1. Product Overview
The JIKONG JK-B2A8S20P Smart Battery Management System (BMS) is an intelligent protection board designed for large capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, and over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote functionality.
This BMS is compatible with various battery chemistries, including Lithium Iron Phosphate (LiFePO4), Ternary Lithium, and Lithium Titanate (LTO) batteries. Its core active balancing technology, with a continuous balancing current of 1A or 2A, ensures battery consistency, extends battery range, and delays aging. The system supports a mobile application (APP) for Android and iOS, allowing users to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth.
The compact design and comprehensive features make this BMS suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

2. Specifications
2.1. General Parameters
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 10-36 | V |
| Operating Power Consumption | <900 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 8 | Strings |
| Maximum Balancing Current | 2 | A |
| Maximum Charging Current | 200 | A |
| Maximum Discharge Current | 200 | A |
| Maximum Instantaneous Current | 400 | A |
| Maximum Internal Loop Resistance | 0.4 | mΩ |
| Protective Plate Size (L×W×H) | 153×126×17.6 | mm |
| Finished Weight | 349 | g |

2.2. Default Parameters (JK-B2A8S20P)
The following table outlines the default protection parameters for the JK-B2A8S20P model, categorized by battery type. These values can be adjusted via the mobile APP.
| Parameter | LI-ION (Default) | LIFEPO4 (Default) | LTO (Default) | Unit |
|---|---|---|---|---|
| Balancing Initial Voltage | 3 | 3 | 2 | V |
| Maximum Balancing Current | 2 | 2 | 2 | A |
| Monomer Overcharge Voltage | 4.2 | 3.6 | 2.7 | V |
| Single Overcharge Protection Recovery | 4.18 | 3.55 | 2.65 | V |
| Monomer Undervoltage Protection | 2.82 | 2.6 | 1.8 | V |
| Single Undervoltage Protection Recovery | 2.85 | 2.65 | 1.85 | V |
| Automatic Shutdown Voltage | 2.8 | 2.5 | 1.7 | V |
| SOC-0% Voltage | 2.9 | 2.6 | 1.85 | V |
| SOC-100% Voltage | 4.18 | 3.5 | 2.65 | V |
| Trigger Balancing Differential Pressure | 0.01 | 0.01 | 0.01 | V |
| Charging Overcurrent Protection Delay | 30 | 30 | 30 | S |
| Charging Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Discharge Overcurrent Protection Delay | 300 | 300 | 300 | S |
| Discharge Overcurrent Protection Release Time | 60 | 60 | 60 | S |
| Short-circuit Protection Delay | 1500 | 1500 | 1500 | µS |
| Short-circuit Protection Release Time | 60 | 60 | 60 | S |
| Charging Overtemperature Protection | 70 | 70 | 70 | °C |
| Charging Overtemperature Recovery | 60 | 60 | 60 | °C |
| Discharge Overtemperature Protection | 70 | 70 | 70 | °C |
| Discharge Overtemperature Recovery | 60 | 60 | 60 | °C |
| Charging Low Temperature Protection | -20 | -20 | -20 | °C |
| Charging Low Temperature Recovery | -10 | -10 | -10 | °C |
| MOS Overtemperature Protection | 100 | 100 | 100 | °C |
| MOS Overtemperature Recovery | 80 | 80 | 80 | °C |
| Device Address | 0 | 0 | 0 | / |
| Discharge Precharge Time | 0 | 0 | 0 | S |

2.3. Physical Dimensions

3. Package Contents
The standard package for the JIKONG JK-B2A8S20P includes the following items:
- BMS Unit x 1
- Sampling Cable x 1 (70cm long)
- NTC Temperature Sensor x 1 (40cm long)
- Switch Key x 1 (50cm long)
- 4.3-inch Touch Display x 1

4. Setup and Wiring
4.1. Unpacking and Initial Inspection
Upon receiving your JIKONG Smart BMS, please follow these guidelines:
- Handle the packaging box and the protection board gently. Avoid dropping or inverting the package.
- Before opening, inspect the packaging for any signs of impact marks or damage.
- Carefully remove all components from the package and verify against the packing list.
4.2. Wiring Instructions
The JK-BxA8S-20P series protection board is suitable for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all connections are correct and secure before powering on the BMS.
- Connect all balance cables to the battery cells first, ensuring correct polarity and sequence (B-, B1, B2, ..., B8).
- Insert the balance cable connector into the corresponding port on the BMS.
- Connect the main negative terminal (B-) of the battery pack to the B- terminal on the BMS.
- Connect the main positive terminal (P+) of the battery pack to the P+ terminal on the BMS (if applicable, or ensure the load/charger positive connects to the battery positive).
- Connect the load and charger to the P- terminal of the BMS and the battery pack's positive terminal.
Wiring Diagram for 8-String Cells

Wiring Diagram for 4-String Cells

4.3. Connector Definitions
The BMS features several connectors for various functions. Refer to the following table for pin definitions:
| Connector | Pin No. | Name | Definition |
|---|---|---|---|
| P1 (Balance & Acquisition) | 1 | B- | Total negative battery |
| 2 | B1 | The first battery positive | |
| 3 | B2 | The second battery positive | |
| 4 | B3 | The third battery positive | |
| 5 | B4 | The fourth battery positive | |
| 6 | B5 | The fifth battery positive | |
| 7 | B6 | The sixth battery positive | |
| 8 | B7 | The seventh battery positive | |
| 9 | B8 | The eighth battery positive | |
| 10 | B+ | Protection board power supply, connected to the battery positive | |
| P2 (Heating Interface) | 1 | HT- | Heater element negative electrode (HT-), Charge indication input positive (CD+), Charge indication input negative (CD-) |
| 2 | HT- | ||
| 3 | HT- | ||
| 4 | HT- | ||
| 5 | HT- | ||
| P2 (Charge Indication) | 6 | CD+ | Charge indication input positive terminal |
| 7 | CD- | Charge indication input negative terminal | |
| P3 (Display Interface) | 1 | VCC | Display power output |
| 2 | A | The display RS485 signal is positive | |
| P4 (GPS Interface) | 1 | VGPS | Power output, voltage close to B+ |
| 2 | TX | UART_TX, 3.3V | |
| 3 | RX | UART_RX, 3.3V | |
| 4 | GND | Power/signal ground | |
| P5 (Communication Interface) | 1 | DN | CAN_L/RS485-B signal negative |
| 2 | DP | CAN_H/RS485-A signal positive | |
| 3 | GND | Signal ground | |
| P6 (Temperature Interface) | 1 | T1A | First temperature sensor pin A |
| 2 | T1B | First temperature sensor pin B | |
| 3 | T2A | Second temperature sensor pin A | |
| 4 | T2B | Second temperature sensor pin B |

4.4. Device Activation
Before powering on the protection board, double-check that the balance cables are properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery cells. Incorrect connections can lead to malfunctions or damage.
The BMS does not have a physical power-on switch. It is designed for charging activation: connect a charger with a voltage 2V higher than the battery voltage to activate the board. Alternatively, if you have the optional display and button, you can activate the BMS by inserting the display cable and pressing the button.
5. Operation
5.1. Mobile APP Installation and Usage
To install the mobile APP, scan the QR code below. The APP requires Android version 7 or higher.

The APP allows you to monitor battery status, modify protection parameters, and control various functions via Bluetooth. It supports iOS, Android, and HarmonyOS systems.

5.2. Active Equalization
The BMS utilizes energy transfer active balancing. In the APP's parameter settings, you can configure the balance trigger differential pressure (mV). Balancing automatically activates when the voltage difference between any two battery strings exceeds the set value and deactivates when it falls below the set value. The default balance current is 2A. Adjust the balance current based on your battery capacity, ensuring it does not exceed 0.2C of the battery capacity. The balancing function can be disabled via the BMS control page in the APP if not required.

5.3. Optional Features
- GPS and Display Interface: The BMS includes a dedicated GPS interface for optional GPS modules, allowing for battery location tracking. A display interface is also provided for connecting JIKONG's dedicated display units (e.g., 4.3-inch display) to view battery information directly.
- Heating Function: An optional heating function can be enabled to warm the battery in low-temperature conditions using a resistance heater or heating film. This prevents reduced battery activity and ensures proper charging/discharging. The designed heating current is 4A. It is recommended to install a normally closed temperature switch (45-65°C) in series with the heating circuit as a secondary safety measure.
- Communication Function (CAN/RS485): The BMS supports optional CAN/RS485 communication. Users can select the desired protocol and configure the address and communication parameters via the APP.
- Intelligent Sleep: This standard function allows the BMS to enter a low-power sleep mode when idle (charge/discharge current less than 1A for 26 consecutive hours) to reduce self-consumption. The BMS can be reactivated by pressing the switch button or connecting a charger.
- Discharge Precharge Function: An optional discharge precharge function is available. The default precharge time is 5 seconds. This can be enabled or disabled via the APP.


6. Maintenance
To ensure the longevity and optimal performance of your JIKONG Smart BMS, regular maintenance is recommended:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion. Ensure the BMS unit is securely mounted and free from physical damage.
- Software Updates: Keep the mobile APP and BMS firmware updated to the latest versions to benefit from performance improvements and new features.
- Environmental Conditions: Operate the BMS within the specified temperature range (-30°C to 70°C). Avoid exposure to excessive moisture, dust, or corrosive environments.
- Cleaning: Gently clean the exterior of the BMS with a dry, soft cloth. Do not use harsh chemicals or solvents.
- Parameter Review: Occasionally review the BMS parameters in the APP to ensure they are still appropriate for your battery pack's condition and usage patterns.
The BMS features a fully aluminum alloy shell designed to reduce damage from the external environment and protect internal electronic components. This anti-voltage and anti-vibration design, with high-strength insulating material, absorbs vibration and external pressure during use.

7. Troubleshooting and Protection Features
The JIKONG Smart BMS is equipped with comprehensive protection features to safeguard your battery pack. When a protection event occurs, the BMS will take action to prevent damage. Most protection parameters can be viewed and adjusted via the mobile APP.
- Overcharge Protection: If any cell voltage exceeds the set overcharge protection voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages drop below the overcharge recovery voltage.
- Over-discharge Protection: If any cell voltage drops below the set undervoltage protection voltage during discharge, the BMS will stop discharging. Discharging resumes when all cell voltages rise above the undervoltage recovery voltage. If any cell drops below the automatic shutdown voltage, the BMS will automatically shut down.
- Overcurrent Protection (Charge/Discharge): If the charging or discharging current exceeds the set continuous current for a specified delay, the BMS will interrupt the respective operation. It will resume after the set overcurrent release time.
- Overtemperature Protection (Charge/Discharge): If the battery temperature exceeds the set overtemperature protection value, the BMS will stop charging or discharging. Operation resumes when the temperature falls below the recovery value.
- Low Temperature Protection (Charge): If the battery temperature drops below the set low temperature protection value during charging, the BMS will stop charging. Charging resumes when the temperature rises above the recovery value. For extremely cold environments, consider using the optional heating function.
- Short Circuit Protection: The BMS provides standard short-circuit protection. If a short circuit is detected, the BMS will cut off power. The delay and recovery time for short-circuit protection can be adjusted in the APP. If a short circuit occurs during initial connection of a charger or load, increasing the delay time may resolve the issue.
- Emergency Switch: In critical situations (e.g., over-temperature, over-discharge, overcharge, cell string drop), activating the emergency switch in the APP's BMS control page will allow the BMS to operate for 30 minutes, even if cell voltages reach automatic shutdown levels, to provide emergency power.
8. User Tips
- Initial Setup: Always double-check all wiring, especially balance leads and main power connections (B- and P-), before activating the BMS to prevent damage.
- Parameter Customization: Take advantage of the mobile APP to fine-tune protection parameters (e.g., voltage thresholds, current limits) to perfectly match your specific battery chemistry and application requirements.
- Cold Weather Operation: If operating in cold climates, consider installing the optional heating module and configuring its settings via the APP to maintain optimal battery performance and charging efficiency.
- Monitoring: Regularly use the mobile APP or the 4.3-inch display to monitor your battery's real-time status, including individual cell voltages, temperatures, and current, to catch potential issues early.
- Firmware: Keep your BMS firmware updated through the APP to ensure you have the latest features and bug fixes.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official JIKONG documentation or contact your seller. A comprehensive user manual in PDF format is available for download, providing in-depth guidance on all aspects of the product.
You can access the user manual PDF here.