailer is ideal for various construction applications, including:
- Finish and trim work
- Woodworking projects
- Rattan furniture assembly
- Craft work

Figure 9: Typical Applications
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your tool.
- Cleaning: Keep the tool clean and free of dust and debris. Use a dry cloth to wipe down the exterior.
- Lubrication: Refer to the full product manual for specific lubrication requirements, if any.
- Drive Blade Replacement: The tool features a patented structural design for quick drive blade replacement, requiring only 5 screws to remove.

Figure 10: Drive Blade Quick Replacement System
- Storage: Store the tool and battery in a dry, secure place away from children and direct sunlight. Remove the battery when storing for extended periods.
- Battery Care: The battery features overcurrent, overvoltage, overheating, and overcharge protection. Always use the recommended charger.

Figure 11: Battery Protection Features
7. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Nailer does not fire | Battery is low or not installed correctly; Magazine is empty; Nosepiece not fully depressed. | Charge/reinstall battery; Load nails; Ensure nosepiece is firmly against workpiece. |
| Nails jam in the tool | Incorrect nail size; Damaged nails; Debris in magazine. | Use correct 23 Gauge nails; Inspect nails before loading; Clear debris from magazine. Remove battery before clearing jams. |
| Nails not driven flush | Battery low; Tool not held firmly against workpiece; Depth adjustment needed. | Charge battery; Apply more pressure to the tool; Adjust depth setting (if available, refer to full manual). |
| Tool stops working unexpectedly | Battery overheated or discharged; Internal fault. | Allow battery to cool or recharge; If problem persists, contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | LD635 |
| Nail Gauge | 23 Gauge |
| Fastener Size (Diameter) | 0.63mm (0.025 inches) |
| Fastener Size (Length) | 15mm (5/8") to 35mm (1-3/8") |
| Magazine Capacity | 100 pieces |
| Nailing Rate | Up to 3 nails/second (120-180 nails/min) |
| Voltage | 20V |
| Battery Type | Lithium-ion |
| Battery Amp Hours | Available in 1.5Ah, 2Ah, 4Ah |
| Fasteners Per Charge (4.0Ah) | Up to 6000 nails |
| Dimensions (w/o battery) | 238 x 230 x 68mm |
| Weight (w/o battery) | 1.9kg |
| Installation Method | Self-contained |
| Grade | DIY, Industrial |
| Applications | Finish and trim, wood working, rattan furniture |
| Warranty | 1 year |

Figure 12: Lightweight Design (1.9kg without battery)
9. User Tips
- For delicate trim work, always test on a scrap piece of material first to ensure proper depth and prevent splitting.
- Keep extra nail strips readily available to avoid interruptions during larger projects.
- Utilize the built-in LED light for improved visibility in dimly lit work areas.
- The textured rubber grip provides enhanced comfort and control, especially during extended use.
10. Warranty and Support
The Freeman LD635 Pin Nailer comes with a 1-year warranty. For warranty claims, technical support, or service inquiries, please contact the seller or an authorized service center. Keep your proof of purchase for warranty validation.
11. Frequently Asked Questions (FAQ)
- Q: What type of nails does the LD635 use?
- A: It uses 23 Gauge headless pin nails with a diameter of 0.63mm (0.025 inches) and lengths from 15mm (5/8") to 35mm (1-3/8").
- Q: How many nails can it drive on a single charge?
- A: With a 4.0Ah battery, it can drive up to 6000 nails per charge.
- Q: Is an air compressor required to operate this nailer?
- A: No, the Freeman LD635 is a cordless, battery-powered tool and does not require an air compressor or air hose.
- Q: Can I switch between different firing modes?
- A: Yes, the tool features a 'Select Fire Button' to switch between single sequential and bump firing modes.
- Q: How do I replace the drive blade?
- A: The tool has a patented quick replacement system for the drive blade, requiring the removal of only 5 screws. Refer to the maintenance section for more details.