Introduction
This manual provides instructions for the use and maintenance of your replacement remote control, designed for compatibility with various home theater video projectors including RCA RPJ106, RPJ116-PLUS, RPJ065, Supersonic SC-80P, Tontion L8, and Vilinice VL208. This high-quality replacement remote ensures full functionality for your projector's essential features.
Setup
1. Battery Installation
The remote control requires two AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
2. Initial Use
This remote control is a replacement unit and typically does not require programming. Once batteries are installed, it should be ready for immediate use with compatible projector models. Point the remote directly at your projector's IR receiver.
Operating Instructions
The remote control features a standard layout for projector functions. While the button layout may not be identical to your original remote, the functions are designed to be compatible. Refer to the image below for a visual guide to the buttons.
| Button | Function |
|---|---|
| Power (Red) | Turns the projector On/Off. |
| Source (Green) | Selects input source (HDMI, USB, etc.). |
| Play/Pause, Fast Forward, Rewind | Media playback controls. |
| VOL+, VOL- | Adjusts volume up or down. |
| FLIP | Flips the projected image. |
| ZOOM | Adjusts the zoom level of the image. |
| Directional Pad (Up, Down, Left, Right) | Navigates menus and selections. |
| OK | Confirms selections. |
| MENU | Accesses the projector's main menu. |
| EXIT | Exits current menu or function. |
| Numeric Keypad (0-9) | Direct input for channels or other numerical settings. |
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's performance degrades or if it stops responding. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
- Avoid Damage: Do not drop the remote, expose it to extreme temperatures, or immerse it in liquids.
Troubleshooting
- Remote not responding:
- Check if the batteries are installed correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote and the projector's IR receiver.
- Make sure you are within the effective range and pointing the remote directly at the projector.
- Specific buttons not working:
- Some projector models may not support all functions present on the remote. Verify your projector's manual for supported features.
- If the remote is a replacement, some button functions might differ slightly from the original. Experiment with similar-looking buttons.
- Interference: Strong light sources or other infrared devices can sometimes interfere with the remote's signal. Try operating the remote in a different environment.
Specifications
| Feature | Detail |
|---|---|
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Use | Universal, Projectors |
| Compatible Projector Models | RCA RPJ106, RPJ116-PLUS, RPJ065; Supersonic SC-80P; Tontion L8; Vilinice VL208 |
| Battery Type | 2 x AAA (not included) |
| Support APP | No |
| High-concerned chemical | None |
| Color | Black |
| Origin | Mainland China |
Warranty and Support
This remote control comes with a 3-month warranty. Additionally, a 90+ days money-back return policy is available. For any doubts, issues, or to confirm suitability if your projector model is not explicitly listed, please contact the seller directly. Providing a photo and the exact model of your device (or old remote) can help expedite support.
User Tips
- For optimal performance, use high-quality alkaline batteries.
- If you experience intermittent issues, try cleaning the remote's infrared emitter (the small LED at the front) and the projector's IR receiver with a soft cloth.
- Keep the remote away from direct sunlight or strong heat sources to prevent damage to internal components.
