FUNLAB FF02

Contents

FUNLAB FF02 Luminous Ergonomic Joypad Controller User Manual

Model: FF02

Introduction

Thank you for choosing the FUNLAB FF02 Luminous Ergonomic Joypad Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller to ensure an optimal gaming experience on your Nintendo Switch, Switch OLED, or Switch Lite.

FUNLAB FF02 Luminous Ergonomic Joypad Controller
FUNLAB FF02 Luminous Ergonomic Joypad Controller

Setup Instructions

Attaching to Nintendo Switch Console

  1. Ensure your Nintendo Switch console is powered on and updated to the latest system software.
  2. Slide the left and right controller units onto the side rails of your Nintendo Switch console until you hear a click. The controllers will automatically connect to the console.
  3. The console will recognize the controllers, and they will be ready for use in handheld mode.

Initial Charging

The controller units are powered by the Nintendo Switch console when attached. For optimal performance, ensure your console has sufficient battery charge or is connected to its power adapter during extended gaming sessions.

Operating Instructions

Hidden-til-lit Display

The controller features a unique hidden-til-lit display. The surface decoration of the controller design is seamlessly harmonized with lighting effects. When the LED is not active, it appears as a pure black controller. When activated, the hidden pattern will illuminate, enhancing your gaming experience.

Controller with Hidden-til-lit display active
The controller's hidden pattern illuminates when LEDs are active.

Polychrome Breathing LED Control

The controller features 7 LED colors: blue, red, yellow, green, purple, orange, and white. You can choose between side light + surface light or side light only, both offering always-on and breathing light modes.

  • Side light + Surface light:
    • Single Click: Press the T button + R3/L3 (press down) once. Both lights will turn on and remain steady. Each subsequent single click will cycle through the colors.
    • Double Click: Double-click the T button + R3/L3 (press down). Both lights will enter Breathing Light Mode, with colors changing automatically in a slow cycle.
  • Side light Only:
    • Single Click: Press the T button + "+"/"-" once. The side light will turn on and remain steady. Each subsequent single click will cycle through the colors.
    • Double Click: Double-click the T button + "+"/"-". The side light will enter Breathing Light Mode, with colors changing automatically in a slow cycle.
Controller with 7-color breathing LEDs
Demonstration of the 7-color breathing LED effects.
Video demonstrating the luminous features and color changes of the controller.

Turbo Function

The controller supports a Turbo function with three speeds for continuous input, suitable for various game genres.

  1. To set Manual Turbo Function: In any mode, press the Turbo Button + A/B/X/Y/L1/L2/R1/R2/D-pad/SR (Left&Right)/SL (Left&Right) Button once. Now, pressing and holding the selected button will result in continuous input.
  2. To set Automatic Turbo Function: Press the Turbo Button + A/B/X/Y/L1/L2/R1/R2/D-pad/SR (Left&Right)/SL (Left&Right) Button a second time. The selected button will automatically provide continuous input without needing to be held down.
  3. To clear Turbo Function: Press the Turbo Button + A/B/X/Y/L1/L2/R1/R2/D-pad/SR (Left&Right)/SL (Left&Right) Button a third time to clear the Turbo function for that specific button.
Controller with 3 speeds of turbo
The controller offers 3 speeds of turbo for rapid actions.

Mapping Function (Back Paddle Buttons)

The controller features programmable back paddle buttons (MR/ML) for enhanced control.

  1. Press and hold the M Button on the right or left side of the controller.
  2. While holding the M Button, input the single button you wish to map (e.g., A, B, X, Y, L1, R1, L2, R2, L3, R3, +, -, D-pad Buttons).
  3. Release the M Button. The controller will vibrate to indicate successful mapping.
  4. Now, pressing the MR/ML Button (corresponding to the side you mapped) will trigger the mapped function.
Controller with pro-level back buttons
Pro-level back buttons for personalized control setups.

Vibration Function

The controller provides immersive vibration feedback, bringing actions to life in your hands. The intensity of the vibration is dynamic and adjusts to in-game events.

Controller with vibration function
Immersive vibration brings every action to life.

Ergonomic Design and Precise Control

The controller features a diamond-textured grip for anti-slip performance and an ergonomic radian design for comfortable long gaming sessions. It offers precise motion control for sharp and responsive in-game movements.

Controller ergonomic design
Ergonomic design for comfortable gaming.
Controller showing precise control
Unmatched accuracy for sharp and responsive control.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the surface of the controller. Do not use liquid cleaners or solvents.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: The controller contains a built-in battery. Avoid fully discharging the battery for extended periods. If not used for a long time, charge it periodically to maintain battery health.

Troubleshooting

ProblemPossible Cause / Solution
Controller not connecting to Switch.
  • Ensure the controllers are properly slid onto the console rails until they click into place.
  • Check if the Switch console's system software is up to date.
  • Restart the Nintendo Switch console.
LED lights are not working.
  • Ensure the controller is properly connected and powered.
  • Follow the "Polychrome Breathing LED Control" instructions to activate the lights.
Buttons or joysticks are unresponsive.
  • Ensure the controller is securely attached to the console.
  • Restart the Nintendo Switch console.
  • Clean any debris around the buttons or joysticks.

Specifications

FeatureDetail
Brand NameFUNLAB
Model NumberFF02
TypeGamepads
Interface TypeBluetooth
Compatible PlatformNintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite
ABXY Switch TypeTactile switch
Bumpers Switch TypeTactile switch
RGB Lighting JoysticksYes
Battery IncludedYes
Joystick Sensor Module Brand/TypePOLYSHINE
Trigger Button TypeNon-Linear
Package Dimensions (L x W x H)14 cm x 14 cm x 7 cm
Package Weight0.33 kg
CertificationCE

User Tips

  • NFC Functionality: Please note that this controller does not support NFC for Amiibo functionality.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your FUNLAB FF02 controller, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.

© 2024 FUNLAB. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.