CNCEST 150 type mill

Contents

CNCEST 2200W Electric Cereals Grinder Instruction Manual

Model: 150 Type Mill

1. Introduction

Thank you for choosing the CNCEST 2200W Electric Cereals Grinder. This high-efficiency machine is designed for grinding various dry cereals into flour or grits, suitable for commercial and household use. Its robust construction and powerful motor ensure reliable performance for a wide range of applications.

CNCEST 2200W Electric Cereals Grinder in operation, showing corn being fed into the funnel and ground flour collecting in a sack.
Figure 1: Cereals Grinder in operation, highlighting high working efficiency with specifications like Grinding Disc Diameter 150mm/5.91in, Crushing Speed >54kg/h/120lbs/h, Power 2200W, Rated Speed 1400r/min, Smallest Grinding Diameter 60 Mesh.
Video 1: Overview of the Cereals Grinder, demonstrating its components and general appearance.

2. Safety Instructions

Please read and understand all safety instructions before operating the machine to prevent injury and damage.

  • Electrical Safety: Ensure the machine is connected to a 220V power source with appropriate grounding. Do not operate with wet hands or in wet conditions. Unplug the machine before any cleaning, maintenance, or if it will be unused for an extended period.
  • Dry Grinding Only: This machine is designed for dry milling. Do NOT use it to grind wet, oily, or moist ingredients (e.g., fresh olives, wet grains) as this can cause rust, damage the grinding mechanism, and pose an electrical hazard.
  • Moving Parts: Keep hands, hair, loose clothing, and tools away from all moving parts during operation.
  • Stable Placement: Always operate the grinder on a stable, level surface to prevent tipping or movement.
  • Heat Dissipation: Ensure the cooling holes on the motor are not blocked to allow for proper heat dissipation. Overheating can damage the motor.
  • Noise Level: This is a high-speed commercial pulverizer. Expect some operational noise, especially during heavy use.
  • Children and Pets: Keep children and pets away from the machine during operation and when it is plugged in.

3. Package Contents

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, please contact customer support immediately.

  • 1x Electric Grain Grinder (Main Unit)
  • 1x Funnel (Large Capacity)
  • 2x Durable Brackets (for stable support)
  • Other Accessories for Assembly (bolts, nuts, wrench, etc.)
All components of the Cereals Grinder laid out, including the main unit, funnel, two support brackets, and various assembly accessories.
Figure 2: Components included in the package for the Cereals Grinder.

Note: Your product may be shipped in two separate packages (main unit + funnel). Please ensure both arrive before assembly.

4. Specifications

FeatureSpecification
Brand NameCNCEST
MaterialCast Iron, Stainless Steel
ProcessGalvanizing
Power SourceElectricity
Power2200W
Voltage220V
Rated Speed1400r/min
Grinding Disc Diameter150mm / 5.91in
Smallest Grinding Diameter60 Mesh
Crushing Speed>54kg/h / 120lbs/h
Rotation DirectionCounterclockwise
Plug TypeEU Standard
Assembly RequiredYes
Installation TypeFreestanding
Machine Size (L*W*H)58*43*27cm / 22.83*16.93*10.63inch
Machine Total Height (with funnel)80cm / 31.5in
OriginMainland China

Milling Capacity:

  • Corn: ≥ 60kg / h
  • Rice: ≥ 75kg / h
  • Wheat: ≥ 75kg / h
  • Paddy rice: ≥ 50kg / h

Refining Capacity:

  • Soybeans: ≥ 50kg / h
  • Rice: ≥ 50kg / h
Cereals Grinder with dimensions labeled: 80cm total height, 58cm length, 43cm width, 27cm depth. Various grains are shown next to the machine.
Figure 3: Dimensions of the Cereals Grinder and examples of grains it can process.

5. Assembly Instructions

The Cereals Grinder requires some assembly before first use. Follow these steps carefully:

  1. Attach the Brackets: Securely fasten the two durable brackets to the main grinder unit using the provided bolts and nuts. Ensure they are tightened properly to provide stable support.
  2. Install the Funnel: Place the large capacity funnel onto the designated opening at the top of the grinder. Ensure it sits firmly and is stable for loading ingredients.
  3. Check Connections: Double-check all connections and ensure all bolts are tightened.
Detailed view of the Cereals Grinder showing the large capacity funnel and the durable bracket providing stable support.
Figure 4: Detailed information on the large capacity funnel and durable bracket for stable support.
Close-up of the funnel and the durable bracket, emphasizing their design for easy loading and stability.
Figure 5: Funnel and durable bracket details.

Important Note on Rust: The product is made of cast iron and may develop some surface rust during long shipping times. This is normal and can be removed with derusting water before initial use.

6. Operating Instructions

Follow these steps for safe and effective operation of your Cereals Grinder:

  1. Preparation: Ensure the machine is fully assembled, stable, and plugged into a suitable 220V power outlet. Place a collection container (e.g., a sack) under the output chute.
  2. Adjust Grinding Thickness: Use the adjustment knob located on the side of the grinding chamber to set the desired fineness. Turning the knob allows you to achieve various textures, from coarse grits to fine flour.
  3. Power On: Turn on the machine. Allow it to reach full operating speed before feeding ingredients.
  4. Load Ingredients: Slowly feed dry cereals (corn, rice, wheat, etc.) into the large capacity funnel. Use the practical insert to control the input speed, ensuring a steady flow without overloading the machine.
  5. Monitor Grinding: Observe the output and adjust the thickness knob as needed.
  6. Power Off: Once grinding is complete, turn off the machine and allow it to come to a complete stop before unplugging.
Diagram showing the adjustment knob on the Cereals Grinder and the progression from corn grains to corn grits to corn flour, illustrating adjustable output thickness.
Figure 6: Adjustable output thickness using the adjustment knob.
Close-up of the Cereals Grinder showing a prolonged stud for stable operation and a practical insert for controlling input speed.
Figure 7: Design features including the prolonged stud and practical insert for controlled feeding.

Caution: Do not tighten the screw of the grinding blade too tightly, as this can damage the blade and affect performance.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Cereals Grinder.

  • Cleaning: Always unplug the machine before cleaning. After each use, clean any residual flour or grain from the funnel, grinding chamber, and output chute. Use a dry brush or cloth. Do not use water directly on electrical components.
  • Rust Removal: If rust appears on the cast iron parts, use a suitable derusting agent to clean it.
  • Cooling System: Periodically check the cooling holes on the motor for dust or debris. Keep them clear to ensure efficient heat dissipation.
  • Grinding Disc Inspection: Inspect the grinding discs regularly for wear. Worn discs will reduce grinding efficiency and quality. Replace them if necessary.
  • General Inspection: Check all bolts and connections periodically to ensure they remain tight.
Diagram showing the efficient cooling system of the Cereals Grinder, with cooling holes on the motor and high support legs providing space for heat dissipation.
Figure 8: Efficient cooling system with cooling holes and high support legs.

8. Troubleshooting

If you encounter issues with your Cereals Grinder, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
Machine does not startNo power, incorrect voltage, loose connectionCheck power cord, ensure 220V supply, verify all connections are secure.
Poor grinding performance (e.g., inconsistent fineness, slow output)Grinding discs worn, thickness adjustment incorrect, wet ingredients, overloadedInspect/replace grinding discs, adjust thickness knob, ensure ingredients are completely dry, feed ingredients slowly.
Excessive noise or vibrationNormal for commercial unit, loose components, foreign object in grinding chamberSome noise is expected. Check for loose bolts or foreign objects (unplug first!).
Machine overheatsBlocked cooling holes, continuous heavy useClear cooling holes. Allow machine to cool down between extended uses.
Missing or damaged accessories upon deliveryShipping issue, packaging errorContact customer support for reissuance.

9. User Tips

Based on common user inquiries, here are some additional tips for using your Cereals Grinder:

  • Grinding Sugar: While primarily for cereals, this dry mill can grind sugar into powdered sugar. Ensure the sugar is completely dry to prevent clumping and potential damage to the machine. Test with a small quantity first.
  • Malting/Crushing for Brewing: For applications like beer brewing that require crushed malt rather than fine flour, utilize the adjustable output thickness knob. Adjust it to a coarser setting to achieve the desired crush without over-grinding.
  • Avoid Oily/Wet Ingredients: Reiterate that the machine is strictly for dry ingredients. Do not attempt to grind items with high moisture or oil content, such as fresh olives, as this will lead to rust and machine malfunction.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.