1. Introduction
Thank you for choosing the Ainavi Car Multimedia Player. This manual provides essential information for the proper installation, operation, and maintenance of your new device. Please read it thoroughly before use to ensure optimal performance and safety.
The Ainavi Car Multimedia Player is designed to enhance your driving experience with advanced features such as a Qualcomm 8-Core processor, Android 13 operating system, wireless CarPlay and Android Auto, GPS navigation, and multimedia capabilities. It is specifically designed for Toyota Prius Plus V Alpha models from 2012 to 2017.

2. Package Contents
Please check the package carefully to ensure all items are present and undamaged:

- Multimedia Player Screen (LHD or RHD frame, depending on selection)
- Power Cable Harness
- 2 x USB Cables
- Rear Camera Input Cable
- GPS Antenna
- SIM+4G Antenna (for 4G version only)
Note: The package dimensions are approximately 30cm (length) x 20cm (width) x 15cm (height), with a weight of 1.7kg.
3. Installation and Setup
The Ainavi Car Multimedia Player is designed for plug-and-play installation, making the setup process straightforward. However, professional installation is recommended to ensure correct wiring and avoid damage to your vehicle's electrical system.
3.1 Important Pre-Installation Note

If your vehicle is equipped with a JBL or Harman Kardon sound system, please contact customer service with a picture of the back of your original radio before installation. This is crucial for ensuring compatibility and providing the correct wiring harness.
3.2 General Installation Steps
- Remove Original Unit: Carefully remove your vehicle's existing radio unit and dashboard trim.
- Connect Wiring Harness: Connect the provided power cable harness to your car's original wiring. Ensure all connections are secure.
- Connect Antennas: Attach the GPS antenna and, if applicable, the SIM+4G antenna.
- Route Cables: Route the USB cables and SIM card slot cable to a convenient storage compartment (e.g., passenger side). The GPS and 4G antennas should be installed on the right front portion of the dashboard or within the A-pillar, with the antenna module's black side facing upwards for optimal signal reception.
- Install Multimedia Player: Secure the new multimedia player into the dashboard opening.
- Test Functionality: Before reassembling the dashboard, turn on the vehicle and test all functions of the multimedia player, including audio, navigation, and connectivity.
- Reassemble Dashboard: Once all functions are verified, carefully reassemble the dashboard trim.


4. Operating Instructions
Your Ainavi Car Multimedia Player offers a wide range of features for an enhanced in-car experience.
4.1 User Interface (Ainavi UI 5.0)
The device runs on Android 13 and features the intuitive Ainavi UI 5.0. This interface supports app downloads and customizable shortcuts, allowing you to tailor the home screen to your preferences. It also includes Day and Night Modes for optimal visibility in varying light conditions.

4.2 Wireless CarPlay & Android Auto
Enjoy seamless smartphone integration with wireless CarPlay and Android Auto (available on A2, G5, H5, and H6 models). This feature allows you to access navigation, music, calls, and messages directly from your phone, displayed on the multimedia player's screen.


Note: The A3 model does not support CarPlay or Android Auto functions.
4.3 Global Positioning System (GPS)
The H6 model boasts advanced positioning with support for GPS, Galileo, GLONASS, and BeiDou satellite systems. This multi-constellation technology delivers faster and more accurate location tracking for precise navigation and route guidance.

4.4 Multimedia Entertainment
Enjoy HD video and lossless music playback. Connect to the internet to stream content from platforms like Netflix and YouTube. The device supports 4K video playback and features a Picture-In-Picture function for multitasking.
The split-screen functionality allows you to run two applications simultaneously, enhancing efficiency and productivity.

4.5 Steering Wheel Control (SWC)
After installation, you can use the buttons on your steering wheel to control the screen, providing convenience and reducing distractions while driving.

4.6 Gyroscope Function
The gyroscope function provides real-time information about the car's tilt angle during driving, greatly improving driving safety.

4.7 Digital Theater System (DTS)
Experience enhanced audio quality with the Digital Theater System (DTS). This feature allows for advanced sound customization, including EQ settings, bass enhancement, and sound field adjustments, to create an immersive listening experience.

4.8 Full Lamination Technology
The screen is produced using full lamination technology, similar to mobile phones, which significantly improves the quality of the displayed image and color reproduction. This technology also reduces reflection and prevents dust from entering the screen.

4.9 Powerful Cooling Fan
The device includes a built-in fan providing a maximum of 6000 revolutions per minute, effectively reducing CPU chip temperature and making operation smoother. CPU temperature reaches around 63°C (fan not started) in 0-10 minutes, drops to 50°C (fan activated) in 10-15 minutes, and stabilizes at around 47°C (fan continues operation) in 16-30 minutes.

4.10 4G+5G WiFi Connectivity
G5, H5, and H6 models support built-in 4G LTE, GSM, and WCDMA capabilities. A SIM card slot extension cable can be routed to the passenger storage area for convenience. Please note that 4G network compatibility varies by region and some regions may not support them. The A1/A2 models support WiFi (2.4GHz), while G5/H5/H6 models support WiFi (5GHz).

5. Maintenance
To ensure the longevity and optimal performance of your Ainavi Car Multimedia Player, follow these maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the display or finish.
- Temperature: Avoid exposing the device to extreme temperatures, both hot and cold, as this can affect its electronic components.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates can usually be performed via the device's settings menu when connected to Wi-Fi.
- Cable Management: Ensure all cables are properly routed and secured to prevent pinching or damage, which could lead to connectivity issues.
6. Troubleshooting
If you encounter issues with your multimedia player, refer to the following common troubleshooting steps:
- No Power: Check all power cable connections. Ensure the vehicle's ignition is on. If the issue persists, consult a professional installer.
- No Sound: Verify speaker connections and audio settings (EQ, DTS). Check the volume level on both the player and your vehicle's audio system.
- GPS Signal Issues: Ensure the GPS antenna is correctly installed with the black side facing upwards and has a clear view of the sky. Check for any obstructions.
- CarPlay/Android Auto Not Connecting: Ensure your phone's Bluetooth and Wi-Fi are enabled. Try restarting both your phone and the multimedia player. Confirm your specific model supports these features (A3 models do not).
- Touchscreen Unresponsive: Try restarting the device. If the problem continues, a factory reset might be necessary (note: this will erase all user data).
- Compatibility Issues: This unit is designed for Toyota Prius Plus V Alpha models from 2012-2017. If your vehicle is a different model year (e.g., 2018 Prius Plus), it may not be compatible. Always verify compatibility before purchase and installation.
For persistent issues, please contact Ainavi customer support.
7. Specifications
Below are the general specifications for the Ainavi Car Multimedia Player. Specific features may vary by model (A2, A3, A4, G5, H5, H6).

| Attribute | Value |
|---|---|
| Brand Name | Ainavi |
| Operating System | Android 13 |
| RAM | 8G (varies by model) |
| ROM | 256G (varies by model) |
| Chipset | 8 core (Qualcomm Snapdragon 665 for H6) |
| Processor Speed | 2.0GHz |
| Display Size | 9-inch |
| Resolution | HD 1280*720 |
| Output Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.6kg |
| Special Features | Steering wheel control, 3G/4G Network support, Can-Bus, Built-in GPS, MP3 players, CarPlay, Android Auto, Split Screen |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (including English, Chinese, Spanish, French, German, etc.) |
| Accessory Type | Frame+Cable+CANBUS |
| Material | Glass |
8. User Tips
- Compatibility Check: Always double-check the compatibility of the multimedia player with your specific car model and year. This unit is designed for Toyota Prius Plus V Alpha 2012-2017.
- Sound System Verification: If your car has a premium sound system like JBL or Harman Kardon, it's crucial to inform customer service and provide photos of your original radio's rear connections to ensure you receive the correct wiring harness.
- Cable Routing: For optimal performance and a clean installation, follow the recommended cable routing for antennas and USB ports as described in the installation section.
9. Warranty and Support
The Ainavi Car Multimedia Player comes with a 1-year warranty. For any technical assistance, troubleshooting, or warranty claims, please contact Ainavi customer support through the seller's official channels.
10. Certifications
This product complies with international quality and safety standards, holding the following certifications:

- CCC (China Compulsory Certification)
- CE (Conformité Européenne)
- RoHS (Restriction of Hazardous Substances)
- WEEE (Waste Electrical and Electronic Equipment)