ICANING ISDB-T Set Top Box User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ICANING ISDB-T Set Top Box. This device is designed to receive 1080P HD terrestrial digital video broadcasting signals, compatible with ISDB-T countries such as Chile, Brazil, Peru, Argentina, Venezuela, Philippines, and Ecuador. It converts digital signals for display on your television, offering features like PVR, TimeShift, and multimedia playback.

Figure 1: Package Contents - ISDB-T Set Top Box, Remote Control, RCA Cable, and User Manual.

2. Safety Information

• Do not open the device casing. There is a risk of electric shock. Refer all servicing to qualified personnel.
• Keep the device away from water, moisture, and direct sunlight.
• Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
• Use only the provided power adapter.

3. Setup

3.1 Package Contents

• ISDB-T Set Top Box
• Remote Control
• RCA Cable
• User Manual

3.2 Connecting the Set Top Box

1. Connect Antenna: Connect your terrestrial antenna to the 'RF IN' port on the rear panel of the Set Top Box.
2. Connect to TV:
   • For Modern TVs (HDMI): Connect an HDMI cable (not included) from the 'HD OUT' port on the Set Top Box to an HDMI input on your TV.
   • For Older TVs (RCA): Connect the provided RCA cable (yellow for video, white for L-audio, red for R-audio) from the 'VIDEO', 'L-AUDIO', 'R-AUDIO' ports on the Set Top Box to the corresponding input ports on your TV.
3. Power Connection: Connect the power cable to the 'AC100~240V 50Hz/60Hz' input on the Set Top Box and then plug it into a wall outlet.
4. Power On: Press the power button on the front panel or the remote control to turn on the Set Top Box.

Figure 2: Rear Panel Connections

3.3 Initial Channel Scan

1. Ensure your TV input is set to the correct HDMI or AV channel where the Set Top Box is connected.
2. Upon first power-on, the Set Top Box will likely guide you through an initial setup wizard.
3. Select your language and country/region.
4. Initiate an 'Auto Scan' or 'Channel Search' to find available digital TV channels. This process may take several minutes.
5. Once the scan is complete, you should be able to view the received channels.

4. Operating Instructions

4.1 Basic Functions (Remote Control)

Figure 3: Remote Control

• POWER: Turns the Set Top Box on/off.
• CH+/CH-: Changes channels up or down.
• VOL+/VOL-: Adjusts volume up or down.
• MENU: Accesses the main menu for settings and features.
• OK: Confirms selections.
• EXIT: Exits current menu or function.
• EPG: Displays the Electronic Program Guide.
• PVR: Initiates Personal Video Recording (requires USB storage).
• TIMESHIFT: Pauses live TV (requires USB storage).

4.2 Electronic Program Guide (EPG)

Press the 'EPG' button on your remote control to view the 7-day program schedule. You can navigate through channels and times to see upcoming shows and set reminders or recordings (if PVR is enabled).

4.3 PVR and TimeShift Functions

To use PVR (Personal Video Recorder) or TimeShift, connect a USB storage device (e.g., USB flash drive or external hard drive) to the USB 2.0 port on the front panel of the Set Top Box. You can then record live TV or pause and resume live broadcasts.

4.4 Multimedia Playback

The USB 2.0 port also supports playback of various media files from a connected USB storage device. The Set Top Box is compatible with common video, audio, and photo formats.

4.5 YouTube Functionality (Optional)

The ISDB-T receiver has built-in YouTube software. To access YouTube videos, you need to plug a USB Wifi Dongle (not included, sold separately) into the USB port on the front panel to connect the device to your network.

Figure 4: YouTube Interface via USB Wifi Dongle (Dongle sold separately)

4.6 Video Overview

5. Maintenance

5.1 Cleaning

• Unplug the device before cleaning.
• Use a soft, dry cloth to wipe the exterior of the Set Top Box.
• Do not use liquid cleaners or aerosol sprays.

5.2 Storage

When not in use for extended periods, store the Set Top Box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

6.1 No Picture or Sound / Flickering Screen

• Check TV Input: Ensure your TV is set to the correct input source (HDMI or AV) where the Set Top Box is connected.
• Check Connections: Verify that all cables (antenna, HDMI/RCA, power) are securely connected.
• Adjust TV System: Access the Set Top Box's menu (usually via the 'MENU' button on the remote). Navigate to 'Channels' or 'Picture'/'Sound' settings. If you are unsure of your region's TV system (e.g., Pal for South America), select 'Auto' for automatic matching.
• Rescan Channels: Perform a channel scan again to ensure all available channels are detected.

6.2 Remote Control Not Working

• Check if the batteries are correctly inserted and not depleted. Replace if necessary.
• Ensure there are no obstructions between the remote control and the Set Top Box.

7. Specifications

7.1 Hardware

• CPU: MSTAR-MSD7805 (128 pin) MIPS 34Kf@600MHz
• Memory: 32X16Mbit DDR2: Frequency 1066
• Flash: 32M bytes
• Demodulator Type: ISDB SOC Chip Set
• TUNER: Rafael R836
• Front Panel: USB 2.0 Host, 4-digit LED display, Red LED (Standby), Green LED (Lock), Panel Keys (POWER, CH+, CH-)
• Rear Panel: Tuner RF input (EC-type IEC169-2 Female), Tuner RF Loop through (IEC-type IEC169-24 Male), HDMI-compatible V1.3/V1.4, RCA CVBS AL AR Connector x1, Ypbpr RCAx1, Coaxial x1
• Power: AC100~240V 50Hz/60Hz

7.2 Demodulation

• Terrestrial Receiver Standard: ISDB-T broadcast (1, 3, 13 segment)
• Input RF Frequency: VHF: 177.143~213.143 MHz; UHF: 473.143~803.143MHz
• Bandwidth: 6MHz
• Demodulation: QPSK / 16QAM / 64QAM/QPSK or DQPSK
• FEC: 1/2, 2/3, 3/4, 5/6, 7/8 Automatic
• Guard Interval: 1/4, 1/8, 1/16, 1/32
• FFT Mode: 2K/ 8K/32K
• Input level: -83 to -5dBm

7.3 Software Features

• Supports all ISDB-T broadcast (1, 3, 13 segment)
• MPEG-2/MPEG-4 AVC/H.264 HD/SD Video, DiVX compliant
• Support 3D interface
• Support teletext / subtitle / multi-language
• Supported 7-Day EPG function, VBI Teletext
• Aspect Ratios: AUTO, 16:9 Pillar Box, 16:9 Pan G Scan, 4:3 Letter Box, 4:3 Pan G Scan, 4:3 Full, 16:9 Wide Scr
• USB 2.0 for PVR, TIMESHIFT, software upgrade and media files playback
• Video output resolution: 480i/576i/480p/576p/720p/1080i/1080P

7.4 Video Decoder

• Compliant with: MPEG-4 part10/MPEG-2 ISO/IEC 13818
• MPEG-4 Simple/Main/Advanced Profile@ LEVEL3 (10Mbps)
• MPEG-2 Main Profile# Main Level (15Mbps)
• H.264 MP#L3 (10Mbps).H.264 HP L4.1(25Mbps)

7.5 Audio Decoder

• MPEG-1, MPEG-2 (Layer I/II), MP3, AC-3 (Dolby Digital), AAC-LC, WMA
• E-AC-3 (Dolby Digital Plus) decoding HE-AAC 5.1 multi-channel decoding

7.6 Multimedia Features

• Media Codec: avi, mpg, dat, vob, div, mov, mkv, jpeg, ts etc.
• Audio Codec: WMA, MP3, AAC (.wma, .mp3, m4a)
• Photo Codec: JPEG, BMP, PNG

Figure 5: Supported Video Resolutions

8. User Tips

• The ISDB-T receiver is confirmed to be compatible and available for use in Chile.
• The package includes both HDMI-compatible and RCA cables, ensuring compatibility with both smart TVs and older television models.
• If you experience a flickering TV screen or no sound, first verify your TV's input mode. Then, access the Set Top Box's 'Channels' or 'Picture'/'Sound' menu and try selecting 'Auto' for the TV system setting if you are unsure of your region's specific standard.
• For YouTube access, remember that a USB Wifi Dongle is required and must be purchased separately.

9. Warranty and Support

The ICANING ISDB-T Set Top Box is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For technical support or further inquiries, please refer to the contact information provided by your retailer or the official ICANING website.