1. Product Overview
The Douk Audio VU3PRO is a fully upgraded amplifier/speaker selector designed for flexible switching and comparison between two amplifiers and two pairs of speakers. It features large, customizable VU meters and supports high-power audio systems.

2. Setup Instructions
2.1 Package Contents
- 1x VU3PRO Amplifier/Speaker Selector
- 1x Power Adapter
- 1x Remote Control (Note: AAA*2 batteries not included, please prepare separately)
- 1x USB Cable (Type-C)
2.2 Connecting Your Audio System
The VU3PRO allows you to connect two amplifiers and two pairs of speakers. Refer to the diagram below for proper wiring.

- Connect Amplifiers: Connect your two amplifiers (Amplifier A and Amplifier B) to the corresponding 'AMPLIFIER' input terminals on the rear panel of the VU3PRO. Ensure correct polarity (L/R, +/-).
- Connect Speakers: Connect your two pairs of passive speakers (Speaker 1 and Speaker 2) to the corresponding 'SPEAKER' output terminals on the rear panel. Ensure correct polarity (L/R, +/-).
- Power Connection: Connect the provided Type-C USB cable to the 'DC 5V' port on the rear panel and then to the power adapter. Plug the power adapter into a suitable power outlet.
- Remote Control: Insert 2x AAA batteries into the remote control.
Important: Do not connect VU3PRO to amplifiers whose actual output power is greater than 350W, as this may damage the VU meters or the unit itself.
3. Operating Instructions
3.1 Front Panel Controls

- Power Button (⑂): Press to turn the unit on or off.
- Amplifier A/B Switch (A/B buttons): Selects between Amplifier A and Amplifier B inputs.
- Speaker 1/2 Switch (1/2 buttons): Selects between Speaker 1 and Speaker 2 outputs.
- MIC Mode Button (MIC): Activates the built-in microphone pickup for the VU meters. This allows the meters to react to ambient sound if no speakers are connected or for general sound visualization.
- GAIN Knob: Adjusts the sensitivity of the VU meters (20 levels) to match different audio signal strengths.
- SENS Knob: Adjusts the brightness and color of the VU meter backlight.
3.2 Remote Control Functions
The remote control provides convenient access to most settings.

- Power (⑂): Turns the unit on/off.
- ORG: Original setting (resets some display settings).
- MIC: Toggles MIC pickup mode.
- COLOR: Cycles through 35 backlight colors.
- LIGHT: Adjusts backlight brightness (5 levels).
- A/B: Switches between Amplifier A and Amplifier B.
- 1/2: Switches between Speaker 1 and Speaker 2.
- +/-: Adjusts GAIN or SENS depending on the selected mode.
3.3 VU Meter Customization
The VU3PRO offers extensive customization for its large VU meters:
- Backlight Colors: Choose from 35 different backlight colors or set it to automatically change.
- Backlight Brightness: Select from 5 levels (Off, 30%, 50%, 80%, 100%).
- Gain Adjustment: Fine-tune the meter's response with 20 gain levels to accurately reflect your audio signal.
- Sensitivity Adjustment: Adjust sensitivity with 30 levels for optimal visual performance.
All settings will be saved automatically after shutdown.
4. Maintenance
To ensure the longevity and optimal performance of your VU3PRO, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid abrasive cleaners or solvents.
- Environment: Keep the unit in a dry, well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture.
- Handling: Handle the unit with care. Avoid dropping or subjecting it to strong impacts.
- Power: Disconnect the power adapter when the unit is not in use for extended periods.
5. Troubleshooting
- VU Meters Not Working: The VU meters will not function normally if the speaker outputs of the VU3PRO are not connected to speakers. If you only wish to use the VU meter function without connected speakers, activate the MIC input mode.
- No Sound Output: Ensure all amplifier and speaker connections are secure and correctly polarized. Verify that the correct amplifier and speaker outputs are selected using the front panel buttons or remote control. Check that your amplifiers are powered on and functioning correctly.
- Distorted Sound: Check all cable connections for looseness or damage. Ensure that the input signal level from your source is not too high, causing clipping in your amplifier.
- Unit Not Powering On: Verify that the power adapter is correctly connected to the DC 5V Type-C port and plugged into a working power outlet.
- Remote Control Not Responding: Check if the remote control batteries (AAA*2) are correctly inserted and have sufficient charge. Ensure there are no obstructions between the remote and the unit's infrared receiver.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | Douk Audio |
| Model | VU3PRO |
| VU Meter Diameter | 85*45mm |
| Audio Input/Output | 2 groups of banana female |
| Working Mode | 2-IN-2-OUT |
| Max. Through Power (each channel) | 350W@4Ω, 200W@2Ω |
| Supported Amplifier Types | BTL, Class A, Class B, Class AB, Class D digital amp, tube amp |
| Amplifier No-Load Protection | Supported |
| Frequency Response | 30Hz-20kHz |
| Backlight Color Options | 35 kinds of color selection or automatic change |
| Backlight Brightness | 5 levels (Off-30%-50%-80%-100%) |
| GAIN Adjustment | 20 levels |
| Sensitivity Adjustment | 30 levels |
| MIC Pick-up | Supported |
| Remote Control | Supported |
| Settings Saved After Shutdown | Supported |
| Working Voltage | DC 5V ≥2A |
| Power Interface | Type-C |
| Dimensions (W*D*H) | 268*155*75mm / 10.55*6.10*2.95in |
| Net Weight | 1.61kg / 3.55lb |
| Package Weight | 2.00kg / 4.41lb |
7. Warranty and Support
The Douk Audio VU3PRO comes with a 2-year warranty. For detailed warranty information and support, please refer to the official Douk Audio website or contact your retailer.
An electronic version of the user manual (PDF) is available for download: View User Manual (PDF)
8. User Tips
- Simultaneous Speaker Output: The VU3PRO supports simultaneous output from both Speaker 1 and Speaker 2 groups, allowing for flexible audio configurations.
- VU Meter Functionality: If you primarily want to use the VU meters for visual feedback without connecting speakers, ensure you activate the MIC input mode. The meters require a load or microphone input to function correctly.
- Amplifier Compatibility: Always verify that your connected amplifiers do not exceed the maximum supported power of 350W per channel to prevent potential damage to the VU3PRO.
- Remote Control Batteries: Remember that the remote control does not include batteries (requires 2x AAA), so have them ready for immediate use.