1. Introduction
The GUWIEYG Type 2 V2L Discharger Adapter is designed to convert the high-voltage DC power from your electric vehicle (EV) battery into standard AC power, allowing you to power external electrical appliances. This adapter is compatible with Type 2 EVs that support Vehicle-to-Load (V2L) functionality and features a Brazil plug socket for connecting devices.

Figure 1: GUWIEYG Type 2 V2L Discharger Adapter
2. Safety Information
- Always ensure the adapter is securely connected to your EV's Type 2 port before plugging in any appliances.
- Do not use the adapter if it appears damaged or if any part of the electrical system is exposed.
- Avoid exposing the adapter to extreme moisture or liquids. The IP44 rating provides protection against solid objects larger than 1mm and splashing water, but it is not waterproof.
- Ensure the total power consumption of connected appliances does not exceed the adapter's maximum output (16A, 220V).
- Keep children and pets away from the adapter during operation.
- The adapter is made from UL94V-0 fireproof materials for enhanced safety.
3. Package Contents
- GUWIEYG Type 2 V2L Discharger Adapter
- Storage Bag
- User Manual

Figure 2: Storage bag included with the adapter
Video 1: Unboxing and overview of the V2L Discharger Adapter.
4. Setup and Installation
- Prepare your EV: Ensure your electric vehicle's Vehicle-to-Load (V2L) function is activated. This setting is typically found in your EV's infotainment system or vehicle settings menu. Refer to your EV's owner's manual for specific instructions on activating V2L.
- Connect the adapter to your EV: Open the charging port cover on your EV. Insert the Type 2 end of the GUWIEYG V2L Discharger Adapter firmly into the EV's Type 2 charging port. Ensure it clicks into place.
- Connect your appliance: Open the cover on the Brazil plug socket of the adapter. Plug your desired electrical appliance into the Brazil plug socket. The adapter is suitable for Type N (Brazil) plugs.

Figure 3: Ensure V2L function is activated on your EV.
5. Operating Instructions
- Power On: Once the adapter is connected to your EV and the appliance is plugged in, press the 'Power Switch' button located on the side of the adapter to turn on the power output.
- Powering Appliances: Your appliance should now receive AC power from your EV. The adapter supports a wide range of devices for various applications, such as camping, outdoor events, or emergency power.
- Power Off: To stop providing power, press the 'Power Switch' button again. Disconnect the appliance first, then remove the adapter from your EV's charging port.

Figure 4: Power off button on the adapter.

Figure 5: Examples of devices supported by the V2L adapter.
6. Maintenance
- Cleaning: Wipe the adapter with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the adapter is disconnected from all power sources before cleaning.
- Storage: When not in use, store the adapter in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the adapter for any signs of wear, damage, or loose connections. If any issues are found, discontinue use and contact support.
7. Troubleshooting
- No power output:
- Ensure the adapter is fully inserted into the EV's Type 2 port.
- Verify that the EV's V2L function is activated.
- Check if the 'Power Switch' button on the adapter has been pressed to turn on the output.
- Confirm the appliance is correctly plugged into the Brazil plug socket.
- Check the appliance itself to ensure it is functioning correctly.
- Appliance not working or tripping:
- The total power consumption of connected devices might exceed the adapter's maximum capacity (16A, 220V). Disconnect some devices or use lower-power appliances.
- Ensure the appliance is compatible with the output voltage range of 90V-250V.
- Adapter feels hot: It is normal for the adapter to warm up during operation. However, if it becomes excessively hot or emits a burning smell, immediately disconnect it from the EV and all appliances.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GUWIEYG |
| Adapter Type | IEC62196 V2L DISCHARGER BRAZIL PLUG |
| Voltage Input/Output | 90V-250V |
| Max Current | 16A |
| Max Voltage | 220V |
| Operating Temperature | -30°C to +50°C |
| IP Rating | IP44 |
| Material | ABS+PC+COOPER+SLIVER (UL94V-0 Fireproof) |
| Weight | 410g |
| Package Dimensions (L x W x H) | 21cm x 9cm x 8cm |
| Package Weight | 0.412kg |
| High-concerned chemical | None |

Figure 6: Max Current and Voltage Specifications.

Figure 7: Internal materials and safety features.
9. User Tips
- Vehicle Compatibility: This adapter is designed for Type 2 electric vehicles that support V2L functionality. While it is confirmed to support models like MG and BYD, and is compatible with the Brazil plug standard, always verify your specific EV model's V2L capabilities and plug type before use.
- Outdoor Use: The IP44 rating makes it suitable for outdoor use with protection against splashing water. However, avoid submerging it or using it in heavy rain.
- Powering Multiple Devices: When powering multiple devices, ensure their combined wattage does not exceed the adapter's maximum output to prevent overloading.
- Activating V2L: Some EV models require the V2L function to be explicitly activated through the vehicle's settings or a dedicated button. If you experience no power output, double-check this setting in your car.
10. Certifications
This product has received a Certificate of Conformity and bears the CE mark, indicating compliance with European health, safety, and environmental protection standards.

Figure 8: Product Certifications.
11. Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the GUWIEYG customer support team or your retailer. Please have your product model and purchase information ready when contacting support.