1. Introduction
Thank you for purchasing the AZDOME M550 Max Dash Cam. This manual provides detailed instructions on how to operate your dash cam. Please read it thoroughly before use to ensure correct installation and operation. Product specifications and features are subject to change without prior notice for performance improvements.
Important Notes:
- A 64GB microSD card is included with your dashcam. Please format it with your dash cam before first use.
- The dash cam requires constant power when in use. It features a built-in Super Capacitor (not a battery) which only holds enough charge to memorize time settings.
- For optimal performance, use only the provided AZDOME car charger and AZDOME SD cards. Unqualified SD cards may cause random reboots or performance issues.
For a digital version of this manual, you can scan the QR code below or visit this PDF link.
Scan to download the User Manual (PDF)
2. Setup
2.1. In The Box
Verify that all the following items are included in your package:
- Front and Cabin Camera (x1)
- Rear Camera (6M/20ft) (x1)
- Electrostatic Films for Front Camera (x2)
- Car Charger (x1)
- Type-C USB Power Cable (3.5M/12ft) (x1)
- Storage Card (64GB) (x1)
- Cable Clips (x5)
- Pry Tool (x1)
- User Manual (x1)

AZDOME M550 Max Dash Cam with included 2.5K Rear Camera
2.2. Product Diagram

Product Diagram with labeled components
- Screen
- Cabin camera
- Power button
- UP button
- OK button
- Down button
- Mode button
- MIC
- Reset button
- Speaker
- Type-C USB charging port
- Rear camera connection port
- microSD card slot
- Rear camera
- Mounting bracket
2.3. Installation
Install the front and cabin camera at the top of the front windshield. Ensure the windshield is clean and dry before applying the electrostatic film.
- Connect the magnetic bracket to the M550 Max dash cam. Plug in the cabin camera.
- Insert the microSD card into the dash cam's slot and format it for first-time use.
- Stick the electrostatic film on your windshield, then attach the magnetic bracket on top of the film.
- Turn off the car engine.
- Connect the charging cable to the Type-C USB port of the magnetic bracket. Use the pry tool to tuck the power cord along the windshield trim.
- Adjust the front camera lens angle slightly downwards (approx. 10° below horizontal) for a 6:4 road to background ratio.
- Turn on the engine. The dashcam will power up and start recording automatically.

Easy & Hidden Installation for front and rear cameras
Rear Camera Installation (IP68 waterproof)
The rear camera can be installed inside or outside your car. Here are general steps:
- Plug the rear camera cable into the Mini USB input socket of the front camera.
- Select a flat and central place near the number plate lamp at the rear of the vehicle to mount the camera.
- Attach tape to the camera bracket to hold it in position. Drill two small holes: one for the first screw, and the second to run the reverse camera cable through.
- Insert the camera wire through the drilled hole.
- Fix the screws and securely tighten them.
- Adjust the lens position to ensure it is level with the ground.

4K+1080P+2.5K Recording with Front, Cabin, and Rear Cameras
Note:
- If installing the rear camera on the rear window, a specific Rear Window Bracket for M550 Max (not included) may be required. Search for it on Amazon.
- The original rear camera cable is 6m/20ft. If a longer cable is needed, a 20ft 6 Pin rear camera Extension Cable for M550 Max (not included) can be purchased.
2.4. First Time Use
Upon first power-on, after a firmware update, or after a factory reset, the dash cam will guide you through initial setup:
- Language: Select your preferred language.
- Time Zone: Adjust the time zone according to your location. This setting influences the displayed time and date upon receiving a GPS connection.
- Date & Time: Set the current date and time. These settings will be overwritten once a GPS connection is established.
3. Operating Instructions
3.1. Buttons and Functions
| Key | Function |
|---|---|
| Power Button | Press once to turn ON. Long press (2 seconds) to turn OFF. Press once to turn ON/OFF LCD screen while recording. |
| UP Button | Press once to turn ON/OFF audio recording. Long press (2 seconds) to lock current loop cycle video file. |
| OK Button | Press once to Start/Stop video recording. Press once to Play/Pause video in Play Mode. Press once to Enter/Confirm settings in Menu. |
| Down Button | Press once to shift camera display mode. Long press (2 seconds) to turn ON WiFi. |
| M Button | Press once to enter/exit menu settings. Long press (2 seconds) to take a snapshot. |
3.2. Power ON/OFF
Auto Power ON/OFF:
- Plug the car charger into the cigarette lighter socket.
- When the car engine is on, the dash cam will turn ON and start recording automatically.
- When the car key is turned to the LOCK position, the dash cam will automatically save the recording and turn OFF.
Manual Power ON/OFF:
- To turn ON, press the power button once.
- To turn OFF, press and hold the power button for at least 2 seconds.
3.3. Menu Settings
Press the 'M' button to access the Menu settings. Navigate using the UP/DOWN buttons and confirm with OK.
Video Settings:
- Resolution: Choose video resolution (e.g., Front+Cabin+Rear: 4K 2160P 25fps+1080P 25fps+2K 1440P 30fps (Default)).
- Loop Recording: Set video clip length (1/3/5 minutes). The dash cam continuously records, overwriting the oldest files when the card is full.
- Rear Cam Mirror: ON (Default)/OFF. Displays a mirror image for the rear camera.
- Timelapse Record: OFF (Default)/ON. Records at 1 frame per second for condensed playback. Not recommended for evidence collection.
- Record Audio: ON (Default)/OFF. Controls microphone recording.
- WDR (Wide Dynamic Range): ON (Default)/OFF. Enhances video quality in high-contrast lighting.
- Frequency: 50HZ/60HZ (Default). Set according to your country's power supply (60HZ for USA/North America, 50HZ for Europe/Asia).
- G-Sensor: OFF/High/Middle (Default)/Low. Detects impacts to lock video files as emergency.
- Exposure: Adjust video brightness (+2.0 to -2.0).
Micro SD Card Settings:
- Storage Format Remind: Set a reminder to format the SD card.
- SD Card Format: Formats the SD card, optimizing its file system for the camera. Recommended every 1-2 months.
- Storage Info: View memory card information.
System Settings:
- Fatigue Driving Reminder: OFF (Default)/1hour/2hours/4hours. Alerts you after set driving duration.
- Speed Unit: KM/H/MPH (Default). Choose your preferred speed unit.
- Volume: Low (Default)/Medium/High. Adjust internal speaker volume.
- Beep Sound: ON (Default)/OFF. Controls key tone.
- Screen Saver: Live Video Always ON (Default)/Screen OFF After 1 Min/Screen OFF After 3 Min/Stealth Mode Startup. Configures screen behavior.
- IR LED: Auto (Default)/Night Mode/Day Mode. Controls IR lights for the cabin camera.
- Default Setting: Restores all settings to factory defaults without affecting recordings.
- GPS Info: Check satellite number, longitude, latitude, and speed.
- Version: Displays current firmware version.
3.4. Parking Mode (24/7 Protection)
The M550 Max offers 3 parking modes for 24/7 protection. These modes require a 3-lead hardwire kit (e.g., JYX05 or OBD01, sold separately) with an output current of 2.5A to function correctly.

24 Hours Parking Mode: Collision Detection, Motion Detection, Time-Lapse
Collision Detection Parking Mode:
- When the car engine is off, the camera stops continuous recording and enters impact detection mode.
- If an impact is detected (reaching the set G-Sensor level), the camera records a 1-minute continuous video, saves it to the EMR folder, and then turns off.
- Upon starting the car, the camera automatically returns to normal video mode.
Time-Lapse Parking Mode:
- When the car engine is off, the camera stops continuous recording and enters 1fps timelapse recording mode.
- If an impact is detected, the current timelapse video clip is locked and saved to the EMR folder. The camera then resumes 1fps recording.
- Upon starting the car, the camera automatically stops timelapse parking mode and returns to normal video mode.

Time Lapse Recording: 1 picture per second, showing recording duration for 512GB SD card
Motion Detection Parking Mode:
- When the car engine is off, the camera stops continuous recording and enters motion detection mode. The camera stays ON but the LCD screen turns off after 15 seconds.
- The camera records video only when motion is detected by the front lens.
- If an impact is detected, the camera stops motion detection, records a 1-minute continuous video, saves it to the EMR folder, and then returns to motion detection mode.
- Upon starting the car, the camera automatically stops motion detection parking mode and returns to normal video mode.
3.5. Playing Video Files
On the Dash Cam:
From the Menu, select 'Playback Mode' to view recorded videos and photos. Long press the 'M' button in the thumbnail playback interface to delete or protect files.
Using Your Smartphone (AZDOME App):
- Download the AZDOME app from Google Play Store or Apple App Store.
- Turn on WiFi on the dash cam by long pressing the Down button for 2 seconds.
- Connect your phone to the dash cam's WiFi network (SSID: M550 Max_*****, Default Password: 12345678). Ignore 'No Internet Connection' message.
- Open the AZDOME app. Register or skip login. Click 'Add Dashcam' and then 'Screen Dashcam'.
- Once connected, you can access 'Live Video Preview' and 'Dashcam Albums' to view, download, and share files.

Built-in WiFi with AZDOME App for Live View, GPS Tracking, Download, Share, Settings
Using Your Computer (AZDOME GPS Player):
- Remove the microSD card from the dash cam.
- Insert the card into a microSD card reader and connect it to your computer.
- Download and install the AZDOME GPS Player from www.azdomevip.com/support/downloads.
- Open the player, click 'Open Files' to select the 'Movie' or 'EMR' folder from your microSD card, or drag video files directly into the player.
- The player will display video, GPS information, and driving route on a map.

GPS Tracking with AZDOME App and GPS Player
4. Maintenance
4.1. MicroSD Card Management
- Formatting: Regularly format your microSD card (every 1-2 months) to ensure optimal performance and prevent issues with loop recording.
- Capacity: The dash cam supports up to 512GB microSD cards (Class 10, U3 Speed).

Loop Recording: Recording times for various SD card capacities
4.2. Firmware Update
Firmware updates introduce new features and improve performance. Follow these steps to update your dash cam's firmware:
- Remove the microSD card from the dash cam and connect it to your computer using a card reader.
- Download the latest M550 Max firmware (a .zip file) from www.azdomevip.com/support/downloads.
- Unzip the downloaded file and copy all '*.bin' firmware files to the root directory of your microSD card.
- Connect the camera to the car charger. Press the POWER button to start the update. The red LED will blink, indicating the update is in progress.
- The screen will remain blank during the update, which can take 1-2 minutes. Do not disconnect power.
- Once updated, the camera will turn ON automatically. Verify the new firmware version in the camera's menu.
- Format the SD card after the update to prevent re-updating on the next power cycle.
5. Troubleshooting (FAQ)
- Q1: Camera turns ON/OFF automatically?
A: Ensure the output current reaches 5V/2.5A and use the provided car charger. Verify that the cabin and rear cameras are connected correctly. The dash cam reboots if different cameras are detected for stability. - Q2: Video Image is blurred?
A: Remove the protective lens film, clean the lens, and ensure the windshield is clean and free of grease, dirt, and debris. - Q3: Camera gets HOT?
A: It is normal for the camera to run slightly warm due to high-speed video recording (up to 158°F/70°C). - Q4: No power to my Dash Cam but it works on my computer?
A: The cigarette power cable might be faulty. Inspect the fuse in the Car Power Cable plug. If blown, check the power cable for damage. - Q5: The sound is not synchronized with video during playback?
A: Your PC's codecs might be incompatible. Download the latest AZDOME GPS Player from www.azdomevip.com/support/downloads. - Q6: Video Files cannot be played on my computer?
A: MP4 video files may require suitable playback software on your PC. - Q7: Video has no sound?
A: Ensure 'Record Audio' is ON in settings. Pressing the UP button during recording mutes the microphone. Ensure 'Timelapse Record' is OFF. - Q8: Photograph is blurred?
A: The dash cam has a minimum focal range of about 2 meters. Objects closer than this may appear blurred. Long press the 'M' button for 2 seconds to take a snap. - Q9: I cannot delete files on my Dash Cam?
A: Check if the files are 'locked'. In the thumbnail playback interface, long press the 'M' button to delete or unlock related files. - Q10: Camera showing Memory Error or inconsistent video clip length?
A: Unqualified or third-party SD cards can affect performance and cause reboots. Ensure your TF card meets the recording requirements for a 3-channel dash cam. Contact support for a new memory card if issues persist.
6. Specifications
| Attribute | Value |
|---|---|
| Model Name | M550 Max |
| Screen Size | 3.19 Inch IPS |
| Aperture | F=1.8 |
| Color | Black |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), Czech, Dutch, English, French, German, Italian, Japanese, Polish, Portuguese, Romanian, Russian, Spanish, Turkish |
| Video Format | MP4 |
| Photo Format | JPG |
| Video Code | H.264 |
| Camera Resolution | Front: UHD 4K (3840x2160 @30FPS) QHD 2K (2560x1440 @30FPS) Full HD (1920x1080 @30FPS) |
| Video Resolution / Frame Rate (Front + Rear) | 4K 2160P 30fps+2K 1440P 30fps (Default) 2K 1440P 30fps+2K 1440P 30fps 1080P 30fps+2K 1440P 30fps |
| Video Resolution / Frame Rate (Front + Cabin) | 4K 2160P 25fps+1080P 25fps (Default) 2K 1440P 30fps+1080P 30fps |
| Video Resolution / Frame Rate (Front + Rear + Cabin) | 4K 2160P 25fps+1080P 25fps+2K 1440P 30fps (Default) 2K 1440P 30fps+1080P 30fps+2K 1440P 30fps |
| GPS Logger | Internal |
| G-Sensor | Built-in 3-Axis Acceleration Sensor |
| Loop Recording Feature | Yes |
| Timelapse Record | Support (1 Frame Per Second, Fast Video Playback) |
| Wi-Fi / Application | Support, AZDOME Application |
| Parking Mode | Support (ONLY works when connected to 3-Lead Hardwire Kit) |
| Max External Memory | 512GB (Class 10, U3 Speed) |
| Microphone | Built-in |
| Speaker | Built-in |
| Battery Life | Super Capacitor (1mAh Lithium Metal Battery for time memory only) |
| Power Source | Corded Electric |
| Power Interface | 5V/2.5A |
| Working Temperature | -20°C to 70°C (-4°F to 158°F) |
| Weight | 686g |
| Number Of Lenses | 3 |
| Imaging Sensor | Sony IMX335 |
| Pixels | 800Mega |
| View Angle | 150° |
| Frames Per Second | 30 |
| Special Features | G-Sensor, Motion Detection, SD/MMC Card, Built-in GPS, Anti Vibration, Real Time Surveillance, Wide Dynamic Range, WiFi Function, Voice Control, Parking Monitor |
| Certification | CE, FCC, RoHS, WEEE |

AZDOME Dash Cam Comparison Table (M550 Max, M550 Pro, M550)
7. Warranty & Support
AZDOME provides a one (1) year limited warranty for your product from the date of purchase against defects in material or workmanship.
Contact Support:
For any questions, support, or warranty claims, please contact us at service@azdomevip.com. Please include your order number and product model number in your inquiry.
Note:
- Proof of purchase (online order receipt) is required for all warranty services.
- AZDOME can only provide after-sales service for products purchased directly from AZDOME. If you purchased from another seller, please contact them directly for service or warranty issues.

AZDOME M550 Max Dash Cam
8. User Tips
- Power Connection: The dash cam is designed to be continuously powered. It uses a supercapacitor, not a battery, for primary operation. The small internal battery is only for saving time settings.
- MicroSD Card Formatting: Always format your microSD card with the dash cam before its first use and regularly thereafter (every 1-2 months) to maintain optimal recording performance and prevent data corruption.
- Parking Mode: For 24-hour parking surveillance, a 3-lead hardwire kit (JYX05 or OBD01) is essential. This ensures the dash cam can monitor your vehicle even when the engine is off.
- WiFi Connectivity: The dash cam's WiFi is for direct connection to your smartphone (within 10ft) for live viewing, downloading, and sharing. It does not provide internet access for streaming or cloud uploads.
- Heat Resistance: The supercapacitor design allows the dash cam to withstand extreme temperatures (-4°F to 158°F), reducing the risk of overheating and enhancing durability, especially in hot climates.
- App Performance: If you experience issues with live video not displaying in the AZDOME app, ensure your phone's cellular data is turned off for the app, or configure the app to use WLAN only. Also, verify that location services are enabled for the app.
- Footage Retrieval: For quick access to footage, download directly to your phone via the AZDOME app. For detailed GPS tracking and larger file management, use the AZDOME GPS Player on your computer.