Midea MKE17H1ASS-S

Contents

Midea Electric Kettle

Model: MKE17H1ASS-S

User Manual

1. Introduction

Thank you for purchasing the Midea MKE17H1ASS-S Electric Kettle. This appliance is designed for efficient and safe water boiling with advanced temperature control features. Please read this manual carefully before use to ensure proper operation and maintenance.

Midea Electric Kettle MKE17H1ASS-S

Figure 1: Midea Electric Kettle MKE17H1ASS-S

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

  • Read all instructions.
  • Do not touch hot surfaces. Use handles or knobs.
  • To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or electric kettle in water or other liquid.
  • Close supervision is necessary when any appliance is used by or near children.
  • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
  • Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
  • The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
  • Do not use outdoors.
  • Do not let cord hang over edge of table or counter, or touch hot surfaces.
  • Do not place on or near a hot gas or electric burner, or in a heated oven.
  • Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
  • Do not use appliance for other than intended use.
  • The kettle is equipped with a Strix temperature control system, providing automatic shut-off once the desired temperature is reached.
  • It features boil-dry protection and overheat protection, automatically switching off if water levels are too low or if the kettle overheats.
  • The appliance is designed with anti-electric shock technology for enhanced safety.
  • Proper disposal: This product is marked with the WEEE symbol (Waste Electrical and Electronic Equipment). Ensure proper disposal according to local regulations. WEEE number: DE 5703080.
Safety features icons: Automatic Shut-off, Dry-boil protection, Overheat protection, Anti-Electric Shock

Figure 2: Integrated Safety Technologies

3. Product Overview

Components

  • Kettle Body (Stainless Steel)
  • Lid (with one-touch opening mechanism)
  • Handle with Control Panel (Power, Temperature Selection, Keep Warm buttons, Digital Display)
  • Water Level Window (with MIN/MAX markings)
  • Spout with Removable Filter
  • 360-Degree Rotational Power Base
  • Power Cord Storage (under the base)

Key Features

  • Variable Temperature Control: Six preset temperatures (40°C, 60°C, 70°C, 80°C, 90°C, 100°C) for various beverages.
  • Rapid Boil: 2200W power boils 1.7 liters of water in under 5 minutes.
  • Keep Warm Function: Maintains selected temperature for up to 60 minutes.
  • Large Capacity: 1.7 liters, sufficient for approximately 7 cups (250ml each).
  • Safety Features: Automatic shut-off, boil-dry protection, overheat protection, anti-electric shock.
  • Convenient Design: Large filling opening, water level window, removable filter, 360° rotational base, integrated cable storage.
Kettle features: Spout and filter, water level window, cord storage

Figure 3: Kettle Components (Spout & Filter, Water Window, Cord Storage)

Kettle handle with temperature settings for milk, honey water, white tea, green tea, French press coffee, dark tea

Figure 4: Variable Temperature Control Panel

4. Setup

  1. Unpack: Carefully remove the kettle and all accessories from the packaging. Retain packaging for future storage or transport.
  2. Position: Place the power base on a stable, flat, heat-resistant surface, away from the edge of the counter.
  3. Cable Management: Adjust the length of the power cord by winding it around the cord storage area under the base. Plug the power cord into a suitable wall outlet.
  4. First Use Cleaning: Before first use, fill the kettle with fresh water to the MAX level. Boil the water at 100°C and then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
Underside of kettle base showing integrated cable storage

Figure 5: Power Cord Storage under Base

5. Operating Instructions

  1. Fill the Kettle: Press the lid release button to open the lid (opens to 75°). Fill the kettle with fresh water, ensuring the water level is between the MIN (0.3L) and MAX (1.7L) marks on the water level window. Close the lid securely.
  2. Place on Base: Place the kettle firmly onto the power base.
  3. Select Temperature: Use the temperature selection buttons on the handle to choose your desired temperature (40°C, 60°C, 70°C, 80°C, 90°C, 100°C). The digital display will show the selected temperature.
  4. Start Boiling: Press the Power button (usually indicated by a power symbol) to start the heating process. The display will show the water's real-time temperature as it heats.
  5. Keep Warm Function:
    • Single Press: If you press the Keep Warm button once, the kettle will heat water to the target temperature and then automatically enter keep warm mode for up to 60 minutes.
    • Double Press: If you press the Keep Warm button twice, the kettle will first boil the water to 100°C, then cool down to the target temperature, and finally maintain that temperature for up to 60 minutes.
  6. Automatic Shut-off: The kettle will automatically switch off once the selected temperature is reached or after the keep warm cycle completes.
  7. Pouring: Carefully lift the kettle from the base and pour the hot water.
Kettle lid opening to 75 degrees for easy filling

Figure 6: One-Touch Lid Opening

Kettle handle with digital temperature display

Figure 7: Digital Temperature Display on Handle

6. Maintenance and Cleaning

Regular cleaning and maintenance will prolong the life of your kettle and ensure optimal performance.

  1. Before Cleaning: Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
  2. Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as these can scratch the stainless steel finish. Never immerse the kettle body or power base in water.
  3. Interior Cleaning (Descaling): Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas.
    • Fill the kettle with a mixture of one part white vinegar and two parts water.
    • Boil the mixture and let it stand for at least 30 minutes, or longer for heavy buildup.
    • Discard the mixture and rinse the kettle thoroughly with fresh water several times.
    • For stubborn stains, a non-abrasive descaling solution designed for kettles can be used following the product's instructions.
    The large filling opening facilitates easy access for interior cleaning.
  4. Filter Cleaning: The removable filter in the spout helps prevent limescale from entering your cup.
    • Remove the filter by gently pulling it upwards from its slot in the spout.
    • Rinse the filter under running water and brush away any deposits with a soft brush.
    • Reinsert the filter firmly into its slot.
Close-up of the kettle's wide opening for easy filling and cleaning

Figure 8: Large Filling Opening for Easy Cleaning

Close-up of the removable filter in the kettle spout

Figure 9: Removable Spout Filter

7. Troubleshooting

ProblemPossible CauseSolution
Kettle does not turn on.No power supply; Kettle not properly seated on base.Check if the power cord is securely plugged into the outlet. Ensure the kettle is correctly placed on the power base.
Water is not heating.Power button not pressed; Incorrect temperature setting.Press the Power button. Verify that a temperature has been selected.
Kettle switches off too quickly.Boil-dry protection activated; Overheat protection activated.Ensure the kettle has sufficient water (above MIN level). Allow the kettle to cool down before refilling and restarting.
Limescale buildup inside.Hard water deposits.Descale the kettle as described in the "Maintenance and Cleaning" section.

8. Specifications

AttributeValue
BrandMidea
ModelMKE17H1ASS-S
Capacity1.7 Liters
Power2200W
Voltage220V
Shell MaterialStainless Steel
Automatic Shut-offYes
Thermal InsulationYes (Keep Warm Function)
Scale MarkScale Window
FunctionsSafety Auto-Off, Overheat Protection, Temperature Control
Feature360 Degree Rotational Base
Heating MethodUnderpan Heating
CertificationCE
Dimensions (L x W x H)24 cm x 22 cm x 18 cm
Weight1.25 kg

9. User Tips

  • For the best flavor, use the specific temperature settings for different types of tea (e.g., 70°C for white tea, 80°C for green tea) and coffee (90°C for French press).
  • Utilize the 60-minute keep warm function if you need hot water over an extended period without re-boiling.
  • Regularly check the water level window to ensure you fill the kettle between the MIN and MAX marks to prevent boil-dry situations or overfilling.
  • Clean the removable filter periodically to maintain water quality and prevent limescale buildup in your beverages.

10. Warranty and Support

Midea products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, service, or warranty claims, please contact your retailer or the official Midea customer service in your region. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.