FEKER Alice98Pro

Contents

FEKER Alice98Pro Mechanical Keyboard User Manual

Model: Alice98Pro

Introduction

The FEKER Alice98Pro is an advanced ergonomic mechanical keyboard designed for a wide range of users, from esports enthusiasts to office professionals. It features a unique 3° sloped Alice layout, tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth), full RGB backlighting, QMK/VIA compatibility for extensive customization, and hot-swappable switches for personalized typing experiences. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your Alice98Pro keyboard.

FEKER Alice98Pro Ergonomic Keyboard in black and white, showcasing its unique 3-degree slope and tri-mode capabilities.
Figure 1: FEKER Alice98Pro Ergonomic Keyboard overview.
Exploded view diagram of the FEKER Alice98Pro keyboard's gasket structure, showing layers like knob, upper cover, key cap, shaft body, positioning plate, satellite axis, silicone leaf spring, sandwich cotton, shaft lower pad, sound superior cushion, PCBA, shaft seat cotton, bottom cotton, and bottom cover.
Figure 2: Gasket structure with 5-layer silencer filling and precise structural technology.

Package Contents

Please verify that all items are present in your package:

  • FEKER Alice98Pro Mechanical Keyboard (1 unit)
  • Dust Cover (1 unit)
  • Data Line (USB Type-C cable) (1 unit)
  • Key Puller (1 unit)
  • Substitute Mechanical Shaft (2 units)
FEKER Alice98Pro keyboard packaging showing the keyboard, dust cover, cable, key puller, and spare switches.
Figure 3: Contents included in the FEKER Alice98Pro package.

Setup Instructions

1. Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB Type-C data line to the keyboard's Type-C port and the other end to a powered USB port on your computer or a USB wall adapter. The keyboard features an 8000mAh battery for extended use.

2. Connecting the Keyboard

The Alice98Pro supports three connection modes: Wired (USB Type-C), 2.4G Wireless, and Bluetooth.

Wired Connection:

  • Ensure the keyboard's mode switch (usually located on the back or side) is set to "Wired" or "USB".
  • Connect the USB Type-C data line from the keyboard to an available USB port on your computer.
  • The keyboard should be recognized automatically by your operating system.

2.4G Wireless Connection:

  • Locate the 2.4G USB receiver (dongle), typically stored in a compartment on the keyboard.
  • Plug the 2.4G USB receiver into an available USB port on your computer.
  • Set the keyboard's mode switch to "2.4G".
  • The keyboard should connect automatically. If not, press and hold the designated pairing key combination (refer to specific key combinations in the Operating Instructions section) to initiate pairing.

Bluetooth Connection:

  • Set the keyboard's mode switch to "Bluetooth".
  • On your computer or device, enable Bluetooth and search for new devices.
  • Press and hold the designated Bluetooth pairing key combination on the keyboard (e.g., Fn + 1, Fn + 2, or Fn + 3 for different profiles) until the indicator light flashes, indicating pairing mode.
  • Select "FEKER Alice98Pro" (or similar name) from the list of available Bluetooth devices on your computer/device to complete the pairing process.
  • The keyboard can store up to three Bluetooth profiles, allowing quick switching between devices.
Image showing a laptop, tablet, and smartphone connected to the keyboard, illustrating its multi-device compatibility and quick response times for wired, 2.4G, and Bluetooth connections.
Figure 4: Multi-device compatibility and connection latency.

Operating Instructions

1. Basic Keyboard Functions

  • Power On/Off: Use the physical switch on the keyboard to turn it on or off.
  • Mode Switching: Use the physical switch to select between Wired, 2.4G, and Bluetooth modes.
  • Ergonomic Design: The keyboard features an ergonomic 3° slope and an Alice layout to reduce strain during prolonged use.
Hands positioned on the FEKER Alice98Pro keyboard, demonstrating the ergonomic 3-degree slope for comfortable typing.
Figure 5: Ergonomic design with 3° slope.

2. RGB Backlighting

The Alice98Pro features full-color RGB backlighting with 46 different lighting effects. Use the designated function key combinations (e.g., Fn + [key]) to cycle through effects, adjust brightness, and change colors. Refer to the keyboard's specific keymap for exact controls.

FEKER Alice98Pro keyboard displaying vibrant RGB lighting effects, with a graphic representation of sound waves.
Figure 6: RGB lighting effects.

3. QMK/VIA Customization

The keyboard is compatible with QMK firmware and VIA software, allowing for extensive customization of key assignments, macros, and lighting effects. This powerful tool enables users to personalize the keyboard's functionality and layout to their specific needs.

  • Download the VIA software from the official QMK/VIA website or FEKER's support page.
  • Connect the keyboard via USB Type-C to your computer.
  • Launch the VIA software to detect your keyboard and begin customization.
A stylized image of a computer chip with the FEKER logo, representing the QMK Firmware and VIA Software capabilities for keyboard customization.
Figure 7: QMK Firmware VIA Software for customization.

4. Hot-Swappable Switches

The Alice98Pro features a full key hot-swap design, compatible with three-foot and five-foot shaft bodies. This allows you to easily change mechanical switches without soldering, enabling a customized typing feel.

  • To remove a switch, use the provided key puller to gently pull off the keycap, then use the switch puller to carefully extract the switch from the PCB.
  • To install a new switch, align its pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are straight to avoid bending.
Close-up view of a mechanical keyboard switch being removed or inserted, illustrating the hot-swap feature.
Figure 8: Hot-swappable switch mechanism.

Maintenance

1. Cleaning the Keyboard

  • Keycaps: The PBT keycaps are durable. Use the provided key puller to remove keycaps for thorough cleaning. Wipe them with a damp cloth and mild soap solution, then dry completely before reattaching.
  • Keyboard Body: Use a soft, lint-free cloth to wipe the keyboard surface. For dust and debris between keys, use compressed air.
  • Dust Cover: Utilize the included dust cover when the keyboard is not in use to prevent dust accumulation.

2. Battery Care

  • To prolong battery life, avoid fully discharging the keyboard frequently.
  • Charge the keyboard using the provided Type-C cable and a standard USB power source.
  • Store the keyboard in a cool, dry place when not in use for extended periods.
Battery life indicator showing approximately 7 days with lights on and 30 days with lights off for the 8000mAh battery.
Figure 9: Battery life estimates (laboratory test data, actual use may vary).

Troubleshooting

  • Keyboard not responding:
    • Ensure the keyboard is powered on and the correct connection mode (Wired, 2.4G, or Bluetooth) is selected.
    • For wired connection, check the USB cable and port.
    • For 2.4G wireless, ensure the dongle is securely plugged in and try re-pairing if necessary.
    • For Bluetooth, ensure it's paired correctly and try re-pairing or switching to another Bluetooth profile.
    • Check battery level and charge if low.
  • Keys not registering or double-typing:
    • Due to the hot-swappable design, a switch might be improperly seated. Gently remove the keycap and press the switch firmly back into place.
    • If a specific switch is faulty, replace it with one of the spare switches provided using the switch puller.
  • RGB lighting issues:
    • Ensure RGB lighting is enabled via the keyboard's function keys or VIA software.
    • Check brightness settings.
  • Keyboard not waking up instantly:
    • The Alice98Pro is designed for quick wake-up. If you experience delays, ensure the keyboard is not in a deep sleep mode or that the connection is stable.

Specifications

FeatureDetail
BrandFEKER
ModelAlice98Pro
Layout98 Keys, Alice Ergonomic Layout
Dimensions435.7 * 156.6 * 43.5 MM
Weight~1145G
Connection ModesWired (USB Type-C), 2.4G Wireless, Bluetooth
Battery Capacity8000mAh
Operating Current<255MA
BacklightFull Color RGB (16 million colors), 46 effects
KeycapsOriginal PBT Thermal Sublimation
SwitchesHot-swappable (compatible with 3-pin/5-pin switches)
MatrixFull key no impact (N-key rollover)
Software CompatibilityQMK/VIA
Wrist SupportYes

Switch Specifications:

ParameterWhite Marble Shaft Body (Cross Linear Axis)Flower Seeking Axis (Linear Axis)
Initial Pressure30GFMIN30GFMIN
Conduction Pressure42GF±3 GF40GF±5GF
Total Trip3.5MM±0.3MM3.6MM±0.2MM
Conduction Trigger Travel2.0MM±0.3MM2.0MM±0.2MM
Spring20MM single segment22MM single segment
Bottom Pressure47±5gf50±5gf
Life50 million times50 million times
Detailed specifications for White Marble Shaft Body and Flower Seeking Axis mechanical switches, including initial pressure, conduction pressure, total trip, trigger travel, spring, bottom pressure, and life cycle.
Figure 10: HIFI Linear Axis switch specifications.

Warranty and Support

For any issues not covered in this manual, or for warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase records for reference.

User Tips

  • Wireless Connectivity: The FEKER Alice98Pro is indeed a wireless keyboard, offering both 2.4G and Bluetooth connectivity in addition to a wired option. This provides flexibility for various setups and devices.
  • Instant Wake-up: The keyboard is designed to activate instantly from sleep mode without delay, ensuring a seamless transition back to work or gaming.
  • Customization: Leverage the QMK/VIA software to fully customize your keymap and lighting. This can significantly enhance your typing and gaming experience.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.