1. Introduction
Welcome to the IOWODO R50 Smartwatch user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new smartwatch. The IOWODO R50 is designed to enhance your daily life with features like Bluetooth calling, a voice assistant, extensive sports tracking, and health monitoring.
The IOWODO R50 Smartwatch is available in 5 stylish colors, offering a personalized smart life experience.
2. Important Safety Guide
- If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
- Make sure your skin is dry before you put your watch back on.
- Please do not wear your watch too tight.
- Prolonged rubbing and pressure may irritate the skin, so give your wrist a break by removing the watch regularly.
- Some people with allergic skin may react when their skin is exposed to materials used in watches for a long time. This may be caused by allergies, environmental factors, prolonged exposure to irritants such as sweat and soap, or other factors. If you have known skin allergies, please pay special attention when wearing the watch.
3. What's in the Box
Upon unboxing your IOWODO R50 Smartwatch, you should find the following items:
- IOWODO R50 Smartwatch
- 2 x Straps (one pre-attached, one spare)
- 1 x Charging Cable
- User Manual (this document and a PDF version)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | iowodo |
| Model | R50 |
| Screen Size | 1.85 Inch |
| Resolution | 320*386 |
| Screen Material | TFT, Glass |
| Touch Screen | Yes |
| Bluetooth Version | 5.3 |
| Battery Capacity | 350 mAh |
| Charging Time | 3 hours |
| Battery Life | 7-10 days (typical use), 4-5 days (medium use) |
| Waterproof Grade | Life Waterproof (10M) |
| System Compatibility | Android Wear, iOS (All Compatible) |
| App Name | Dafit |
| Voice Assistant | Built-in (Yes) |
| Metrics Measured | Blood Oxygen Monitor, Sleep Monitor, Stress Monitor |
| Activity Tracked | Steps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker |
| Functions | Passometer, Sleep Tracker, Message Reminder, Call Reminder, Answer Call, Dial Call, Alarm Clock, Calorie Counter, Heart Rate Tracker, Countdown, Calculators |
| Multiple Dials | Yes |
| GPS | No |
| SIM Card Slot | None |
| Rear Camera | None |
| WIFI | No |
| Band Material | Silica Gel |
| Band Width | 20mm |
| Band Length | 230mm (Min: 150mm, Max: 240mm wrist circumference) |
| Weight | 26.5g |
| Operating Temperature | -20℃ to 70℃ |
| Certifications | CE, FCC, RoHS |
Detailed dimensions of the smartwatch and its band.
5. Setup
5.1. Charging Your Watch
Before using your R50 for the first time, charge the battery to its full capacity. It is recommended to use a conventional charger above 5V for charging, not the USB interface at the computer terminal.
- Place the magnetic charger on the magnetic charging points of the watch.
- While your watch is charging, the screen will show its progress.
- Once the battery is fully charged, remove the charger.
The image illustrates the magnetic charging connection and highlights the excellent battery life (7-10 days typical, 4-5 days medium use) and 2.5 hours charging time for the 350mAh battery.
5.2. Install Da Fit App
The IOWODO R50 Smartwatch requires the Da Fit app for full functionality. You can download the Da Fit App from the Apple App Store (for iOS devices) or Google Play Store (for Android devices). Alternatively, you can scan the QR code provided in the original manual to download the application.
Refer to the original PDF manual for the specific QR code for app download.
5.3. Device Binding
5.3.1. Bluetooth Connection
To connect your smartwatch to your smartphone:
- After the watch is connected to the APP, the APP will display a Bluetooth connection pairing reminder. Please click 'pairing' to enable Bluetooth call functionality.
- If you do not click 'Pair Bluetooth' on the APP interface, you will need to manually go to your phone's settings, then Bluetooth, and search for the watch's Bluetooth device to pair and connect.
- Note for iPhone users: If your iPhone was previously connected to this watch via Bluetooth, when binding this watch again, you need to go to "Mobile Phone - Settings - Bluetooth - Click on this watch Bluetooth device - Ignore Bluetooth" to unpair it before attempting to bind again.
- Important Note: The distance between your mobile phone and the watch should be kept less than 10 meters for a stable connection. If disconnection occurs, please refresh the interface of the APP.
For a visual guide, you can scan the QR code provided in the original manual to follow video instructions for connecting the watch.
Refer to the original PDF manual for the specific QR code for the video connection guide.
5.3.2. Message Push (Notifications)
To receive notifications on your smartwatch:
- In the Da Fit App, navigate to 'Device' then 'Push Message'. Open and enable the specific apps from which you wish to receive push messages.
- Note 1: The Da Fit App needs to keep running in the background of your phone. Refer to the 'APP-My-Background Running Protection Guide' within the app for steps to ensure this.
- Note 2: The Da Fit App needs to have notification rights enabled on your phone. Refer to 'APP-Device-Message Push-Notification Rights-Allow Da Fit' within the app for steps.
- Note 3 for iPhone users: You need to manually open your phone's 'Settings', then 'Bluetooth', select 'Device Details' for your watch, and 'Turn on sharing system notifications'.
6. Operating Your Watch
6.1. Control Your Watch
6.1.1. Power Button
- Press:
- Wake the screen
- Turn off the screen
- Return to the home screen
- Hold:
- Power on / off the watch
6.1.2. Touch Screen
- Hold the home screen to change the watch face.
- Swipe to go to different interfaces.
- Tap to enter the function.
- Swipe the screen to the right to return to the previous interface.
6.2. Watch Settings
Access the watch settings to customize various features:
- Display:
- Brightness adjustment: Adjust the screen brightness.
- Screen-off time: Set the duration the screen stays on.
- Dial switching: Choose from 6 built-in dial options or customize via the app.
- View of master menu: Select from 8 display styles for the main menu.
- Screen-on switch with wrist turning: Enable or disable the wrist-to-wake feature.
- Vibrate & Ring:
- Vibration only: Set notifications to vibrate only. Adjust vibration level.
- Vibrate & ring: Set notifications to vibrate and ring. Adjust vibration level.
- Mute: Set notifications to silent mode.
- DND Mode (Do Not Disturb): Enable to disable message and incoming call notifications.
- Language: Change the watch's display language.
- Low Power mode: Enable to disable vibration, wrist-to-wake, and reduce screen brightness to conserve battery.
- Phone call:
- Enable or disable the function of answering calls on the watch.
- Reset watch calls, including deleting call logs and contacts.
- System:
- Restart: Reboot your watch.
- Shut down: Turn off your watch.
- Restore factory: Reset the watch to factory settings. Note that all your data and settings will be deleted.
- About: View device information including device name, Bluetooth name, version, and a QR code to download the Da Fit app.
6.3. Key Features Overview
6.3.1. Wireless Communication
The IOWODO R50 allows for seamless wireless communication directly from your wrist.
- Answer and Make Calls on Wrist: Connect via Bluetooth to handle calls directly from your smartwatch.
- Built-in Voice Assistant: Use voice commands for various functions.
- Intelligent Message Notification: Receive alerts for messages and other app notifications.
The smartwatch supports answering and making calls, features a built-in voice assistant, and provides intelligent message notifications.
6.3.2. Health Monitoring
Manage your health 24 hours a day with continuous monitoring features.
- Heart Rate Monitoring: Track your heart rate throughout the day.
- Blood Oxygen Monitoring: Monitor your SpO2 levels.
- Sleep Monitoring: Analyze your sleep patterns and quality.
- Stress Monitoring: Keep track of your stress levels.
The smartwatch provides continuous heart rate, blood oxygen, and sleep monitoring.
Detailed views of heart rate, sleep, and blood oxygen monitoring data within the companion app.
6.3.3. 100+ Sport Modes
Track your activity data throughout the day, including steps, distance, and calories burned, across a wide range of sports.
The smartwatch supports over 100 sport modes, tracking various metrics like steps, calories, and heart rate during activities.
The IOWODO R50 offers tracking for over 100 sports, providing comprehensive activity data.
6.3.4. Custom Dials & Display
Personalize your smartwatch with a variety of custom dials and a large HD display.
- Large 1.85" HD Panel: Enjoy a clear and vibrant display.
- Personalized Spheres: Choose from numerous watch faces to match your individual style.
The large 1.85-inch HD display supports personalized watch faces for individual style.
6.3.5. Additional Smart Features
- Weather Forecast: Get real-time meteorological information.
- Music Control: Manage your music playback directly from your watch.
- Calculator: A convenient calculator function.
- Stopwatch: Use the stopwatch for timing activities.
- Drink Water / Sedentary Reminders: Receive alerts to stay hydrated and active.
- Alarm Adjustment: Set and manage alarms.
The smartwatch offers weather forecasts, custom dial options, and music control.
The smartwatch includes a calculator and stopwatch function.
Additional features include meteorological information, music control, drink water/sedentary reminders, and alarm adjustment.
6.3.6. Women's Health Tracking
The smartwatch can help track your menstrual cycle, identify irregular symptoms, and predict patterns associated with daily activities and exercise.
The smartwatch provides tracking for menstrual cycles, fertile windows, and ovulation.
7. Maintenance
Proper maintenance ensures the longevity and optimal performance of your IOWODO R50 Smartwatch:
- Cleaning: If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
- Skin Care: Always ensure your skin is dry before wearing the watch.
- Wearing Comfort: Avoid wearing your watch too tightly. Prolonged rubbing and pressure can irritate the skin. Regularly remove the watch to give your wrist a break.
- Allergies: If you have known skin allergies, pay special attention when wearing the watch, as prolonged exposure to materials can cause reactions.
8. Troubleshooting
Here are some common issues and their solutions:
- Bluetooth Disconnection: If your watch disconnects from the app, ensure the distance between your phone and watch is less than 10 meters. Try refreshing the interface of the Da Fit app.
- Bluetooth Pairing Issues: If Bluetooth calling is not working, ensure you clicked 'pairing' when prompted by the app. If not, manually go to your phone's Bluetooth settings and search for the watch to pair. For iPhones, if previously connected, 'Ignore Bluetooth' for the device in settings before re-pairing.
- Notifications Not Received:
- Ensure the Da Fit app is running in the background on your phone.
- Verify that the Da Fit app has notification rights enabled in your phone's settings.
- For iPhone users, ensure 'sharing system notifications' is turned on in your phone's Bluetooth settings for the watch.
- Watch Not Turning On: Ensure the watch is fully charged. If it still doesn't turn on, try holding the power button for an extended period.
9. User Tips
No specific user tips based on reviews or Q&A are available at this time.
10. Warranty and Support
For detailed warranty information and comprehensive support, please refer to the full user manual PDF available from the manufacturer or seller. You can access the PDF manual via this link: IOWODO R50 Smartwatch User Manual (PDF).
If you encounter issues not covered in this manual or require further assistance, please contact the IOWODO customer support or your point of purchase.