PowMr POW-LVM3.6M-24V

Contents

PowMr 3.6KW Hybrid Solar Inverter

Model: POW-LVM3.6M-24V

User Instruction Manual

1. Introduction and Overview

The PowMr POW-LVM3.6M-24V is a multi-function hybrid solar inverter/charger designed to provide uninterruptible power support. It integrates the functions of a power inverter, a solar charger, and a battery charger into a single, portable unit. This device is capable of handling both solar and AC power sources for efficient battery charging and load powering. It features a comprehensive LCD display for user-configurable settings, allowing adjustments for battery charging current, AC/solar charger priority, and acceptable input voltage based on specific application needs.

This inverter supports a maximum PV array power of 4200W with a wide MPPT voltage range of 60-500VDC. It also supports a 120V AC input from either the grid or a generator and is compatible with various 24V lithium or lead-acid batteries. The unit offers a maximum charging current of up to 120A and provides a pure sine wave AC output with selectable frequencies of 50Hz or 60Hz, along with dual AC outputs for flexible power distribution.

Video 1: Unboxing and Product Overview

2. Safety Information

Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.

  • **Qualified Personnel:** Installation and maintenance should only be performed by qualified personnel.
  • **Grounding:** Ensure the inverter is properly grounded to prevent electric shock. Connect the PE protective conductor ground first.
  • **Battery Connection:** Always connect the battery before connecting solar panels or AC input. Ensure correct polarity.
  • **Ventilation:** Install the inverter in a well-ventilated area to prevent overheating.
  • **Overload Protection:** Do not exceed the rated output power of the inverter.
  • **Environmental Conditions:** Avoid exposure to water, high humidity, direct sunlight, and extreme temperatures.
  • **Disconnect Power:** Before performing any maintenance or wiring, disconnect all power sources (AC, PV, and Battery).

3. Package Contents

Upon receiving your PowMr Hybrid Solar Inverter, please verify that all items are included and undamaged:

  • 1 x PowMr 3.6KW Hybrid Solar Inverter (POW-LVM3.6M-24V)
  • 1 x User Manual
  • (Optional) WiFi Module (if purchased separately)

4. Features

  • Pure sine wave output for sensitive electronics.
  • User-configurable input voltage range for various applications (home appliances, personal computers).
  • Adjustable battery charging current via LCD settings.
  • Configurable AC/Solar Charger priority.
  • Compatible with utility mains voltage or generator power.
  • Automatic restart function upon AC recovery.
  • Built-in protections: Overload, Over temperature, Short circuit, Charge low/high temperature, Charging overcurrent, Charging undervoltage, Solar panel reverse connection, Battery overvoltage.
  • Smart battery charger design for optimized battery performance.
  • Cold start function.
  • Supports batteryless mode, powering loads directly from PV/AC.
  • Remote monitoring and control via the "SMARTESS" App (requires optional WiFi module).
  • Dual AC outputs for flexible load management.

5. Specifications

ParameterValue
Model NumberPOW-LVM3.6M-24V
Rated Output Power3.6KVA/3.6KW
Output Power1 - 200 KW
Battery Voltage24VDC
Battery TypeLead-acid battery and lithium battery (Lifepo4, Lithium, Flooded, Gel, Lead-acid Batteries)
Nominal Input Voltage110/105/110/115/120VAC
Nominal Input Frequency50Hz / 60Hz (Auto detection)
Efficiency>95% (Rated R load, battery full charged)
Output Voltage WaveformPure Sine Wave
Floating Charging Voltage27VDC
Charging Algorithm3-Step
Max. PV Array Power4200W
Max. PV Current16A
Nominal PV Voltage240VDC
Start-up Voltage60VDC ± 10VDC
PV Array MPPT Voltage Range60VDC~500VDC
Max. PV Array Open Circuit Voltage500VDC
Max Charging Current120Amp (MPPT 120A)
Safety CertificationCE
Operating Temperature Range-10℃ to 55℃
Storage temperature-15℃~ 60℃
Humidity5% to 95% Relative Humidity (Non-condensing)
Dimension (D*W*H), mm423x334x110 mm
Net Weight9KG
Output TypeSINGLE
Is Smart DeviceYes
OriginMainland China
Applicable AreaAsia, Europe, Africa and North America (220-240VAC drivers)

Image 2: PowMr 3.6KW Hybrid Solar Inverter with key features and dimensions.

PowMr 3.6KW Hybrid Solar Inverter with key features and dimensions

6. Installation and Setup

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Refer to the detailed wiring diagram below and follow these guidelines:

6.1. Mounting the Inverter

  • Choose a suitable location that is well-ventilated, dry, and protected from direct sunlight and moisture.
  • Ensure the mounting surface can support the inverter's weight (9KG).
  • Allow sufficient clearance around the inverter for proper airflow and heat dissipation.

6.2. Wiring Connections

All wiring must comply with local electrical codes and regulations. Ensure all power sources are disconnected before making any connections.

  1. **Grounding:** Connect the PE (Protective Earth) protective conductor ground first to the designated ground screw on the inverter.
  2. **Battery Connection:**
    - Connect the 24V battery bank to the BATTERY terminals (+ and -) on the inverter.
    - Recommended battery capacity: 200AH.
    - Use 2AWG battery wire.
    - The battery must be connected for the system to operate correctly (unless in batteryless mode).
  3. **PV Input Connection:**
    - Connect your solar panel array to the PV IN terminals (+ and -).
    - Max. PV Input Power: ≤ 4200W.
    - Max. PV Input Current: ≤ 120A.
    - PV Array MPPT Volt Range: 60~500VDC.
    - Start-up Voltage: > 60V.
    - Use 12AWG PV wire.
    - Refer to the Solar Panel Specifications for PV module selection guidelines.
  4. **AC Input Connection (Grid or Generator):**
    - Connect the AC input source (utility grid or generator) to the AC IN (L, N) terminals.
    - AC Input Voltage: 100/105/110/115/120VAC.
    - Frequency: 50Hz / 60Hz.
    - Max AC Charge Current: 80A.
    - Use 12AWG AC wire.
  5. **AC Output Connection (Loads):**
    - Connect your main loads to the MAIN OUT (L, N) terminals.
    - Connect secondary loads (if applicable) to the SECOND OUT (L, N) terminals.
    - AC Output Power: ≤ 3600W.
    - AC Output Voltage: 120V±5%.
    - Surge Capacity: 7200W.
    - Maximum Main Load: 3600W.
    - Maximum Second Load (battery model): 1200W.

Image 3: Detailed Wiring Diagram for System Installation.

Detailed Wiring Diagram for PowMr Hybrid Solar Inverter System Installation

Image 4: Solar Panel Specifications and PV Module Selection Guidelines.

Solar Panel Specifications and PV Module Selection Guidelines

7. Operating Instructions

7.1. Initial Power-Up

  1. Ensure all wiring connections are secure and correct.
  2. Turn on the battery breaker (if applicable).
  3. Turn on the PV array breaker (if applicable).
  4. Turn on the AC input breaker (if applicable).
  5. Finally, turn on the inverter's power switch.

7.2. LCD Display and Settings

The comprehensive LCD display allows for user-configurable settings. Use the UP, DOWN, ESC, and ENTER buttons to navigate the menu and adjust parameters such as:

  • Battery charging current (Max 120A).
  • AC/Solar charger priority.
  • Acceptable input voltage range.
  • Output frequency (50Hz/60Hz).
  • Battery type (GEL, FLD, LI-ion, etc.).

7.3. Charging Modes

The inverter offers various charging modes to optimize energy usage:

  • **Solar First:** Solar energy is prioritized for charging the battery. Utility power will only charge the battery if solar energy is unavailable.
  • **Solar and Utility:** Both solar energy and utility power will charge the battery simultaneously.
  • **Only Solar Charging:** Solar energy will be the sole charging source, regardless of utility availability.

Image 5: Charging Modes for Energy Cost Reduction.

Charging Modes for Energy Cost Reduction

7.4. Batteryless Mode

This inverter supports a batteryless mode, allowing it to power loads directly from PV or AC sources without a connected battery. This can be useful in specific scenarios where battery storage is not required or desired.

Image 6: Batteryless Mode Operation.

Inverter supporting batteryless mode, powering loads from PV/AC without battery connected

7.5. Remote Monitoring (Optional)

With an optional WiFi module, you can monitor and control your inverter remotely via the "SMARTESS" App. Download the app from the App Store or Google Play and follow the instructions provided with the WiFi module for setup.

Image 7: Remote Monitoring via SMARTESS App.

Remote Monitoring and Control via the SMARTESS App with optional WiFi module

8. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • **Cleaning:** Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can impede cooling. Use a dry, soft cloth.
  • **Connection Checks:** Annually inspect all electrical connections (battery, PV, AC input/output) for tightness and corrosion. Tighten any loose connections.
  • **Battery Health:** Monitor battery voltage and performance. Ensure batteries are maintained according to their manufacturer's recommendations.
  • **Environmental Check:** Ensure the installation environment remains within the specified operating temperature and humidity ranges.
  • **Firmware Updates:** Check the manufacturer's website or app for any available firmware updates to ensure your inverter has the latest features and bug fixes.

9. Troubleshooting

If you encounter issues with your inverter, refer to the following basic troubleshooting steps. For more complex problems, consult the full user manual or contact customer support.

  • **No Power Output:**
    - Check if the inverter's power switch is ON.
    - Verify AC input power is present.
    - Check battery connections and voltage.
    - Ensure solar panels are producing power (if in solar mode).
  • **Overload Warning:**
    - Reduce the connected load.
    - Check for short circuits in the load wiring.
  • **Over Temperature Warning:**
    - Ensure adequate ventilation around the inverter.
    - Clean any dust or debris from the cooling vents.
    - Reduce ambient temperature if possible.
  • **Battery Charging Issues:**
    - Check battery connections and health.
    - Verify solar panel output.
    - Ensure AC input is present (if AC charging is enabled).
    - Check charging current settings on the LCD.
  • **Error Codes:** If an error code appears on the LCD, consult the detailed error code section in the complete user manual for specific diagnostic and resolution steps.

Image 8: Smart Protection System for various fault conditions.

Smart Protection System with multiple protection modes for the inverter

10. User Tips

  • **Optimize Charging:** Experiment with the different charging priority settings (Solar First, Solar and Utility, Only Solar Charging) to find the most efficient mode for your specific energy consumption patterns and solar availability.
  • **Battery Compatibility:** Ensure your 24V battery bank is compatible with the inverter's settings. Incorrect battery type settings can lead to inefficient charging or damage.
  • **Monitor Performance:** Regularly check the LCD display or the SMARTESS app (with WiFi module) to monitor system performance, battery status, and energy production. This helps in identifying potential issues early.

11. Warranty and Support

The PowMr 3.6KW Hybrid Solar Inverter (POW-LVM3.6M-24V) comes with a 1-year warranty from the date of purchase, covering manufacturing defects. This product is CE certified, indicating compliance with European health, safety, and environmental protection standards.

For technical support, warranty claims, or further assistance, please contact your retailer or the PowMr customer service department. Ensure you have your product model number and purchase details available when contacting support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.