1. Introduction
The LCUS Type 1 USB Relay Module (Model HW-667) is an intelligent switch control device designed for various applications requiring USB-controlled switching. It features a high-performance microcontroller and a CH340 USB control chip for reliable communication. The module is equipped with a 5V relay capable of handling significant loads, and includes built-in protection features for enhanced durability.
Key Features:
- Onboard high-performance micro-controller chip.
- Onboard CH340 USB control chip for seamless PC communication.
- Integrated LED power indicator and relay status LED lights for visual feedback.
- Equipped with a 5V relay, rated for 10A / 250VAC, 10A / 30VDC, and 12A 125VAC / 28VDC, ensuring a long operational life of over 100,000 cycles.
- Features over-current protection and relay diode current protection for safety and longevity.
- Compact blue PCB design with metal components.
2. Specifications
| Feature | Specification |
|---|---|
| Model | HW-667 |
| Microcontroller | High-performance onboard chip |
| USB Control Chip | CH340 |
| Relay Type | FL-3FF-S-Z, 5VDC |
| Relay Contact Rating (AC) | 10A / 250VAC, 12A / 125VAC |
| Relay Contact Rating (DC) | 10A / 30VDC, 12A / 28VDC |
| Relay Life | Can absorb 100,000 times in a row |
| Protection Features | Over-current protection, relay diode current protection |
| PCB Dimensions | 49.6 mm x 16 mm |
| USB Communication Baud Rate | 9600 BPS (default) |
| Color | Blue |
| Material | Metal (components), PCB |
| Package Weight | 0.025 kg |
| Package Dimensions (L x W x H) | 6 cm x 2 cm x 1 cm |

3. Setup
3.1 Component Overview

The module consists of a USB-A connector, the CH340 USB-to-serial chip, a microcontroller, a single 5V relay, and screw terminals for connecting external devices. Power and relay status LEDs provide visual indications.
3.2 Driver Installation
Before connecting the module to your computer, ensure that the necessary drivers for the CH340 USB-to-serial chip are installed. These drivers are typically available for Windows, macOS, and Linux operating systems. If your operating system does not automatically install the driver upon connection, you may need to download and install it manually from the CH340 manufacturer's website or a reputable driver repository.
3.3 Physical Connection
- **Connect to PC**: Insert the USB-A connector of the module into an available USB port on your computer. The power LED on the module should illuminate.
- **Wire External Device**: Identify the Normally Open (NO), Common (COM), and Normally Closed (NC) terminals on the relay.
- **COM (Common)**: This is the common terminal for the relay switch.
- **NO (Normally Open)**: When the relay is OFF, this terminal is disconnected from COM. When the relay is ON, it connects to COM.
- **NC (Normally Closed)**: When the relay is OFF, this terminal is connected to COM. When the relay is ON, it disconnects from COM.

4. Operating Instructions
The LCUS USB Relay Module is controlled via a serial communication protocol over its USB connection. The default baud rate for communication is 9600 BPS.
4.1 Communication Protocol
To control the relay, send a 4-byte data packet to the module via the serial port. The structure of the data packet is as follows:
| Byte Position | Description | Default/Value |
|---|---|---|
| Data (1) | Startup Logo | 0xA0 (Hexadecimal) |
| Data (2) | Switch Address Code | 0x01 (Hexadecimal, identifies the first switch) |
| Data (3) | Operation Data | 0x00 (OFF), 0x01 (ON) |
| Data (4) | Check Code | Calculated value (e.g., sum of previous bytes, specific checksum algorithm may apply depending on implementation) |
Example Command (to turn ON relay 1): Send 0xA0 0x01 0x01 [Check Code]
Example Command (to turn OFF relay 1): Send 0xA0 0x01 0x00 [Check Code]
Note: The exact calculation for the "Check Code" (Data 4) is not explicitly provided in the product description. It is typically a checksum or XOR sum of the preceding bytes to ensure data integrity. Refer to specific software libraries or example code for the precise check code implementation.
4.2 LED Indicators
- **Power LED**: Indicates that the module is receiving power via the USB connection.
- **Relay Status LED**: Illuminates when the relay is activated (ON) and turns off when the relay is deactivated (OFF).
5. Maintenance
The LCUS USB Relay Module is designed for low maintenance. Keep the module clean and free from dust and moisture. Avoid exposing it to extreme temperatures or corrosive environments. No user-serviceable parts are inside; do not attempt to disassemble the module.
6. Troubleshooting
- **Module not recognized by PC**:
- Ensure the CH340 driver is correctly installed.
- Try a different USB port or USB cable.
- Verify the module is properly seated in the USB port.
- **Relay not switching**:
- Check the power LED to ensure the module is powered.
- Verify that the correct serial commands are being sent, including the correct baud rate (9600 BPS) and data packet structure (startup logo, address code, operation data, check code).
- Ensure the external device connected to the relay terminals is correctly wired and within the relay's specified voltage and current ratings.
- Observe the relay status LED for visual confirmation of switching attempts.
- **Inconsistent behavior**:
- Check for loose wiring connections.
- Ensure there is no electromagnetic interference affecting the module or its connections.
- Verify the integrity of the check code in your communication protocol.
7. User Tips
- For advanced control, consider using a serial terminal program or writing custom scripts in Python/C# to send the specific 4-byte commands.
- Always double-check your wiring, especially when dealing with AC loads, to prevent damage to the module or connected devices.
- When experimenting with the communication protocol, start with simple ON/OFF commands and verify the relay status LED before connecting critical loads.
8. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.