OPUYYM DP-BTG

Contents

OPUYYM 7.83Hz Schumann Waves Resonance Generator Instruction Manual

Model: DP-BTG

1. Introduction

The Schumann Wave Resonance Generator is designed to produce ultralow frequency pulse audio signals, primarily the 7.83Hz Schumann wave. This device aims to influence the space environment, promoting physical and mental relaxation, enhancing the perception of sound and images, and improving overall well-being and work efficiency.

This adjustable version not only outputs the default 7.83Hz Schumann wave but also allows for frequency adjustment within a broad range of 0.01Hz to 100,000Hz (100KHz) pure sine wave.

Schumann Wave Generator with included speaker and cables

Figure 1: Schumann Wave Resonance Generator with accessories.

2. Product Overview and Components

Familiarize yourself with the various parts of your Schumann Wave Generator:

Labeled diagram of Schumann Wave Generator components

Figure 2: Labeled diagram of the Schumann Wave Generator.

  • Ultra-long Schumann wave signal transmitting antenna (double-sided): The primary component for signal emission.
  • LCD1602 display screen: Shows current frequency and input prompts.
  • Type-C 5V Power interface: For connecting the power supply.
  • Output signal indicator light: Indicates signal output status (can be turned off).
  • Signal test interface: For connecting an oscilloscope probe to measure the signal (GND/SIN port).
  • 3.5MM audio output port: For connecting to a signal amplifier or other audio devices.
  • Frequency Adjustment Keyboard: Numeric keypad for entering desired frequencies.
  • Backlight button: Controls the LCD backlight and output signal indicator.
  • SET button: Used to re-enter frequency values or save power-off parameters.

3. Setup

  1. Power Connection: Connect the provided Type-C cable to the Type-C 5V Power interface on the generator and to a suitable 5V DC power source (e.g., a USB wall adapter, computer USB port). The device supports Type-C to Type-C power supply.
  2. Initial Power-On: Upon connecting power, the LCD screen will light up and display the default frequency of 7.83Hz.
  3. Connecting Audio Devices (Optional): If you wish to amplify the signal or connect to an external audio system, use a 3.5mm audio cable to connect the generator's 3.5MM audio output port to your amplifier or audio input device.

Video 1: Demonstrates power connection, default frequency display, frequency input, and backlight control.

4. Operating Instructions

4.1. Adjusting Output Frequency

  1. Press the 'SET' button once. The LCD will display "Input(Hz):".
  2. Use the numeric keypad (0-9 and '.') to enter your desired frequency value. For example, to set 7.83Hz, press '7', '.', '8', '3'.
  3. Press the 'OK' button to confirm your input. The LCD will then display the new output frequency.
  4. If an incorrect value is entered, press the 'SET' button again to re-enter.

4.2. Saving Parameters

By default, parameters are NOT saved when power is turned off. To save your current frequency setting for future power-ons:

  • Press and hold the 'SET' button until the LCD displays "Data Save ON". This indicates that the current settings have been saved.

4.3. Controlling Backlight and Output Indicator

  • LCD Backlight: Short press the 'BACKLIGHT' button to turn the LCD backlight ON or OFF.
  • Output Signal Indicator (PWR LED): Long press the 'BACKLIGHT' button to turn the output signal indicator ON or OFF.

4.4. Verifying Output Waveform

To verify the output waveform, connect an oscilloscope probe to the 'GND/SIN' port (Signal test interface). You should observe a pure sine wave.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the acrylic shell and LCD screen. Avoid using abrasive cleaners or solvents that could damage the surface.
  • Storage: Store the device in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Handling: Handle the device with care to prevent physical damage to the circuit board or acrylic casing.

6. Troubleshooting

Here are some common issues and their solutions:

Troubleshooting Q&A from product image

Figure 3: Common Questions and Answers.

  • Q1: How to change the output frequency?
    A1: Press the "0-9" and '.' buttons to enter the value, and press the OK button to confirm. If the input is wrong, press the SET button to re-enter. For example, press [7][.][8][3], then press [OK], you can set to 7.83Hz. The default power-on output is 7.83Hz, and the setting range is 0.01~100KHz.
  • Q2: Need to save parameters even after power off?
    A2: Please press and hold the "SET" button until the LCD displays "Data Save ON".
  • Q3: How to verify the output waveform?
    A3: Please use an oscilloscope to measure the "GND/SIN" port. You can see a pure sine wave.
  • Q4: How to turn off the LCD backlight?
    A4: Short press the "BACKLIGHT" button to turn off the LCD backlight; short press the "BACKLIGHT" button again to turn on the LCD backlight.
  • Q5: How to turn off the output signal indication (PWR LED)?
    A5: Long press the "BACKLIGHT" button to turn off the output signal indication; long press the "BACKLIGHT" button again to turn on the output signal indication.
  • Q6: LCD does not display correctly after power on?
    A6: Please press the RES button briefly and power on again.

7. Specifications

ParameterValue
Product NameSchumann Wave Generator
ModelDP-BTG
Working VoltageDC 5V (DC 4-15V)
Working Current9-14mA
Power InterfaceType-C
Default Frequency7.83Hz
Adjustment Range0.01Hz ~ 100,000Hz (Pure Sine Wave)
Signal Voltage Amplitude3V
Audio Output3.5MM Jack
Shell MaterialAcrylic
Dimensions (L x W x H)15.4 cm (6.60 in) x 10.5 cm (4.13 in) x 2.5 cm (0.98 in)
Dimensions of the Schumann Wave Generator

Figure 4: Device dimensions.

8. User Tips

  • Audio Output Considerations: The device outputs a fixed 3V amplitude signal via the 3.5mm jack and does not have a built-in volume control. When connecting to headphones or sensitive audio equipment, ensure you use an external amplifier with volume control or adjust the input sensitivity of your audio device to prevent discomfort or damage.
  • Frequency Applications: This manual provides operational instructions for the device. For specific applications of different frequencies (e.g., for meditation, relaxation, or other purposes), please consult relevant external resources. This device is a signal generator and does not provide therapeutic advice or specific frequency protocols.
  • Power Supply: While the device operates on 5V DC, ensure your power adapter provides stable power to avoid any operational inconsistencies.

9. Warranty and Support

For any technical assistance, warranty claims, or operational questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase records for reference.

© 2024 OPUYYM. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.