A-BF KPS Series (KPS3005D, KPS6003D, KPS3010D, KPS6005D, KPS6010D)

Contents

A-BF KPS Series High-Precision Adjustable DC Regulated Switching Power Supply User Manual

Models: KPS3005D, KPS6003D, KPS3010D, KPS6005D, KPS6010D

1. Introduction

The A-BF KPS Series is a range of high-power, high-precision adjustable DC regulated switching power supplies designed for constant voltage and constant current operation. These power supplies feature a four-bit encoder for precise control and a digital display for clear readings. They are suitable for various applications requiring stable and reliable power output.

Multiple A-BF KPS series power supplies
Figure 1: Overview of A-BF KPS Series Adjustable DC Power Supplies.

2. Safety Information

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure the power supply is connected to a grounded outlet.
  • Do not operate in wet or damp conditions.
  • Do not open the casing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
  • Verify input voltage compatibility before connecting the power cord.
  • Always turn off the power supply and disconnect it from the main power source before making any connections or adjustments to the output terminals.
  • Avoid short-circuiting the output terminals for extended periods.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

  • Power Supply Host (KPS Series unit)
  • Instruction Manual
  • Certificate
  • Warranty Card
  • Power Cord (appropriate for your region)
Various power cord types: British, US, European
Figure 2: Included Power Cord Types (British, US, European).

4. Specifications

The A-BF KPS Series offers various models with different power outputs. Below are the detailed specifications for each model:

Table 1: KPS Series Technical Parameters
ModelProduct PowerVoltage OutputCurrent OutputSize (L x H x D)
KPS3005D150W0~30V0~5A300 x 88 x 180 mm
KPS6003D180W0~60V0~3A300 x 88 x 180 mm
KPS3010D300W0~30V0~10A300 x 88 x 180 mm
KPS6005D300W0~60V0~5A300 x 88 x 180 mm
KPS6010D600W0~60V0~10A300 x 88 x 180 mm

General Technical Parameters:

  • Power effect: Voltage: ≤ 0.1% + 3mV, Current: ≤ 0.03% + 3mA
  • Load effect: Voltage: ≤ 0.03% + 0.05V, Current: ≤ 0.05% + 0.003A
  • Ripple noise: Voltage: ≤ 0.05Vrms, Current: ≤ 0.01Arms
  • Power Input: AC 220V ±10% 50Hz (100V input 220V manual switching)
  • Weight: Approximately 2kg - 2.5kg (bare metal weight)
KPS3010D model specifications
Figure 3: KPS3010D Model Specifications (300W, 30V, 10A).
KPS6010D model specifications
Figure 4: KPS6010D Model Specifications (600W, 60V, 10A).

5. Product Features

The KPS Series power supplies are designed with advanced features for optimal performance and user convenience:

  • Four-bit Encoder CNC Power Supply: Provides high precision and stable output.
  • Digital Display: Clear and accurate display of voltage, current, and power.
  • Data Storage Function: Multiple groups of data (voltage, current, power) can be stored and recalled, making it convenient for repetitive tasks.
  • Intelligent Temperature Control Fan: Ensures low noise operation and stable output by effectively dissipating heat.
  • RS232/485 Communication Connection: Supports standard communication protocols for remote control and monitoring.
  • Uninterrupted Use: Designed for up to 24 hours of continuous operation.
  • Exquisite Craftsmanship: Durable shell and robust inner core for long-lasting performance.
Detailed view of KPS series features including controls, display, cooling fan, and communication ports
Figure 5: KPS Series Front and Rear Panel Features.
Data storage and recall function illustration
Figure 6: Data Storage and Recall Function.
Intelligent temperature control fan and RS232/485 communication ports
Figure 7: Intelligent Cooling and Communication Interface.
Applications, 24-hour use, and internal construction details
Figure 8: Wide Application and Durability Features.

6. Setup Instructions

  1. Unpacking: Carefully remove the power supply from its packaging and inspect for any damage. Retain the packaging for future transport or storage.
  2. Placement: Place the unit on a stable, level surface with adequate ventilation. Ensure the cooling fan at the rear is not obstructed.
  3. Power Connection: Connect the provided power cord to the AC input socket on the rear panel of the power supply and then to a suitable grounded AC power outlet.
  4. Output Connections: Connect your load to the output terminals (red for positive, black for negative) on the front panel using appropriate test leads. Ensure connections are secure before powering on.
Rear view of A-BF KPS series power supply showing cooling fan and power input
Figure 9: Rear Panel with Cooling Fan and Power Input.
Front view of A-BF KPS series power supply showing output terminals
Figure 10: Front Panel with Output Terminals.

7. Operating Instructions

The KPS Series power supply offers intuitive controls for setting voltage and current.

  1. Power On: Press the POWER switch on the front panel to turn on the unit. The digital display will illuminate.
  2. Setting Voltage:
    • Press the 'V' button (Voltage) to select voltage adjustment mode.
    • Use the rotary encoder knob to adjust the desired voltage value. Turn clockwise to increase, counter-clockwise to decrease.
    • The four-bit encoder allows for fine adjustments.
  3. Setting Current:
    • Press the 'A' button (Current) to select current adjustment mode.
    • Use the rotary encoder knob to adjust the desired current limit.
    • The unit operates in constant voltage (CV) or constant current (CC) mode depending on the load.
  4. Output ON/OFF: Use the 'ON/OFF' button to enable or disable the output to your load. Always disable output before connecting or disconnecting loads.
  5. Data Storage (Memory): The unit supports storing and recalling multiple sets of voltage and current parameters. Refer to the detailed instructions in the included manual for specific steps on using the 'Save' and 'Recall' functions (often labeled M1, M2, M3, M4 or A, B, C, D).
  6. Communication Interface (Optional): If your model includes RS232/485 ports, connect to a computer for remote control and data logging using compatible software (not included).
Video 1: Product demonstration showing voltage test, power test, current accuracy test, and ripple test.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power supply. Do not use abrasive cleaners or solvents.
  • Ventilation: Regularly check that the cooling fan and vents are free from dust and obstructions to ensure proper airflow.
  • Fuse Replacement: If the unit fails to power on, check the fuse located near the AC input socket on the rear panel. Replace with a fuse of the same type and rating only. Refer to the product label for fuse specifications.
  • Storage: When not in use for extended periods, store the power supply in a dry, dust-free environment.

9. Troubleshooting

  • No Power: Check the power cord connection, the power switch, and the fuse. Ensure the AC outlet is functional.
  • No Output Voltage/Current: Ensure the output is enabled (ON/OFF button). Check your load connections for shorts or open circuits. Verify that the voltage and current limits are set appropriately for your application.
  • Unstable Output: Check for loose connections. Ensure the load is within the power supply's specifications. Excessive ripple might indicate an issue with the load or the power supply itself; refer to the ripple test in the product video for expected performance.
  • Overload/Over-temperature Protection: If the unit shuts down, it might be due to an overload or overheating. Reduce the load or allow the unit to cool down. Check for proper ventilation.

10. User Tips

  • For sensitive electronics, always start with a low voltage and gradually increase it to the desired level.
  • When working with unknown loads, set the current limit to a safe, low value first to prevent damage.
  • Utilize the memory presets (A, B, C, D) for frequently used voltage and current settings to save time.
  • Keep the display clean for optimal readability of voltage, current, and power values.

11. Warranty and Support

A-BF products are manufactured to high-quality standards. For warranty information, please refer to the included Warranty Card. If you encounter any issues or require technical assistance, please contact the manufacturer or your authorized dealer for support.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.