XHDATA D-220 Vintage Retro Radio Instruction Manual

1. Introduction

Thank you for purchasing the XHDATA D-220 Portable AM/FM/SW Radio. This high-performance global band radio features DSP digital technology for stable reception and clear sound. Its compact and retro design makes it easy to carry and operate, suitable for various environments.

2. Safety Information

• Always follow battery polarity instructions when installing AA battery (UM3AA) to prevent damage.
• If the sound becomes low, distorted, or intermittent, the battery voltage is low. Replace with new batteries. Do not mix old and new batteries.
• Remove batteries if the radio will not be used for an extended period to prevent leakage and damage.
• Avoid using the radio during thunderstorms to prevent potential hazards.

3. Package Contents

Upon opening your XHDATA D-220 package, you should find the following items:

• 1 x XHDATA D-220 Radio
• 1 x User Manual

4. Product Overview

The XHDATA D-220 radio features a user-friendly design with clearly labeled controls.

Function Introduction:

1. Band Switch: Used to select the desired frequency band (FM1-2/MW/SW).
2. Headphone Jack: For private listening with 3.5mm headphones.
3. Telescopic Antenna: Extendable antenna for improved FM and SW reception.
4. Band Knob (Tuning): Used to tune into radio stations.
5. Volume Switch (On/Off): Controls power and adjusts volume.
6. Power Indicator: Light to show when the radio is on.
7. Built-in Bracket: For stable placement on surfaces.

5. Setup

Battery Installation:

The XHDATA D-220 is powered by two UM3 AA 1.5V batteries (not included).

1. Locate the battery compartment on the back of the radio.
2. Open the battery compartment cover.
3. Insert two AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. Close the battery compartment cover securely.

6. Operating Instructions

6.1. Power On/Off and Volume Adjustment:

• To turn on the radio, push the VOLUME switch clockwise until you hear a "click" sound. The power indicator light will illuminate.
• To turn off the radio, push the VOLUME switch counter-clockwise until you hear a "click" sound. The power indicator light will turn off.
• Adjust the radio volume by rotating the VOLUME switch.

6.2. Band Selection:

• Use the Band Switch (Function 1) to select your desired frequency band: FM1, FM2, MW, or SW.

6.3. Antenna Usage:

• For FM1-2 and SW bands, fully extend the telescopic antenna (Function 3). Rotate the radio 360° to find the clearest and loudest reception.
• For MW band, the radio uses a built-in magnetic rod antenna. Rotate the entire radio 360° to optimize reception.

6.4. Tuning to Stations:

• Rotate the TUNING knob (Function 4) back and forth to select the station you wish to listen to.
• Tune slowly to avoid missing stations.

7. User Tips

• Reception: The radio generally offers good reception for local stations. For distant stations, especially on SW, some noise might be present. Experiment with antenna positioning and radio orientation for best results.
• Portability: Its lightweight and small design makes it ideal for outdoor activities like hiking or camping, providing entertainment without being cumbersome.
• Battery Life: Always carry spare AA batteries, especially during extended outdoor use, as the radio is battery-operated.

8. Maintenance

• Clean the radio with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Keep the radio away from extreme temperatures, direct sunlight, and high humidity.
• Ensure the telescopic antenna is fully retracted when not in use to prevent damage.

9. Troubleshooting

• No Power / No Sound:
  • Check if the VOLUME switch is turned on.
  • Ensure batteries are installed correctly with the right polarity.
  • Replace batteries if they are old or depleted.
• Poor Reception / Static:
  • Extend the telescopic antenna fully for FM/SW bands.
  • Rotate the radio 360° to find a better signal, especially for MW.
  • Move away from electronic devices that might cause interference.

10. Specifications

11. Warranty and Support

XHDATA offers the following after-sales policy for quality issues:

• Within one month of receipt: If any quality issues arise, the product will be promptly replaced with a new unit or a full refund will be provided.
• Between the second and third month after receipt: A replacement radio will be offered, but the customer will bear the shipping cost for returning the faulty item.
• Between three and twelve months after receipt: Free repair services will be provided. However, the customer will be responsible for the shipping cost of sending the radio for repair.

For any questions regarding after-sales service, please consult customer service:

• Email: xhdatacn@gmail.com
• Whatsapp: +86 18025193267
• Website: https://www.xhdata.com.cn
• Skype: radiwow

12. Frequently Asked Questions (FAQ)

Q: Can the MW band switch between 9K and 10K tuning steps?

A: Yes, the specifications indicate support for both 520-1730KHz (10K) and 522-1728KHz (9K) for the MW band, implying it can be switched.