1. Product Overview
The New Bee SH82 is a versatile Bluetooth 5.2 headband designed for both sleep and sports activities. It integrates HIFI music playback with the comfort of a soft, breathable headband that can also function as an eye mask. Featuring a long-lasting battery and easy-to-use controls, it provides a seamless audio experience.
2. Package Contents
- New Bee SH82 Sleep Headphones Bluetooth Headband
- Charging Cable
- User Manual (this document)
3. Specifications
| Feature | Specification |
|---|---|
| Model | SH82 |
| Bluetooth Version | 5.2 |
| Wireless Range | Up to 15 meters (49 feet) |
| Battery Capacity | 200mAh rechargeable lithium battery |
| Charging Time | Approximately 2 hours |
| Music Playtime | Up to 26 hours |
| Speaker Size | 30mm composite driver |
| Material | 95% Polyester, 5% Spandex (Headband) |
| Microphone | Built-in |
| Volume Control | Yes |
| Control Buttons | Yes |
| Sound Isolation | No |
| Active Noise Cancellation | No |
| Voice Assistant | No |
| Waterproof | No |
| Certification | CE |
4. Setup and Pairing
4.1 Charging the Headband
- Locate the charging port on the headband (usually near the control panel).
- Connect the provided charging cable to the headband and a USB power source (e.g., computer, wall adapter).
- The indicator light will show charging status (e.g., red for charging, blue/off when fully charged).
- A full charge takes approximately 2 hours and provides up to 26 hours of music playtime.
4.2 Bluetooth Pairing
- Power On: Long press the power button on the control panel for 3 seconds until the indicator light flashes (usually blue/red alternately), indicating it's in pairing mode.
- Enable Bluetooth: On your device (smartphone, tablet, laptop), go to the Bluetooth settings and ensure Bluetooth is turned on.
- Select Device: Look for 'SH82' or 'New Bee SH82' in the list of available devices and select it to connect.
- Confirmation: Once successfully paired, the indicator light on the headband will stop flashing and may turn solid blue or turn off, and you will hear an audible confirmation.
- Automatic Reconnection: The headband will automatically attempt to reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.
5. Operating Instructions
The control panel is located in the center of the headband for easy access.
5.1 Basic Functions
- Power On: Long press the power button for 3 seconds.
- Power Off: Long press the power button for 5 seconds. The headset will also auto power off when charging.
- Play/Pause Music: Click the power button.
- Volume Up: Click the volume up (+) button.
- Volume Down: Click the volume down (-) button.
- Next Song: Long press the volume up (+) button for 1 second.
- Previous Song: Long press the volume down (-) button for 1 second.
5.2 Call Functions
- Answer Call: Click the power button when a call comes in.
- End Call: Click the power button during a call.
- Reject Call: Long press the power button for 2 seconds when a call comes in.
6. Maintenance and Care
6.1 Cleaning
The headband features a washable design. To clean:
- Carefully remove the electronic components (speakers and control panel) from the fabric headband.
- Hand wash the fabric headband with mild soap and water.
- Allow the headband to air dry completely before reinserting the electronic components.
- Do NOT wash the electronic components.
6.2 Storage
- Store the headband in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the headband to prevent damage to the speakers or control panel.
7. Troubleshooting
- Cannot Power On: Ensure the headband is fully charged. Connect it to a power source and try again after a few minutes.
- Cannot Pair with Device:
- Make sure the headband is in pairing mode (indicator light flashing).
- Ensure Bluetooth is enabled on your device.
- Move the headband closer to your device (within 1 meter).
- Turn off and on Bluetooth on your device, then try searching again.
- If previously paired, try 'forgetting' the device in your Bluetooth settings and re-pairing.
- No Sound/Low Volume:
- Check the volume level on both the headband and your connected device.
- Ensure the headband is properly connected to your device.
- Verify that the audio output on your device is set to the Bluetooth headband.
- Intermittent Connection:
- Ensure you are within the 15-meter Bluetooth range.
- Avoid obstacles between the headband and your device that might interfere with the signal.
- Minimize interference from other wireless devices.
8. User Tips
- Versatile Use: This headband is ideal for various activities including sleeping, running, yoga, and general fitness. Its design keeps sweat and hair out of your eyes during workouts.
- Comfort for Sleep: The soft, breathable material and adjustable elasticity make it comfortable for extended wear, even as an eye mask for light blocking.
- Optimal Sound: For the best audio experience, ensure the speakers are positioned directly over your ears. The 30mm drivers are designed to deliver clear sound.
- Battery Management: To prolong battery life, fully charge the headband before first use and avoid completely draining the battery frequently.
9. Warranty and Support
For any issues or questions regarding your New Bee SH82 Sleep Headphones, please contact the seller or manufacturer's customer support. Refer to your purchase documentation for specific warranty terms and contact information.
