1. Product Overview
The SW900 LCD Display Panel is a versatile control and information unit designed for electric bicycles and scooters. It is compatible with 24V, 36V, and 48V systems and can automatically identify the voltage. This display provides essential riding data and allows for control over the e-bike system.

Key Features:
- Automatic voltage identification (24V, 36V, 48V).
- Real-time display of battery charge and power consumption.
- Displays riding speed, time, power, and temperature.
- Color display for enhanced data visibility.
- Functions as a trip computer and e-bike system controller.
- Adjustable wheel size setting for various applications.
- Available with SM Plug or Waterproof Plug options.
2. Safety Information and Warnings
Please read and understand the following safety guidelines before installing or operating the SW900 LCD Display Panel.
⚠ Warning:
- Do not use the product in extreme environments such as areas with high temperature, high humidity, excessive dust, or flammable materials.
- Avoid subjecting the product to severe impacts or vibrations, as this may cause damage.
- Do not attempt to disassemble, modify, or repair this product yourself. Unauthorized modifications can lead to malfunction, injury, or void the warranty.
- Keep the product out of reach of children.
3. Installation Guide
Before installation, ensure all accessories are complete and compatible with your e-bike system. The display is designed for cost-effective installation with clearly set individual joints.
3.1 Unpacking and Inspection
- Carefully unpack the SW900 LCD Display Panel and all included components.
- Verify that all accessories are present and undamaged.
- Confirm the plug type (SM Plug or Waterproof Plug) matches your e-bike's controller.
3.2 Mounting the Display
The display is designed to be mounted on your e-bike's handlebars. The mounting clamp is suitable for standard handlebar diameters.

3.3 Electrical Connection
Connect the display to your e-bike's JN controller using the appropriate plug type. Ensure the connection is secure.


The display uses a 5-pin connector. Ensure the plug type (SM Plug or Waterproof Plug) matches your e-bike's wiring harness for proper connection.
4. Operating Instructions
Once installed and powered on, the SW900 display will provide various data and control options for your e-bike.
4.1 Displayed Information
The LCD screen provides a clear overview of your riding status:
- Battery Indicator (F-E): Shows the current battery charge level.
- Speed: Current riding speed (Km/h).
- ODO (Odometer): Total distance traveled.
- MODE: Current riding mode (e.g., ECO).
- PAS (Pedal Assist System) Level: Indicates the level of pedal assistance.
- Error Codes: Displays error messages if a fault is detected (e.g., "Error 008").
4.2 Basic Operation
The SW900 display functions as a trip computer and allows control over the e-bike system. Specific button functions and menu navigation will depend on the e-bike's controller and firmware. Generally, buttons are used to:
- Power On/Off the system.
- Toggle between display modes (e.g., Trip Distance, Max Speed, Average Speed).
- Adjust PAS levels.
- Access settings to change parameters like wheel size.
Refer to your e-bike's main controller manual for detailed instructions on specific button operations and advanced settings.
5. Maintenance
To ensure the longevity and optimal performance of your SW900 LCD Display Panel, follow these simple maintenance guidelines:
- Cleaning: Wipe the display screen and body with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic or screen.
- Protection: While the display has an IP56 waterproof rating, avoid prolonged exposure to heavy rain or submersion in water.
- Storage: When not in use for extended periods, store the e-bike and display in a dry, temperate environment, away from direct sunlight and extreme temperatures.
- Cable Inspection: Periodically check the connection cables for any signs of wear, cuts, or damage. Ensure plugs are securely seated.
6. Troubleshooting
This section addresses common issues you might encounter with your SW900 LCD Display Panel.
6.1 Common Issues and Solutions
- Q: The display does not power on or shows no information.
- A: Check the electrical connections to ensure they are secure and properly seated. Verify that your e-bike's battery is charged and powered on. Inspect the cables for any visible damage.
- Q: "Error 008" or other error codes are displayed.
- A: Error codes typically indicate a fault within the e-bike system (e.g., motor, controller, sensor). Consult your e-bike's main controller manual for a list of error codes and their meanings. Often, turning the system off and on again can reset minor errors. If the error persists, professional inspection may be required.
- Q: Inaccurate speed or distance readings.
- A: Ensure the wheel size setting in the display's menu is correctly configured for your e-bike's wheel diameter. Refer to the operating instructions or your e-bike's manual for how to adjust this setting.
- Q: Cannot install the display.
- A: Check if the device model is compatible with your e-bike's controller and mounting area. Ensure there are no foreign objects obstructing the installation area or the cable connections.
If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact customer support.
7. Specifications
Detailed technical specifications for the SW900 LCD Display Panel:

| Feature | Detail |
|---|---|
| Type | LCD SW900 Display |
| Voltage Compatibility | 24V, 36V, 48V (Automatic Identification) |
| Controller Compatibility | JN controller |
| Plug Type | 5-pin (Available in SM Plug / Waterproof Plug) |
| Material | LCD, Plastic |
| Color | Black |
| Display Dimensions (L x H) | 110mm x 61mm (4.3in x 2.4in) |
| SM Plug Wire Length | Approx. 167cm (65.74 inches) |
| Waterproof Plug Wire Length | Approx. 19cm (7.48 inches) |
| Weight | Approx. 202.6g - 240.2g (depending on plug type) |
| Waterproof Rating | IP56 |
8. User Tips
- Cable Management: Properly route and secure all cables to prevent snagging or damage during riding.
- Screen Visibility: Adjust the display angle to minimize glare and ensure optimal readability in various lighting conditions.
- Regular Checks: Before each ride, quickly check the display for any error codes or unusual readings to ensure safe operation.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official product page or contact the seller directly. A user manual in PDF format is also available for download:
When contacting support, please have your product model (SW900) and any relevant error codes ready.