1. Introduction
Thank you for choosing the Dongcheng M1P-FF04-6 Stone Countertop Trimming Machine. This tool is designed for precision trimming, slotting, and jointing tasks on various stone countertops. To ensure safe and efficient operation, please read this manual thoroughly before use and keep it for future reference.

Figure 1: Dongcheng M1P-FF04-6 Trimming Machine
2. General Safety Instructions
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and dust masks. Ensure the tool is disconnected from the power source before making any adjustments or changing accessories.
3. Product Components
Familiarize yourself with the main parts of your trimming machine:

Figure 2: Structural Breakdown
- Heat Dissipation Port: Designed for quick heat dissipation to prevent motor overheating.
- Power Switch: A toggle switch for easy control of the machine's power.
- External Carbon Brush: Easily accessible for quick replacement without disassembling the machine.
- Anti-slip Design: Provides a comfortable and secure grip for extended operation.
- Scale Ruler: Allows for precise adjustment and control of the processing depth.
- Loosening Knob: Used to secure the transparent cover.
- Transparent Base: Enables clear observation of the cutting trajectory during operation.
- Chuck: A screw-type chuck for easy and secure cutter head replacement.
4. Specifications

Figure 3: Product Specifications Overview
| Feature | Specification |
|---|---|
| Brand | Dongcheng |
| Model | M1P-FF04-6 |
| Rated Input Power | 550W |
| Rated Speed | 30000 r/min |
| Cutter Diameter | Φ6.35mm |
| Net Weight | 1.8 kg |
| DIY Supplies | Electrical |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 22 cm x 22 cm x 11 cm |
| Package Weight | 2.5 kg |
5. Setup and Installation
Follow these steps to install the cutter head and base:

Figure 4: Installation Steps
- Step 1: Loosen the Chuck Nut. Press the machine's self-locking button and use the provided wrench to loosen the chuck nut.
- Step 2: Select and Insert Cutter Head. Choose the appropriate cutter head for your task. When inserting, ensure the small end of the chuck faces inward and the large end faces outward.
- Step 3: Secure Cutter Head. After inserting the cutter head, make sure it is fully seated in place. Then, firmly tighten the chuck nut with the wrench.
- Step 4: Attach the Base. Align and attach the transparent base to the machine. Ensure it is securely fastened.
6. Operation
6.1 Power On/Off

Figure 5: Toggle Switch and Heat Dissipation Port
The machine is equipped with a toggle power switch. To turn on, simply flip the switch to the 'ON' position. To turn off, flip it to the 'OFF' position. Always ensure the switch is in the 'OFF' position before plugging or unplugging the tool.
6.2 Adjusting Cutting Depth

Figure 6: Depth Adjustment Scale
Use the scale ruler on the machine body to precisely adjust the cutting depth. Loosen the loosening knob, set the desired depth, and then tighten the knob to secure the setting. The transparent base allows you to clearly observe the processing trajectory and ensure accuracy.
6.3 Using the Adjustable Tilt Base (Optional)

Figure 7: Adjustable Tilt Base
For angled cuts, the machine supports an adjustable tilt base (if included with your model). The tilt angle can be adjusted within a range of -30° to 45°. Refer to the specific instructions provided with the tilt base accessory for detailed adjustment procedures.
6.4 General Operation Tips
- Always ensure the workpiece is securely clamped before beginning any operation.
- Start the machine before making contact with the workpiece.
- Move the machine smoothly and consistently across the workpiece. Avoid forcing the tool.
- Allow the machine to reach full speed before starting a cut.
- The anti-slip design ensures a comfortable grip for prolonged use.
7. Maintenance
7.1 Carbon Brush Replacement

Figure 8: External Carbon Brush Access
The machine features external carbon brushes for convenient replacement. When the carbon brushes wear out, they can be easily accessed and replaced without disassembling the main body of the machine. Ensure you use genuine replacement parts.
7.2 Cleaning and Storage
- Regularly clean the heat dissipation ports to ensure proper airflow and prevent overheating.
- Wipe down the machine body and transparent base after each use to remove dust and debris.
- Store the machine in a dry, clean, and secure location, out of reach of children.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power supply; Faulty power switch; Worn carbon brushes | Check power connection; Inspect/replace power switch; Replace carbon brushes. |
| Excessive vibration during operation | Loose cutter head; Damaged cutter head; Unbalanced workpiece | Tighten chuck nut; Replace cutter head; Secure workpiece properly. |
| Motor overheating | Blocked heat dissipation ports; Overloading the machine | Clean heat dissipation ports; Reduce load, allow machine to cool. |
| Poor cutting quality | Dull or incorrect cutter head; Incorrect depth setting; Too fast feed rate | Replace cutter head; Adjust depth setting; Reduce feed rate. |
9. User Tips
- For optimal performance and longevity, ensure the machine's motor is not continuously overloaded. The all-copper high-power motor is designed for strong output and anti-overload capabilities, but prolonged excessive strain can reduce its lifespan.
- Regularly check the transparent base for any damage or excessive wear, as a clear view of the processing trajectory is crucial for precision.
- When working with different materials, experiment with scrap pieces first to find the ideal cutting depth and feed rate.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.
11. Product Video Overview
Video: A brief overview of the Dongcheng M1P-FF04-6 Trimming Machine's features and operation.