Introduction
Thank you for choosing the Hyper Tough 20V Max Cordless Leaf Sweeper. This powerful and lightweight tool is designed for efficient clearing of light grass clippings and leaves from small sidewalks, driveways, and hard surfaces. Its cordless design offers freedom of movement without the hassle of gas or extension cords. Please read this manual carefully before operating the tool to ensure safe and effective use.
What's Included
Your Hyper Tough 20V Max Cordless Leaf Sweeper package includes the following components:
- 1 – 20V Max 130 MPH Sweeper/Blower
- 1 – 20V Max 2.0 Ah Lithium-Ion Battery
- 1 – 20V Max Battery Charger
Safety Information
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.
- Read All Instructions: Familiarize yourself with the controls and proper use of the tool.
- Wear Eye Protection: Always wear safety glasses or goggles when operating the sweeper.
- Wear Hearing Protection: Prolonged use may require ear protection.
- Dress Properly: Do not wear loose clothing or jewelry that could get caught in moving parts. Wear sturdy footwear.
- Keep Area Clear: Ensure the work area is free of debris and bystanders, especially children and pets.
- Avoid Accidental Starting: Ensure the switch is in the OFF position before inserting the battery pack.
- Do Not Abuse the Cord: Never carry the charger by its cord or yank it to disconnect from an outlet.
- Maintain Tool with Care: Keep cutting tools sharp and clean. Follow instructions for lubricating and changing accessories.
- Store Idle Tools: When not in use, tools should be stored in a dry, high, or locked-up place out of reach of children.
Setup and Assembly
The Hyper Tough Leaf Sweeper requires minimal assembly. Follow these steps to prepare your tool for use:
- Attach the Blower Tube: Align the blower tube with the main body of the sweeper. Push and twist until it locks securely into place. The tube is removable for easy storage.
- Charge the Battery: Insert the 20V Max 2.0 Ah Lithium-Ion Battery into the provided 20V Max Battery Charger. Plug the charger into a standard electrical outlet. Allow the battery to charge fully before first use. Refer to the charger's indicator lights for charging status.
- Insert the Battery: Once fully charged, slide the battery pack into the battery port on the sweeper until it clicks into place. Ensure it is firmly seated.
Operation
Operating your leaf sweeper is straightforward:
- Pre-Operation Check: Before each use, inspect the tool for any loose parts, damage, or obstructions in the air intake or blower tube. Ensure the battery is fully charged and securely inserted.
- Starting the Sweeper: Grip the ergonomic overmold handle firmly. Press the power switch to turn on the sweeper.
- Sweeping Technique:
- Hold the sweeper with one hand, utilizing its lightweight design (3.6 lbs).
- Direct the blower tube towards the debris you wish to clear.
- Use a sweeping motion to gather leaves and debris into piles.
- For stubborn debris, use short, powerful bursts of air.
- Stopping the Sweeper: Release the power switch to turn off the tool.
- After Use: Remove the battery pack from the sweeper when not in use to prevent accidental starting and for safe storage.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your tool:
- Cleaning: After each use, wipe down the exterior of the sweeper with a clean, damp cloth. Remove any debris from the air intake vents and blower tube. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. Do not store the battery in a discharged state for extended periods.
- Storage: For long-term storage, remove the battery pack. The blower tube can be removed for more compact storage. Store the sweeper in a dry, secure location out of reach of children.
Troubleshooting
If you encounter issues with your leaf sweeper, try these common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sweeper does not start | Battery not inserted correctly Battery is discharged Power switch is faulty | Ensure battery is fully seated Charge the battery fully Contact customer support |
| Low air output | Battery is low Air intake or blower tube obstructed | Charge the battery Clear any debris from intake/tube |
| Tool stops during operation | Battery is depleted Overheating protection activated | Recharge the battery Allow tool to cool down before resuming use |
If problems persist, please contact Hyper Tough customer support.
Specifications
Detailed specifications for your Hyper Tough 20V Max Cordless Leaf Sweeper:
- Brand: Hyper Tough
- Model: HT21-401-003-05
- Rated Voltage: 20V Max
- No-Load Speed: 12500 RPM
- Air Volume: 100 CFM
- Air Speed: 130 MPH
- Weight: 3.6 lb
- Handle: Overmold Handle
- Tube: Removable for Easy Storage
- Battery: 20V Max 2.0 Ah Lithium-Ion
Warranty and Support
Your Hyper Tough 20V Max Cordless Leaf Sweeper is backed by a 2-year limited warranty. Please retain your proof of purchase for warranty claims. For technical assistance, parts, or warranty service, please contact Hyper Tough customer support.
User Tips
- For best results, sweep in dry conditions. Wet leaves are heavier and more difficult to move.
- Start sweeping from the edges of your work area and move towards the center to create a manageable pile.
- Keep the air intake clear of debris to maintain maximum airflow and prevent overheating.
- Always ensure the battery is fully charged before starting a task to avoid interruptions.
