JUNCTEK KM-F Series

Contents

JUNCTEK KM-F Series WiFi Coulomb Meter

Power Volt-Ammeter & Battery Capacity Indicator

Models: KM105F, KM110F, KM140F, KM160F

1. Introduction

The JUNCTEK KM-F Series WiFi Coulomb Meter is a sophisticated device designed for real-time monitoring of battery levels, voltage, current, power, and capacity. Crafted with a decade of expertise, this meter provides accurate measurements and global, on-the-go power management through its WiFi connectivity and mobile application. It is compatible with various battery types, including lead-acid, ternary lithium, and lithium iron phosphate batteries, as long as their voltage falls within the specified measurement range.

Key features include:

  • Real-time display and precise measurement of battery parameters.
  • Remote monitoring via WiFi and Bluetooth connectivity.
  • Intelligent alarm system for low capacity and low voltage.
  • Automatic current direction detection (charging/discharging).
  • Built-in storage chip to prevent data loss during power outages.
  • Screen inversion function for clear visibility in bright outdoor conditions.

Video: Product demonstration of the KM-F Series WiFi Coulomb Meter, showcasing its display and features.

2. Setup Guide

2.1. Package Contents

Upon unboxing, please verify that all components are present:

Shipping list for JUNCTEK KM-F Series WiFi Coulomb Meter

Image: Visual representation of the shipping list, including the display, communication cable, positive wire, quick guide, and sampler.

  • 1x Display Module
  • 1x Sampler (specific amperage depends on model: 50A, 100A, 400A, or 600A)
  • 1x 5-meter Communication Cable
  • 1x 1-meter Red Positive Electrode Wire
  • 1x Quick Guide

2.2. Physical Dimensions

Ensure adequate space for installation. Manual measurements may have slight errors; refer to the actual product for precise dimensions.

Dimensions of the display module

Image: Diagram showing the dimensions of the display module (93mm x 67.8mm, cutout 85.1mm x 58.1mm).

Display module mounting cutout dimensions: 85.1mm * 58.1mm.

Dimensions of various sampler modules (50A, 100A, 400A, 600A)

Image: Diagrams illustrating the dimensions for the 50A, 100A, 400A, and 600A sampler modules.

2.3. Wiring Diagram

Proper wiring is crucial for accurate operation and safety. The following diagram illustrates the connection for the KM-F series, using the KM140F as an example. Ensure all connections are secure.

Wiring diagram for JUNCTEK KM-F Series Coulomb Meter, showing connections between display, sampler, battery, charger, and load.

Image: Detailed wiring diagram for the KM-F series, demonstrating how to connect the display, sampler, battery, charger, and load. Note: Product images use the KM140F as an example.

2.4. Battery Compatibility

The KM-F series is compatible with a wide range of batteries, including:

  • Lead-acid batteries
  • Ternary lithium batteries
  • Lithium iron phosphate batteries
  • Other types of batteries

Ensure the battery voltage is within the meter's specified measurement range (10-100V) for proper functionality.

Diagram showing various applications and battery types compatible with the KM-F series coulometer.

Image: Illustration of the KM-F series' compatibility with multiple battery types and applications such as bikes, RVs, solar setups, and electric scooters.

3. Operating Instructions

3.1. Real-Time Display

The display module provides comprehensive real-time data:

KM-F Series display showing real-time battery parameters like voltage, current, power, capacity percentage, and estimated time.

Image: The KM-F Series display interface, highlighting various real-time measurements including voltage, current, power, capacity percentage, remaining capacity, and estimated charging/discharging time.

  • Voltage (V): Current battery voltage.
  • Current (A): Current flowing into or out of the battery.
  • Power (W): Real-time power consumption or generation.
  • Capacity Percentage (%): Remaining battery capacity as a percentage.
  • Remaining Capacity (Ah): Remaining battery capacity in Ampere-hours.
  • Estimated Charging/Discharging Time: Predicted time until full charge or discharge.

The display automatically indicates charging (CHG +) or discharging (DIS -) status.

Display showing charging status with green battery icon and CHG+

Image: The display showing the battery in a charging state with a green battery icon and 'CHG +'.

Display showing discharging status with blue battery icon and DIS-

Image: The display showing the battery in a discharging state with a blue battery icon and 'DIS -'.

3.2. Mobile App Control & Remote Monitoring

The KM-F series supports remote real-time monitoring via a mobile application, connecting through WiFi or Bluetooth. This allows you to manage your battery situation from anywhere.

Remote real-time monitoring via WiFi, showing the coulometer display and a smartphone app interface.

Image: The KM-F series coulometer connected to a smartphone app for remote real-time monitoring via WiFi.

Mobile app interface for the coulometer, showing connection options and settings.

Image: The mobile app interface, demonstrating Bluetooth and WiFi connection options, and various settings.

The app offers:

  • All-New Design: A redesigned interface with dynamic charging effects for visual understanding of battery status.
  • Comprehensive Display: View key data like voltage, current, power, remaining capacity, and estimated time to make informed decisions.
  • Comprehensive Settings: Configure the coulometer fully, from interface style adjustments to complex data analysis and parameter settings.
  • Intelligent Platform: The 'Junce Home' platform provides stable and reliable intelligent instrument services, offering an intelligent experience with mobile app control.

3.3. Automatic Current Direction Detection

The device automatically identifies and monitors the current in both charging and discharging directions. When charging and discharging occur simultaneously, the displayed value represents the net difference between the charging and discharging currents.

Diagram illustrating automatic current direction detection, showing separate displays for discharging (A-) and charging (A+).

Image: Visual explanation of the automatic current direction detection feature, showing distinct displays for discharging (DIS -) and charging (CHG +).

3.4. Screen Inversion Function

For outdoor use, a screen inversion function is included. In bright light or direct sunlight, the screen can be manually adjusted to a white background to ensure the displayed content remains clearly visible.

Image showing two display modes: Dark Mode and Light Mode (screen inversion function).

Image: Comparison of Dark Mode and Light Mode, demonstrating the screen inversion function for improved readability.

4. Maintenance

4.1. General Care

  • Keep the device clean and free from dust and moisture.
  • Avoid exposing the device to extreme temperatures or direct impact.
  • Do not attempt to disassemble the display module or sampler, as this may void the warranty.

4.2. Shunt and Sampler Housing

The shunt and its screws are made of pure copper, offering excellent conductivity, low heat generation, and minimal self-power consumption. The sampler housing is designed for easy installation and safe usage.

Internal view of the sampler highlighting pure copper screw shunt components.

Image: Close-up view of the sampler's internal components, emphasizing the pure copper screw shunt for precise measurement.

5. Troubleshooting

5.1. Intelligent Alarms

The device features intelligent alarms for low capacity and low voltage. When a preset alarm is triggered, the buzzer will sound, and a popup reminder will appear on the display. This helps prevent accidents and keeps you informed of the battery status.

Display showing intelligent alarm messages for low capacity and low voltage.

Image: The display showing 'Low cap. warning' and 'Low volt. warning' messages, indicating the intelligent alarm feature.

5.2. Common Issues & Solutions

  • No WiFi Readings / Connection Issues:
    Ensure your mobile device is within range (max 10 meters in open area) and connected to the correct WiFi network. Check the app settings for proper configuration. Verify the WiFi indicator on the coulometer display is active.
  • Inaccurate Readings (Current/Voltage):
    Double-check all wiring connections according to the wiring diagram. Ensure the shunt is correctly installed and the appropriate sampler model is used for your current range. If readings are consistently off, verify the battery type and voltage settings in the app.
  • Screen Beeps or Lights Up Randomly:
    This is likely due to the intelligent alarm system. Check the display for 'Low cap. warning' or 'Low volt. warning' messages. Adjust the alarm thresholds in the mobile app settings if necessary.
  • No Data Loss on Power Outage:
    The built-in storage chip ensures that parameters are not lost during power outages. When power is restored, the device will resume operation with its pre-outage settings.

6. Specifications

FeatureKM105FKM110FKM140FKM160F
Sampling MethodShunt
Voltage Measurement Range10-100V
Voltage Resolution0.01V
Current Measurement Range0-50A0-100A0-400A0-600A
Current Resolution0.001A0.01A
Capacity Display Range0%-100%
Power Measurement Range0-5KW0-10KW0-40KW0-60KW
Power Resolution0.0001W
Ampere-Hour Measurement Range0-9999.9Ah
Capacity Resolution0.001Ah
Bluetooth Connection DistanceMaximum 10 meters in an open area
WiFi Connection DistanceMaximum 10 meters in an open area
Remote Connection DistanceGlobal
Voltage Accuracy±5‰+0.02V
Current Accuracy±2‰+0.002A±1‰+0.1A
Sampling Rate5 times per second
Display Power Consumption0.9W
Screen Auto-off Time10S, 20S, 30S, 40S, 50S, 60S, AUTO
Screen lights up when discharge current (I) ≥15mA; screen turns off when I <15mA and time >20sScreen lights up when discharge current (I) ≥30mA; screen turns off when I <30mA and time >20s

Other Specifications:

  • Battery Included: No
  • DIY Supplies: Electrical
  • Origin: Mainland China
  • Certifications: CE, FCC

7. User Tips

  • Monitoring Charging/Discharging: The device automatically detects and displays the direction of current flow. If both charging and discharging occur simultaneously, the display will show the net current difference.
  • Connecting to Lithium Batteries: The KM-F series is compatible with various battery types, including lithium batteries. When connecting to a 300A lithium battery, ensure you select a sampler with an appropriate current range, such as the 400A or 600A model, to handle the capacity safely.
  • Smart Home Integration: While direct integration with specific smart home platforms like Home Assistant is not explicitly stated, the 'Junce Home intelligent instrument platform' and mobile app control suggest potential for advanced monitoring and control. Refer to the app's documentation or manufacturer's support for details on API access or integration capabilities.

8. Warranty and Support

The JUNCTEK KM-F Series WiFi Coulomb Meter is certified by authoritative organizations, including CE and FCC, ensuring its quality and compliance with safety standards.

Certifications for JUNCTEK products, including CE and FCC.

Image: Display of various certifications, including CE and FCC, for JUNCTEK products.

For any technical support, warranty claims, or further inquiries, please contact the manufacturer directly. Refer to the contact information provided in the Quick Guide included with your product.

8.1. Disclaimer

⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.