1. Introduction
The Lefant M213S Smart Robot Vacuum Cleaner and Mopper is designed to provide an efficient and convenient solution for maintaining clean floors, freeing you from tedious housework. This device combines powerful vacuuming with mopping capabilities, intelligent navigation, and smart control options to ensure a thorough cleaning experience.
2. Important Safety Instructions
Before using your Lefant M213S, please read all safety instructions carefully and keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This appliance is for household use only.
- Do not use the robot in environments with open flames or explosive materials.
- Keep the robot away from water and moisture.
- Ensure the charging dock is placed on a level surface against a wall, with clear space around it.
- Do not allow children or pets to play with the robot.
- Always supervise the robot when it is operating near stairs or elevated surfaces.
- Turn off the robot and unplug the charging dock before cleaning or performing maintenance.
- Use only the original power adapter and charging dock provided with the robot.
3. Package Contents
Verify that all components are present in the package:
- Lefant M213S Robot Vacuum Cleaner
- Charging Station
- Waterproof Pad
- Mop Pad
- Disposable Cleaning Cloths
- HEPA Dust Cut Filter
- 500ml Dust Box
- Side Brushes (set)
- AC Adapter
4. Setup Guide
4.1. Charging Station Placement
Place the charging station on a hard, level surface against a wall. Ensure there is at least 1 meter (3 feet) of clear space on both sides and 2 meters (6 feet) in front of the charging station for the robot to easily dock.
4.2. Initial Charging
Before first use, fully charge the robot. Place the robot onto the charging station, ensuring the charging contacts align. The indicator light on the robot will show charging status. A full charge typically takes 4-5 hours.
4.3. Installing Side Brushes
Snap the side brushes onto the posts located on the bottom of the robot until they click into place.
4.4. Connecting to the Lefant Life App
The Lefant M213S can be controlled via the Lefant Life App (available for iOS and Android). Follow these steps to connect:
- Download the 'Lefant Life' app from your app store.
- Register or log in to your account.
- Ensure your robot is charged and your phone is connected to a 2.4GHz Wi-Fi network.
- In the app, select 'Add Device' and follow the on-screen instructions to connect your M213S.
5. Operation
5.1. Starting/Pausing Cleaning
- Manual Start: Press the power button on the robot once to start cleaning. Press again to pause.
- App Control: Use the Lefant Life App to start, pause, or stop cleaning.
- Voice Control: Use Amazon Alexa or Google Assistant commands (e.g., "Alexa, turn on M213S").
5.2. Cleaning Modes
The M213S offers multiple cleaning modes to suit different needs:
- Automatic Cleaning: The robot intelligently navigates to clean the entire floor area.
- Zigzag Cleaning: The robot cleans in a systematic back-and-forth pattern, ensuring comprehensive coverage.
- Edge Cleaning: The robot focuses on cleaning along walls and furniture edges.
- Spot Cleaning: The robot cleans a specific area more intensely, ideal for concentrated dirt.
- Random Cleaning: The robot cleans in a random pattern, suitable for open spaces.
5.3. Mopping Function
The M213S supports mopping using disposable wet wipes. Attach a disposable wet wipe to the designated area on the robot's underside. The robot will then sweep, vacuum, and mop simultaneously. After use, simply remove and discard the wet wipe.
5.4. Obstacle Avoidance and Anti-Drop
Equipped with 6D sensors, the M213S intelligently detects obstacles and avoids collisions with furniture. It also features anti-drop technology to prevent falls from stairs or elevated surfaces.
5.5. Automatic Recharging
When the battery level is low, the M213S will automatically return to its charging station to recharge, ensuring it's always ready for the next cleaning cycle.
6. Maintenance
Regular maintenance ensures optimal performance of your robot vacuum.
6.1. Emptying the Dust Box
The 500ml dust box should be emptied after each cleaning cycle or when full. Press the release button to remove the dust box, open it, and discard the contents. Rinse the dust box with water if necessary and allow it to air dry completely before reinserting.
6.2. Cleaning the HEPA Filter
The HEPA filter should be cleaned regularly (e.g., weekly) by tapping it gently to remove dust. Replace the HEPA filter every 3-6 months, depending on usage.
6.3. Cleaning Side Brushes
Inspect the side brushes regularly for tangled hair or debris. Use a cleaning tool or scissors to remove any obstructions. Replace worn-out side brushes to maintain effective cleaning.
6.4. Cleaning the Brushless Suction Port
The M213S features a unique brushless suction port design, which significantly reduces hair tangling issues, especially beneficial for pet owners. Periodically check the suction port for any blockages and clear them as needed.
6.5. Cleaning Sensors and Charging Contacts
Wipe the anti-drop sensors, anti-collision sensors, and charging contacts on both the robot and the charging station with a clean, dry cloth to ensure proper function.
7. Troubleshooting
If you encounter issues with your Lefant M213S, refer to the following common problems and solutions:
- Robot does not turn on: Ensure the battery is charged. Check if the power button is pressed correctly.
- Robot does not charge: Verify the charging contacts on both the robot and the charging station are clean and aligned. Ensure the charging station is plugged in.
- Robot gets stuck frequently: Clear obstacles from the cleaning path. Ensure the robot is not operating in areas with excessive cables or loose rugs.
- Cleaning performance is poor: Empty the dust box and clean the HEPA filter. Check and clean the side brushes. Ensure the suction port is not blocked.
- Robot cannot connect to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. Restart your router and the robot. Re-attempt the connection process in the Lefant Life App.
- Voice control not working: Ensure the robot is properly linked to your Alexa or Google Home account in the Lefant Life App. Check your internet connection.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lefant |
| Model Name | Lefant M213S |
| Function | Mopping & Sweeping & Suction Type |
| Power (W) | 11-20W |
| Voltage | 19 V |
| Battery Type | Li-ion |
| Battery Capacity | 2600mAh |
| Battery Life / Run Time | 150 Minutes (2 hours - 2 hours and 30 minutes) |
| Dust Box Capacity | 0.5 L (500ml) |
| Dust Storage Type | Dust Box/Dust Bucket |
| Filter Type | HEPA |
| Max. Suction | 3200Pa |
| Cleaning Coverage | 150 ㎡ Per Charge |
| Number of Operating Modes | 3-4 |
| Installation | Robot |
| Timing Reservation | Yes |
| Remote Control | No |
| Bag Or Bagless | Bagless |
| Obstacle Avoidance | Smart Anti-drop & Anti-collision |
| Mapping | Multi-layer Smart Zoning Map |
| APP/Voice Control | Yes, Also Support Alexa/Google Home Control |
| Connection | WiFi (2.4G Only)/Bluetooth |
| Side Brush | Anti-tangle Side Brush |
| Weight | 3 - 6 KG |
| Certification | CB, CE |
| Origin | Mainland China |
9. User Tips
- Language Settings: If you need to change the language of the app or voice prompts, check the settings menu within the Lefant Life App.
- Optimal Cleaning: For best results, clear small obstacles and loose cables from the floor before starting a cleaning cycle.
- Pet Hair: The brushless suction port is highly effective for pet hair, minimizing tangles. Regular emptying of the dustbin is still recommended for homes with multiple pets.
- Battery Longevity: To prolong battery life, ensure the robot is fully charged before long periods of inactivity.
10. Warranty and Support
For warranty information, technical support, or any questions regarding your Lefant M213S Robot Vacuum Cleaner and Mopper, please contact the Lefant Overseas Official Store customer service. Keep your purchase receipt as proof of purchase.
