JUNCTEK KM110F

Contents

JUNCTEK KM110F WiFi Battery Coulometer

Model: KM110F

High-Precision Bidirectional Current Detection for RV & EV

Introduction

The JUNCTEK KM110F WiFi Battery Coulometer is a high-precision instrument designed to accurately track battery levels, voltage, current, and power. It features remote monitoring via WiFi, making it ideal for RVs, EVs, and various other applications. Crafted with a decade of expertise, this device provides comprehensive battery management at your fingertips.

JUNCTEK KM110F Coulometer display, 100A sampler, 5m communication cable, and 1m red positive electrode wire.
The KM110F Coulometer package includes the display, 100A sampler, communication cable, and positive electrode wire.
Diagram showing various battery types and applications compatible with the KM-F series coulometer, including bicycles, RVs, EVs, solar setups, and home electricity storage.
The KM-F series coulometer is compatible with multiple battery types, including lead-acid, ternary lithium, and lithium iron phosphate batteries, for various applications.

What's in the Box

Please check the contents of your package against the following list:

  • Display Module * 1
  • 5m Communication Cable * 1
  • 1m Red Positive Electrode Wire * 1
  • Quick Guide * 1
  • Sampler * 1 (e.g., 100A Sampler for KM110F)
Shipping list for the WiFi Battery Coulometer, showing the display, 5m communication cable, 1m red positive wire, quick guide, and sampler.
Contents of the KM110F WiFi Battery Coulometer package.

Setup Instructions

1. Wiring Diagram

Follow the wiring diagram carefully to ensure correct installation and operation. The product images use the KM140F as an example, but the principle is the same for the KM110F.

Wiring diagram for the KM-F series coulometer, showing connections between the display, sampler, battery, charger, and load.
Typical wiring diagram for the KM-F series coulometer.
  1. Connect the display module to the sampler using the provided 5m communication cable.
  2. Connect the sampler to the battery's negative terminal (BATT-).
  3. Connect the load and charger to the sampler's designated terminals (LOAD- and Charger).
  4. Ensure the positive voltage input (V+) is connected correctly.

2. Mounting

The display module is designed for easy integration. Refer to the dimensions below for proper cutout and mounting.

Dimensions of the display module and its mounting cutout, showing 100mm width, 67.8mm height, and a cutout of 85.1mm by 58.1mm.
Display module mounting cutout dimensions: 85.1mm * 58.1mm. Manual measurements may have errors; refer to the actual product.

Operating Instructions

1. Power On and Initial Display

Once correctly wired, the coulometer display will power on. It will show real-time data such as voltage, current, power, capacity percentage, and charging/discharging status.

Product demonstration video showing the KM-F series WiFi Battery Coulometer in operation, displaying battery levels, voltage, and current.

2. Automatic Current Direction Detection

The device automatically identifies and monitors current in both charging and discharging directions. When charging and discharging occur simultaneously, the displayed value is the difference between the charging current and the discharging current.

Display showing automatic current direction detection, with 'DIS' for discharging and 'CHG +' for charging, along with voltage, current, power, and battery percentage.
The coulometer automatically detects and displays charging (CHG+) and discharging (DIS) status.

3. Mobile App Control & Remote Monitoring

The KM110F supports remote real-time monitoring via a mobile app. You can connect via Bluetooth, WiFi, or remote connection to view key data and configure settings.

  • All-New Design: The redesigned app interface offers an aesthetically pleasing and feature-rich experience, including dynamic charging effects.
  • Comprehensive Display: View battery voltage, charge/discharge current, power, remaining capacity, and estimated time.
  • Comprehensive Settings: Configure the coulometer through the app, from interface style adjustments to complex data analysis and parameter settings.
  • Intelligent Platform: The Junce Home intelligent instrument platform provides stable and reliable services, offering an intelligent experience combined with mobile app control.
Image showing the KM110F coulometer display and a smartphone app interface for remote real-time monitoring via WiFi, with battery status and control options.
Remote real-time monitoring and complete control via the mobile app.

4. Screen Inversion Function

For outdoor usage or bright light conditions, the screen inversion function allows you to manually adjust the display to a white background for clear visibility.

Two display modes: Dark Mode and Light Mode, showing the coulometer screen with different background colors for readability.
Switch between Dark Mode and Light Mode for optimal viewing.

5. Intelligent Alarm

The built-in buzzer provides intelligent monitoring. If a preset low capacity or low voltage alarm is triggered, the buzzer will sound, and a popup reminder will appear on the display, keeping you informed of the device status.

Intelligent alarm feature showing 'Low cap. warning' and 'Low volt. warning' pop-ups on the coulometer display.
Intelligent alarms for low capacity and low voltage.

Maintenance

The KM110F Coulometer is designed for durability and requires minimal maintenance. To ensure longevity and accurate readings:

  • Keep the display and sampler clean and free from dust and moisture.
  • Ensure all cable connections are secure and free from corrosion.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • The built-in storage chip ensures that parameters are not lost during power outages, so no special action is needed in such events.

Troubleshooting

  • No Data Displayed: Check all cable connections between the display and the sampler, and the sampler to the battery. Ensure the device is powered on.
  • Inaccurate Readings: Verify the sampler model matches your current range (KM110F uses a 100A sampler, which actually uses a 200A shunt). Ensure proper wiring according to the diagram. Refer to the Quick Guide for calibration steps if necessary.
  • No Remote Connection: Ensure WiFi is enabled on the coulometer and your mobile device. Check network connectivity. Ensure the app is updated to the latest version.
  • Low Capacity/Voltage Alarm: This indicates the battery has reached a preset low threshold. Recharge the battery immediately. Check battery health if alarms persist after charging.

Specifications

FeatureKM105FKM110FKM140FKM160F
Sampling MethodShunt
Voltage Measurement Range10-100V
Voltage Resolution0.01V
Current Measurement Range0-50A0-100A0-400A0-600A
Current Resolution0.001A0.01A
Capacity Display Range0%-100%
Power Measurement Range0-5KW0-10KW0-40KW0-60KW
Power Resolution0.0001W
Ampere-Hour Measurement Range0-9999.9Ah
Capacity Resolution0.001Ah
Bluetooth Connection DistanceMaximum 10 meters in an open area
WiFi Connection DistanceMaximum 10 meters in an open area
Remote Connection DistanceGlobal
Voltage Accuracy±5‰+0.02V
Current Accuracy±2‰+0.002A±1%+0.1A
Sampling Rate5 times per second
Display Power Consumption0.9W
Screen Auto-off Time10S, 20S, 30S, 40S, 50S, 60S, AUTO10S, 20S, 30S, 40S, 50S, 60S, AUTO
Screen lights up when discharge current (I) ≥15mA; screen turns off when I <15mA and time >20sScreen lights up when discharge current (I) ≥30mA; screen turns off when I <30mA and time >20s
Table of product specifications for KM105F, KM110F, KM140F, and KM160F models, detailing sampling method, voltage/current measurement ranges and resolutions, capacity display, power measurement, ampere-hour range, connection distances, accuracies, sampling rate, and screen auto-off times.
Detailed specifications for the KM-F series coulometers.

User Tips

  • For optimal outdoor visibility, utilize the screen inversion function to switch to a white background.
  • Regularly check the mobile app for comprehensive data analysis and parameter adjustments.
  • Ensure the correct sampler (e.g., 100A for KM110F) is used for accurate current measurements. The KM110F sampler actually uses a 200A shunt, measuring 0-100A current.
  • The pure copper shunt and screws offer excellent conductivity and low self-power consumption, ensuring minimal battery drain in standby mode.
Close-up of the pure copper screw shunt and exquisite sampler housing, highlighting pure copper construction for precise measurement.
The pure copper construction of the shunt ensures precise and efficient measurement.

Warranty and Support

The JUNCTEK KM110F WiFi Battery Coulometer is certified by authoritative organizations (CE, FCC, PSE), ensuring quality and reliability.

Certifications and quality assurance documents for JUNCTEK products, including CE, FCC, and PSE.
The product is certified by authoritative organizations.

For warranty information, technical support, or any inquiries, please contact the JUNCTEK Official Store directly. Refer to the included Quick Guide for additional details and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.