Important Safety Information and Warnings
Please read all instructions carefully before installation and operation. Pay special attention to the following warnings and reminders:
- This device is designed for a 12V vehicle power supply system (grounding wire required). Do not install this device in a 24V vehicle, as it will cause damage.
- Do not attempt to repair the power fuse without professional guidance. Improper use of the fuse can damage the machine or cause a fire.
- To ensure safety and comply with traffic regulations, drivers must not watch videos or operate the machine while driving.
- For installation, disassembly, or repair, it is recommended to consult a car audio professional to avoid damage or accidents.
- Avoid placing this product in humid environments or near water to prevent electric shock or fire.
- Note: To prevent damage, do not power on the unit until the power cord is correctly connected!
- The product contains small parts. Keep out of reach of children to prevent swallowing.
Setup
Pre-Installation Test
Before full installation, perform a quick test to ensure the device is functioning correctly:
- Connect the red and yellow wires of the car stereo together, then connect them to the positive pole of a 12V battery.
- Connect the black wire to the negative pole of the battery.
- After 2 seconds, check the car stereo. If the screen lights up, the car stereo is functioning properly.
Installation Methods
There are three common methods for installing the unit. Choose the method that best suits your vehicle. You may also refer to the installation method of your original car radio.

Wiring Diagram
Note: The following diagrams are for reference only. Please refer to the actual product and consult a professional if needed.
1. Main Harness Connections

2. Back Interface Diagram
The rear panel of the unit features various ports for connectivity:
- Power Cable
- RCA Input/Output
- Canbus Serial Cable
- 2 USB Cables
- Camera Input
- Radio Antenna
- GPS Antenna

3. Rear View Camera Wiring (Optional)
Note: Whether you use a rear view camera or not, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals may be affected.

- Monitor: (Not included in the package)
- Camera Power Source: Connect the camera power cable.
- Reversing Trigger Line: Connect this wire to the reversing line in the power harness (e.g., Back (A6)).
- Red Wire: Connect to the positive pole of the reverse light cable.
- Black Wire: Connect to GND.
Operating Instructions
Icon Introduction
1. Machine-Host Controls
| Symbol | Operations & Controls |
|---|---|
| MIC | Built-in microphone hole |
| RST | Reset (press with a sharp object) |
| Power Button | Press and hold for 3 seconds to power off. Short press repeatedly to mute or unmute. |
| Home Icon | To main menu |
| Return Icon | Return to the previous interface |
| Volume Up Icon | Press or hold repeatedly to increase volume |
| Volume Down Icon | Press or hold repeatedly to decrease volume |
2. On-Screen Main Interface Icons
| Icon | Name | Operations |
|---|---|---|
| Main Menu Icon | Main menu | Touch to switch screen to main menu |
| Hide Shortcut Menu Icon | Hide shortcut menu | Touch to hide the shortcut menu button area |
| Backstage Icon | Backstage | Touch to show all programs running in the background |
| Return Icon | Return | Touch to switch screens to return to previous screen |
| Settings Icon | Setting | Touch to Enter Settings |
| Application Icon | Application | Touch to Enter More App Interface |
| Navigation Icon | Navigation | Touch to Enter Navigation |
3. On-Screen Drop-Down List Icons
| Icon | Name | Operations |
|---|---|---|
| Wi-Fi Icon | Wi-Fi | Turn on/off Wi-Fi |
| Bluetooth Icon | Bluetooth | Turn on/off Bluetooth |
| Screen Off Icon | Screen off | Open/Close Screen |
| Screenshot Icon | Screenshot | Touch to take a screenshot |
| Car Setting Icon | Car setting | Touch to enter Car setting |
| Clean-up Icon | Clean-up | Touch to clean |
| Video Out Icon | Video out | Touch to set Video out |
| Optical Icon | OPTICAL | Turn on/off OPTICAL |
4. On-Screen APP Icons
If an APP is included in the product, an additional accessory may be required for its use.
| Icon | Name | Operations |
|---|---|---|
| BT Icon | BT | Touch into bluetooth |
| ESSGOO Voice Icon | ESSGOO Voice | Touch to enter smart voice settings |
| ESSGOO + Icon | ESSGOO + | Touch to enter the intelligent voice software |
| DAB+ Icon | DAB+ | Touch to enter DAB+ |
| HERE WeGo Icon | HERE WeGo | Touch to enter offline map |
| Car Set Icon | Car set | Touch to enter car settings |
| Car Settings Icon | Car Settings | Touch to enter settings, enter password 000000 for factory settings |
| Maps Icon | Maps | Touch to enter google map online |
| Phonelink/TIMA Icon | Phonelink/TIMA | Touch to connect to mobile phone |
| Video Icon | Video | Touch to enter video playback |
| Filemanager Icon | Filemanager | Touch to enter file management |
Main Functions and Usage
1. Intelligent Voice - ESSGOO+ (Optional)
You can activate the intelligent voice assistant by shouting: "Hey TOP". In the "instruction" interface, you can find specific voice commands. Simply speak the corresponding command to use it. Log in to ESSGOO+ with your Google email or Facebook account to access product introductions, operation videos, and promotional content. You can also find answers to common questions in the "Q&A" section.
2. Quick Bar Operation
The quick bar allows for easy access to frequently used functions. You can customize it by long-pressing an icon to delete it, or clicking the '+' sign to add a shortcut. Up to 5 shortcut icons can be displayed simultaneously; swipe left/right to switch between more icons.
3. Radio
The radio interface allows you to switch bands, mute audio, search for stations, fine-tune frequencies, and manage a list of saved stations. RDS functionality can also be enabled.

4. Bluetooth Connection
The Bluetooth interface allows for dialing, accessing contacts (manual refresh/synchronization required), viewing call history, managing paired devices, and adjusting Bluetooth settings (name, auto-answer).

5. CarPlay and Android Auto Connection
This unit supports both wired and wireless CarPlay and Android Auto.
- Wireless Connection: Turn on Wi-Fi and Bluetooth on your phone. Go to Settings > General > CarPlay (or Android Auto) > Click Essgoo-BT > Pair > Connect.
- Wired Connection: Use a phone data cable to connect your phone to the USB port of the device. Follow the prompts on your phone to enable CarPlay/Android Auto. (Using the original phone cable is recommended for stable connection).
- For CarPlay, Siri voice control must be enabled on your phone.
- If the CarPlay/Android Auto interface does not appear, click the ZLINK icon on the in-car display.

6. Screen Mirroring
The screen mirroring function allows you to project your smartphone screen onto the car stereo display.
- Mirror: Click to switch to mirror screen projection.
- Settings: Enter ZLINK settings to configure driver's seat/background connection.
- Wireless Screen Mirroring (iOS): Follow on-screen prompts to connect to your phone's hotspot and enable mirroring on your phone.

7. DSP (Digital Sound Processor)
The DSP function allows for advanced audio adjustments.
- DSP Switch: Enable/disable DSP audio effects.
- EQ: Adjust equalization effects manually.
- Sound Effects: Set surround sound and equalization.
- Ultra-Bass: Configure ultra-bass settings.
- ASP: Select built-in sound effects and adjust manually.
- Balance: Adjust sound field balance to optimize the listening area.
8. Local Music and Videos
Access and play music and video files stored on your device or a connected USB drive. Features include loop playback (random, sequential, loop), track/video navigation, play/pause, and playlist viewing. Sound effects can be adjusted via the DSP settings interface.
9. Map Navigation
The unit supports various navigation applications like Google Maps and WAZE.
- Search Box: Open the search box and keyboard to enter destinations.
- Surroundings: Display services around your current location.
- Type: Switch map type and route mode.
- Location: Display your current location.
- Personal Center: Access personalized settings after logging in.
10. Steering Wheel Button Learning
This feature allows you to program your vehicle's steering wheel controls to operate the car stereo. This function is applicable to models without CAN-BUS.

- Switch to "Learning" mode.
- Enter the control learning operation interface.
- Click the function icon you wish to learn (e.g., Volume +) on the screen.
- Press the corresponding button on your steering wheel.
- After learning all buttons, click "Return" to save settings.
11. In-Vehicle Settings
Access various settings related to your vehicle and the unit's display.
- General Settings: Radio, rearview, square control, reverse assist lines.
- Display Settings: Screen saver, wallpaper, brightness.
- Sound Settings: Navigation, media, Bluetooth volume.
- Factory Settings: Vehicle model CAN-BUS related settings (password is 6 zeros).
- System Information: Current host configuration and version.
- Colorful Lights: (Only available on certain models) Adjust colorful light settings.
12. Touch Calibration
If you experience touch abnormalities (deviation, reverse touch, no touch), perform touch calibration:
- After the car computer boots up, press and hold the touch screen with five fingers.
- Wait 5 seconds, then slightly move your fingers to enter the touch calibration interface.
- Follow on-screen prompts to click the screen cursor in sequence. The system will return to the main interface once calibration is complete.
13. Theme
Select your preferred theme from the available options and click OK to switch.
14. File Manager
The file manager allows you to browse and manage files on connected USB devices.
- USB Device: Click to open the USB device and view files.
- Copy Files: Select a file, long-press its name to bring up a context menu, then select "Copy".
- Paste Files: Navigate to the desired directory and click "Paste" to copy the files.
Maintenance
File Copy Method
To copy files from a USB device to the unit's storage:
- Click the USB Device icon to open the USB device and view files.
- Select the file to be copied, long-press the file name, and a context menu will appear. Click 'Copy'.
- Click the main directory icon to return to the root directory of the file manager.
- Select the directory where you want to save the files.
- Click "Paste" to copy the files to that directory.
Troubleshooting
Touch Screen Issues
If the touch screen is unresponsive or inaccurate, refer to the Touch Calibration section in the Operating Instructions to recalibrate the screen.
General Problem Solutions
For common problem solutions, you can scan the QR code provided in the original manual (page 2 of the PDF manual) with your smartphone. This QR code links to a resource for troubleshooting.
Specifications
| Feature | Specification |
|---|---|
| Power Amplifier Chip | TDA7388 |
| Radio Chip | QN8035 |
| Screen Type | TFT, Full Touch IPS Screen |
| Screen Resolution | 1024*600 |
| Display Size | 7 inches |
| Radio Frequency | 87.5-108MHz |
| Radio Bands | FM1, FM2, FM3 (18 pre-store stations) |
| Reversing View | Supports HD Camera (wired connection) |
| Bluetooth Version | 5.0 |
| Remote Control | Supported |
| Audio Format Support | MP3, WMA, WAV, FLAC, OGG, APE (CD level for APE) |
| Video Format Support | RM, RMVB, DVD (VOB), VCD (DAT), MP1, MP2, DIVX/XVID/MP4, H263, H264, FLV, MKV, 3GP, SWF, AVI, ASF, MJPEG; H.264 BP/MP/HP up to 1920x1080@30fps decoding |
| Picture Format Support | JPEG |
| Key Functions | MP5, Rear View, Bluetooth, Mobile phone interconnection, Wired and Wireless CarPlay, Wired and Wireless Android Auto |
| OSD Languages | English, Spanish, Portuguese, Russian, Italian, German, French, Japanese, Polish, Turkish, Czech, Chinese (Simplified), Chinese (Traditional), Arabic, Korean |
| Installation Size | 100*178MM (Double Din) |
| Operating System | Windows CE |
| Voltage | 12 V |
| Item Weight | 0.8 kg |
| Special Features | Built-In Speaker/Microphone, Wi-Fi function, CarPlay, Android Auto, Reversing Input |
| Origin | Mainland China |
| Vehicle Compatibility | Universal |
| Certification | CE |
User Tips
- Easy Installation: Users have reported that installation can be straightforward, even for older vehicle models like a 2007 Renault Trafic.
- Wireless CarPlay/Android Auto: The Wi-Fi functionality is key for enjoying wireless CarPlay and Android Auto. Ensure your phone's Wi-Fi and Bluetooth are enabled for seamless connection.
- Steering Wheel Controls: The unit supports steering wheel control learning. If your vehicle does not have CAN-BUS, you can program the buttons for convenience.
- Rear View Camera: The manual provides a detailed wiring diagram for a wired rear view camera. If you are considering a wireless camera, please note that the provided instructions detail a wired setup.
Support and Compliance
Contact Information
Manufacturer/Exporter: SHEN ZHEN XIN SHENG SHANG TECHNOLOGY CO.,LTD.
Production Site: Room 303, Building 9, No. 54-6, Guanlan Avenue, Xinhe Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China (Zip Code: 518000)
Phone: +86 13048907387 (General), +1 2065363281 (United States), +49 8001014317 (Germany), +44 1518080196 (United Kingdom)
E-mail: support@essgoo.com
Official Website: www.essgoo.com
Facebook ID: Essgoo.Official
Privacy Policy
For information on how your personal data is protected, please visit the ESSGOO privacy policy page: https://essgoo.com/pages/privacy-policy.
EU Declaration of Conformity
This device complies with the essential requirements and other relevant provisions of Directive 2014/30/EU and Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at: https://essgoo.com/pages/doc.
Additional Resources
A comprehensive user manual in PDF format is available for download: User Manual (PDF).