1. Introduction
Welcome to the IOWODO R30Pro Smart Watch user manual. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new smartwatch. The R30Pro is designed to enhance your daily life with its 1.85-inch HD display, Bluetooth calling, AI voice assistant, comprehensive health monitoring (heart rate, SpO2, sleep, stress), and over 100 sports modes.
2. Important Safety Information
Please read the following safety guidelines carefully before using your IOWODO R30Pro Smart Watch:
- If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
- Ensure your skin is dry before wearing the watch.
- Do not wear your watch too tightly. Prolonged rubbing and pressure may irritate the skin. Regularly remove the watch to give your wrist a break.
- Individuals with sensitive skin may experience reactions to materials used in the watch. This can be due to allergies, environmental factors, prolonged exposure to irritants like sweat and soap, or other factors. If you have known skin allergies, exercise caution when wearing the watch.
3. Package Contents
The IOWODO R30Pro Smart Watch package includes:
- IOWODO R30Pro Smart Watch
- Watch Straps (x2)
- Magnetic Charging Cable (x1)
4. Setup Guide
4.1. Charging the Watch
Before using your R30Pro for the first time, fully charge the battery. It is recommended to use a conventional charger with an output greater than 5V. Avoid using the USB interface of a computer for charging.
- Place the magnetic charging cable onto the magnetic charging points on the back of the watch.
- The watch screen will display the charging progress.
- Once the battery is fully charged, remove the charging cable.
4.2. App Installation
To unlock the full features of your smartwatch, install the Da Fit app on your smartphone.
- Download the Da Fit app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- Alternatively, scan the QR code below with your phone's camera to download the app.

4.3. Device Binding
Follow these steps to connect your R30Pro Smart Watch to the Da Fit app:
- Enable Bluetooth on your mobile phone.
- Open the Da Fit app and tap on "ADD A Device".
- The app will scan for nearby devices. Select the MAC address that corresponds to your watch to initiate the connection.
- Confirm the pairing request on your phone by selecting "Pair". The binding process will then complete successfully.
Note: Message notifications will only be received if your watch is connected to the Da Fit app, the app is running in the background on your phone, and "Notification Alerts" is enabled within the app settings.

5. Operating Instructions
5.1. Watch Controls
Your R30Pro Smart Watch features a touchscreen and two physical buttons for navigation and control:
Touch Screen
- Hold: Press and hold the home screen to change the watch face.
- Swipe: Swipe across the screen to navigate through different interfaces (e.g., notifications, activity data).
- Tap: Tap on an icon or option to enter a function or select an item.
- Swipe Right: Swipe the screen to the right to return to the previous interface.
Power Button (Side Button)
- Short Press:
- Wake the screen.
- Return to the home screen.
- Enter the menu interface from the home screen.
- Long Press:
- Power on or power off the watch.
Sport Button (Lower Side Button)
- Short Press:
- Wake the screen.
- Enter/Exit the sport interface.
- Pause/resume the current sport activity.

5.2. Key Features and Functions
Display and Customization
The R30Pro features a vibrant 1.85-inch HD TFT display. You can personalize your watch with various watch faces.
- Dial Switching: Choose from 6 built-in dial options directly on the watch, or customize and download more through the Da Fit app.
- Menu View: Select from 8 different main menu display styles to suit your preference.



Bluetooth Calling & AI Voice Assistant
Connect your watch to your phone via Bluetooth to make and receive calls directly from your wrist. The integrated AI voice assistant allows for hands-free control and quick information retrieval.
- Smart Calls: Answer or dial calls using the watch, synchronizing with your phone's address book.
- AI Voice: Activate the voice assistant to ask questions or issue commands (e.g., "What's the weather today?").


Health Monitoring
Monitor your well-being with the R30Pro's health tracking features:
- Heart Rate Monitor: Real-time monitoring of your heart rate during exercise and throughout the day.
- Blood Oxygen (SpO2) Monitor: Track your blood oxygen levels to better understand your body's oxygenation.
- Sleep Monitor: Evaluate the quality of your sleep by tracking sleep stages and duration.
- Stress Monitor: Monitor your emotional stress levels and use breathing exercises to relax.


Sports Modes and Activity Tracking
The watch supports over 100 sports modes and tracks your daily activity.
- Activity Tracking: Records steps, distance, and calories burned.
- Sports Modes: Includes outdoor running, cycling, jumping rope, badminton, table tennis, tennis, volleyball, hiking, walking, basketball, soccer, baseball, cricket, hockey, rugby, dancing, yoga, dynamic cycling, sit-ups, indoor running, gymnastics, rowing, open and close jumping, and many more.


Notifications and Other Functions
Stay connected and organized with smart notifications and useful tools.
- Message Reminders: Synchronize phone messages and notifications. The watch can display up to 10 messages, each limited to 76 characters.
- Weather Forecast: Check current weather conditions directly on your wrist.
- Music Control: Control music playback on your smartphone (play, pause, skip tracks).
- Alarm Clock: Set alarms to wake you up or remind you of important events.
- Breathe Training: Guided breathing exercises for relaxation.
- Menstrual Cycle Tracking: Women's health tips and cycle tracking.
- Stopwatch, Timer, Countdown: Essential timing tools.
- Sedentary Reminder: Get alerts to move after periods of inactivity.
- Calculator: A basic calculator for quick computations.
- Find Phone: Locate your misplaced phone by triggering an alert from your watch.
- Games: Enjoy simple games on your watch during leisure time.





5.3. Watch Settings
Access the watch settings to customize various aspects of your device:
- Display: Adjust brightness, set screen-off time, change dial, select menu view style, and enable/disable wrist-to-wake.
- Vibrate & Ring: Configure notification alerts to vibrate only, vibrate & ring, or mute.
- DND Mode (Do Not Disturb): Enable to disable message and incoming call notifications.
- Low Power Mode: Activates power saving by disabling vibration, wrist-to-wake, and reducing screen brightness.
- Phone: Enable or disable the ability to answer calls on the watch.
- Phone Reset: Resets watch call settings, including deleting call logs and contacts.
- System: Options to restart the watch, shut down, or perform a factory reset (Warning: Factory reset will delete all data and settings).
- About: View device information such as device name, Bluetooth name, and software version. Includes a QR code for app download.
6. Maintenance
6.1. Cleaning
To maintain your watch's performance and appearance:
- If your watch gets wet, clean and dry it thoroughly before putting it back on your wrist.
- Regularly wipe the watch and strap with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials for cleaning.
6.2. Watchband Replacement
To disassemble or assemble the watchband:
- Locate the pin button on the watchband.
- Rotate the pin button to release the strap.
- Lift the watchband to remove it.
- To attach a new watchband, reverse the steps, ensuring the pin button clicks securely into place.

6.3. Water Resistance
The IOWODO R30Pro Smart Watch is rated for Life Waterproof (10M). This means it is resistant to splashes, rain, and brief immersion in shallow water. It is not suitable for hot showers, diving, or high-speed water sports. Always ensure the watch is dry before wearing it after contact with water.
7. Troubleshooting
If you encounter issues with your IOWODO R30Pro Smart Watch, try the following solutions:
- Connection Issues: Ensure your phone and watch are within 10 meters of each other. If disconnected, refresh the Da Fit app interface manually.
- Notifications Not Working: Verify that the watch is connected to the Da Fit app, the app is running on your phone, and "Notification Alerts" is enabled in the app settings.
- Watch Not Turning On: Ensure the watch is fully charged. Connect it to the magnetic charging cable and check for the charging indicator.
- Data Sync Issues: Check your Bluetooth connection and ensure the Da Fit app is open and running. Try restarting both your phone and watch.
- Screen Unresponsive: Perform a short press on the Power Button to wake the screen. If unresponsive, try restarting the watch via the System settings.
- Persistent Issues: If problems persist, consider performing a factory reset via the System settings. Be aware that this will erase all data and settings on your watch.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | IOWODO |
| Model | R30Pro |
| Display Size | 1.85 inch |
| Resolution | 240*284 |
| Screen Material | TFT, Coated Glass |
| CPU Model | Realtek8763EWE |
| Battery Capacity | 280 mAh |
| Battery Life | 5-6 days (typical usage) |
| Charging Time | 2 hours |
| Charging Voltage | 5V |
| Bluetooth Version | BLE5.2 |
| Waterproof Grade | Life Waterproof (10M) |
| Band Width | 20mm |
| Band Length | 200mm |
| Weight | 26g |
| Case Material | Alloy |
| Band Material | Silica Gel |
| Compatibility | All Compatible (Android Wear System) |
| App Name | Da Fit |
| Voice Assistant | Yes |
| Touch Screen | Yes |
| Multiple Dials | Yes |
| GPS | No |
| SIM Card | No |
| WIFI | No |
| RAM | 160KB |
| ROM | 384KB |
| Operating Temperature | -10℃ to 40℃ |
| Certification | CE, FCC, RoHS |
| Supported Languages | English, Russian, Spanish, Portuguese, Turkish, Italian, French, German, Hebrew, Arabic, Indonesian, Malay, Thai, Chinese, Bulgarian |

9. User Tips
- For consistent notifications and data synchronization, ensure the Da Fit app is running in the background on your smartphone.
- Adjust the watch strap for a snug but comfortable fit to ensure accurate heart rate and SpO2 readings.
- Regularly check the Da Fit app for software updates to ensure optimal performance and access to new features.
- To maximize battery life, consider enabling the 'Low Power Mode' when not actively using advanced features.
10. Warranty and Support
For detailed warranty information, customer support, and additional resources, please refer to the full user manual available as a PDF: