HOMEFISH LZD-Q5

Contents

HOMEFISH Electric Liquid Foam Dispenser Gun User Manual

Model: LZD-Q5

1. Introduction

The HOMEFISH Electric Liquid Foam Dispenser Gun (Model LZD-Q5) is a versatile and automatic foaming device designed for various cleaning and personal hygiene applications. It features a large liquid capacity, long battery endurance, and an IPX5 waterproof rating, making it suitable for use in bathrooms, kitchens, and for tasks such as pet cleaning, car washing, and toy cleaning.

Multifunctional Foam Machine with large capacity, strong endurance, and replaceable liquid
Figure 1: HOMEFISH Electric Liquid Foam Dispenser Gun - Multifunctional Foam Machine.
Icons representing features: Recycling, More capacity, Waterproof, Endurance, Easy to carry, Comfortable
Figure 2: Key features including recycling, large capacity, waterproofing, endurance, portability, and comfort.
Examples of wide applicability: Children's Bathing, Pet cleaning, Kitchen, Bathroom, Clean the floor, Cleaning toys, Car Wash, Washing toilets
Figure 3: Wide applicability for various daily use scenarios.

2. Package Contents

Please check the package for the following items:

  • Electric foaming gun x 1
  • USB Type-C charging cable x 1
  • User manual x 1
  • Female buckle x 1 (for wall mounting)
  • Nozzle x 2 (short and long range)

3. Specifications

FeatureDetail
Product NameElectric soap spray gun / Electric Bubble Sprayer
Model NumberLZD-Q5
MaterialABS + Silica gel + PP
Dimensions (L x W x H)8.5 x 11.7 x 21.5 cm
Net Weight200g
Rated Voltage3.7V
Charging Voltage5V
Rated Power2.5W
Liquid Capacity350ml
Endurance TimeUp to 90 days (standby)
Battery TypeLithium battery (3.7V/1200mAh 18650)
Charging InterfaceUSB Type-C
Waterproof RatingIPX5
Placement ModeDesktop or Wall-mounted
Product dimensions: 21.5cm height, 11.7cm nozzle length, 8.5cm base width
Figure 4: Product dimensions.
Product parameter table showing name, model, material, dimensions, net weight, voltages, power, capacity, endurance, battery type, and placement mode.
Figure 5: Detailed product parameters.
Product details showing nozzle type outlet, key switch, Type-C charging port, pendable design, and large capacity liquid container.
Figure 6: Detailed view of product features including nozzle, switch, charging port, and design.

4. Setup Guide

4.1 Initial Charging

Before first use, ensure the device is fully charged. Connect the USB Type-C charging cable to the device and a compatible 5V power source. The charging indicator light will be red while charging and will turn off when fully charged. Avoid using fast-charging adapters.

Type-C charging port and indicator light showing red for charging and off for full charge
Figure 7: Type-C charging port and charging indicator.

4.2 Liquid Filling

Unscrew the bottle from the main unit. Pour your desired foaming liquid into the bottle. Ensure the liquid level does not exceed the maximum fill line. Screw the bottle back onto the main unit securely.

Large capacity 350ml liquid soap bottle being filled
Figure 8: Liquid filling into the 350ml capacity bottle.

4.3 Nozzle Attachment

The foam gun comes with two types of nozzles: a short-range nozzle (Tender mode) and a long-range nozzle (Force mode). Choose the appropriate nozzle for your task and attach it firmly to the dispenser gun.

Two nozzle options: Force model for long range and Tender mode for short range
Figure 9: Nozzle options for different foaming ranges.

4.4 Wall Mount Installation (Optional)

To install the device on a wall:

  1. Wipe down the wall surface where you intend to mount the dispenser. Ensure it is clean and dry.
  2. Glue the strong adhesive hook (female buckle) to the cleaned wall surface. Press firmly and wait for it to set.
  3. Align the dispenser gun with the hook.
  4. Put the product on the hook, ensuring it hangs firmly and securely.
Four-step procedure for installing a wall mount: 1. Wipe down walls, 2. Glue hook to wall, 3. Put product on hook, 4. Product hangs firmly
Figure 10: Wall mount installation procedure.

5. Operating Instructions

5.1 Power On/Off and Foaming

Once the liquid is filled and the nozzle is attached, press and hold the power button to dispense foam. Release the button to stop the foaming action. The device generates foam quickly, in approximately 0.25 seconds.

Hand holding the foam gun, demonstrating 0.25 seconds fast foam generation
Figure 11: Fast foam generation in 0.25 seconds.

5.2 Usage Scope

This electric foam dispenser is suitable for a wide range of applications, including:

  • Kitchen and bathroom cleaning (sinks, glass mirrors)
  • Personal hygiene (shampoo, face wash, body wash)
  • Pet cleaning
  • Car washing and bicycle cleaning
  • Cleaning toys
  • General floor and toilet cleaning

6. Maintenance

6.1 Cleaning the Device

The device has an IPX5 waterproof rating, meaning it is resistant to water splashes. However, do not rinse the entire body of the device directly with water or immerse it, as this may cause damage. Wipe the exterior with a damp cloth. Do not disassemble the external filter for cleaning.

Foam gun being used in a wet environment, highlighting IPX5 waterproof design
Figure 12: IPX5 waterproof design allows safe use in wet environments.

6.2 Liquid Dilution Ratios

Proper dilution of liquids is crucial for optimal foam generation and to prevent clogging. Refer to the following guidelines:

  • Foam-type liquid: Can be used directly without dilution.
  • Ordinary gel-type liquid: Dilute at a ratio of 1 part liquid to 4 parts water.
  • Latex thick-type liquid: Dilute at a ratio of 1 part liquid to 8 parts water.

If you are unsure about the specific type of liquid or its appropriate dilution ratio, please contact the seller for guidance.

Image showing various cleaning fluids like hand sanitizer, gel, shampoo, body wash, laundry detergent, dish soap, with dilution ratios for ordinary gel (1:4) and latex thickened form (1:8)
Figure 13: Dilution guidelines for various cleaning fluids.

6.3 Storage

Store the device upright to prevent liquid from flowing out of the air inlet. Avoid placing the machine in damp, high-humidity, or high-temperature environments. The normal operating temperature range is 3°C to 55°C.

7. Troubleshooting

ProblemPossible CauseSolution
No foam dispensed / Weak foamLow battery; Insufficient liquid; Incorrect liquid dilution; Clogged nozzle.Charge the device fully; Refill liquid; Adjust dilution ratio; Clean the nozzle.
Device not turning onLow battery; Device malfunction.Charge the device; If problem persists, contact support.
Charging indicator not lighting upCharging cable not properly connected; Faulty cable/adapter.Ensure secure connection; Try a different USB Type-C cable and 5V adapter.
Liquid leaking from air inletDevice not stored upright.Always store the device in an upright position.

8. User Tips

  • For best results, always ensure the liquid is properly diluted according to the guidelines provided in Section 6.2.
  • Regularly check the battery level to avoid interruptions during use. The device offers a long endurance time of up to 90 days on standby, but active use will reduce this.
  • Utilize the two different nozzles (short and long range) to optimize foam application for various tasks.
  • Keep the charging port dry to prevent damage, especially given its IPX5 waterproof rating which protects against splashes but not immersion.

9. Warranty and Support

This product is covered by standard warranty terms. The warranty does not cover:

  • Unauthorized repairs, misuse, collision, negligence, abuse, liquid injection, modification, incorrect use of non-product accessories, or tampering with labels/anti-counterfeiting marks.
  • Water ingress or internal pipeline blockage.
  • Damage caused by force majeure.
  • Failures not listed in the "Product Performance Fault Table" or due to human factors.

For further assistance, technical support, or inquiries regarding liquid dilution, please contact the seller or manufacturer.

A PDF version of this user manual may be available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.