SEMBO BLOCK 106001, 106002

Contents

SEMBO BLOCK Robot Mecha Model Assembly Instructions

Models: 106001 (Sun Wukong) & 106002 (Holy Spirit - Ne Zha)

1. Introduction

This manual provides detailed instructions for assembling your SEMBO BLOCK Robot Mecha model. These building block sets allow you to construct intricate robot figures inspired by the Journey to the West series. Please follow the steps carefully to ensure a successful and enjoyable building experience.

2. Safety Information

  • Recommended Age: Suitable for ages 14 years and older, including 18+.
  • Small Parts Warning: This product contains small parts and is not suitable for children under 3 years due to choking hazards.
  • California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • General Warning: No specific warnings beyond general safety for building blocks. Ensure all pieces are handled appropriately.

3. Package Contents

Upon opening your SEMBO BLOCK set, you should find the following:

  • Building blocks (approximately 1118 pieces for Model 106001, 1207 pieces for Model 106002).
  • Instruction manual (this document).
  • If purchased with a gift box, the blocks will be contained within an exquisite gift box.

4. Specifications

FeatureDescription
Brand NameSEMBO BLOCK
MaterialPlastic
Block SizeSmall building block (Compatible with Lego)
Is ElectricNo Battery
High-concerned chemicalNone
GenderUnisex
OriginMainland China
Model 106001 (Sun Wukong) Pieces1118 pcs
Model 106001 (Sun Wukong) DimensionsApprox. 32cm (H) x 21cm (W) x 20cm (D)
Model 106002 (Holy Spirit - Ne Zha) Pieces1207 pcs
Model 106002 (Holy Spirit - Ne Zha) DimensionsApprox. 33cm (H) x 22cm (W) x 20cm (D)

5. Assembly Instructions

Before you begin, organize your building blocks by color and shape to make the assembly process smoother. Refer to the included pictorial instructions for step-by-step guidance. The following sections highlight key features and assembly aspects for each model.

5.1. Model 106001: Sun Wukong Robot Mecha

This model features the legendary Monkey King, Sun Wukong, in a powerful robot form. Pay close attention to the assembly of the Golden Scale Holy Dragon Battle Robe and the intricate staff weapon.

SEMBO BLOCK Sun Wukong Robot Mecha Model 106001

Figure 5.1.1: Assembled Sun Wukong Robot Mecha (Model 106001).

Sun Wukong Mecha in dynamic action pose

Figure 5.1.2: Sun Wukong Mecha in a dynamic action pose, showcasing its articulation.

Sun Wukong Mecha side view with staff

Figure 5.1.3: Side view of the Sun Wukong Mecha, highlighting the detailed staff and armor.

Sun Wukong Mecha holding staff

Figure 5.1.4: Sun Wukong Mecha holding its iconic staff weapon.

Close-up of Sun Wukong's staff weapon

Figure 5.1.5: Detailed view of the Sun Wukong Mecha's staff weapon.

Gift box for Sun Wukong Model 106001

Figure 5.1.6: The exquisite gift box packaging for Model 106001.

Dimensions for Sun Wukong Model 106001

Figure 5.1.7: Dimensions for the assembled Sun Wukong Model 106001 (1118 pieces).

5.2. Model 106002: Holy Spirit - Ne Zha Robot Mecha

This model brings to life the deity Ne Zha in a powerful robot form, featuring unique elements like the Qian Kun Hoop, Wind Fire Wheels, and multiple arms that convert into thrusters.

SEMBO BLOCK Holy Spirit - Ne Zha Robot Mecha Model 106002

Figure 5.2.1: Assembled Holy Spirit - Ne Zha Robot Mecha (Model 106002).

Qian Kun Hoop with two postures

Figure 5.2.2: The Qian Kun Hoop accessory, capable of two distinct postures.

Components for Ne Zha model including hand, leg joint, and weapon part

Figure 5.2.3: Key components for the Ne Zha model, showing a hand, leg joint, and weapon part.

Joint reinforcement detail for Ne Zha model

Figure 5.2.4: Detail of joint reinforcement for enhanced stability and durability.

Ne Zha's four back arms converting to thrusters

Figure 5.2.5: The four arms on the back of the Ne Zha model can be converted into thrusters for dynamic poses.

Holy Spirit Ne Zha model with multiple arms and weapons

Figure 5.2.6: The Holy Spirit - Ne Zha model showcasing its multiple arms and weapons.

Movable joints detail for Ne Zha model

Figure 5.2.7: Close-up of the movable joints, allowing for flexible posing.

Qian Kun Hoop folding mode and back thrusters

Figure 5.2.8: Illustration of the Qian Kun Hoop's folding mode and the back thrusters.

Ne Zha model in three heads and six arms posture

Figure 5.2.9: The Ne Zha model configured in its renowned 'three heads and six arms' posture.

Close-up of Ne Zha's head and shoulder details

Figure 5.2.10: Detailed view of the Ne Zha model's head and shoulder armor.

Holy Spirit Ne Zha model with 1207 pieces

Figure 5.2.11: The Holy Spirit - Ne Zha model, composed of 1207 pieces.

New mech joint design for improved motion

Figure 5.2.12: Detail of the new mech joint design, featuring dual gears and pin joints for improved range of motion and firmness.

Purple Flame Snake Spear Fire Tip Gun weapon

Figure 5.2.13: The Purple Flame Snake Spear Fire Tip Gun weapon accessory.

Qian Kun Hoop taking on two forms

Figure 5.2.14: The Qian Kun Hoop can be configured into two distinct forms.

Front and side display of Holy Spirit Ne Zha model

Figure 5.2.15: Front and 45-degree side display of the Holy Spirit - Ne Zha model.

Flexible hand joints, Lotus Arm Guards, and fine face sculpting

Figure 5.2.16: Close-ups detailing flexible hand joints for firm grip, Lotus Arm Guards, and fine sculpting of the face.

Exquisite gift box for Holy Spirit Model 106002

Figure 5.2.17: The exquisite gift box packaging for Model 106002.

Back display of Holy Spirit Ne Zha model

Figure 5.2.18: Back display of the Holy Spirit - Ne Zha model, showing intricate rear details.

Over 40 movable joints on Ne Zha model

Figure 5.2.19: The model features over 40 movable joints for extensive posing options.

Dimensions for Holy Spirit Ne Zha Model 106002

Figure 5.2.20: Dimensions for the assembled Holy Spirit - Ne Zha Model 106002 (1207 pieces).

6. Operating Instructions

Once assembled, your robot mecha model is designed for display and posing. The models feature numerous movable joints, allowing for a wide range of dynamic postures.

  • Posing: Carefully articulate the joints in the arms, legs, and torso to achieve desired poses. The new mech joint design (Model 106002) offers improved range of motion.
  • Weapon Handling: The flexible hand joints allow for a firm grip on mythological weapons like the staff (Sun Wukong) or the Purple Flame Snake Spear Fire Tip Gun (Ne Zha).
  • Qian Kun Hoop (Model 106002): This accessory can be adjusted into two different postures or a folding mode.
  • Thrusters (Model 106002): The four arms on the back of the Ne Zha model can be converted into thrusters for aerial or dynamic action poses.

7. Maintenance

To keep your SEMBO BLOCK model in excellent condition:

  • Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters small crevices. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model away from direct sunlight and extreme temperatures to prevent discoloration or warping of the plastic. Keep it in a stable location to avoid accidental falls.
  • Handling: Handle the model with care, especially when adjusting poses, to prevent stress on the joints or detachment of pieces.

8. Troubleshooting

  • Missing Pieces: If you find any pieces missing upon opening the package, please contact the seller or manufacturer's support with your purchase details.
  • Loose Joints: If a joint feels loose, carefully re-examine the assembly steps for that section to ensure all pieces are correctly and firmly connected. Sometimes, a piece may not be fully pressed into place.
  • Difficulty Assembling: If you encounter difficulty with a particular step, double-check the pictorial instructions. Ensure you are using the correct pieces and applying appropriate, gentle pressure.

9. Warranty & Support

For any questions, concerns, or support regarding your SEMBO BLOCK Robot Mecha model, please contact the seller directly through your purchase platform. They will be able to assist you with product-specific inquiries and potential warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.