INGCO VC12302

Contents

INGCO VC12302 Industrial Aspirator 1200W User Manual

Model: VC12302 | Brand: INGCO

1. Introduction

The INGCO VC12302 Industrial Aspirator is a powerful 1200W wet and dry vacuum cleaner designed for industrial and heavy-duty cleaning tasks. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your aspirator.

INGCO VC12302 Industrial Aspirator, front-side view
Figure 1: INGCO VC12302 Industrial Aspirator

2. Safety Instructions

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

General Safety

  • Read all instructions carefully before use.
  • Do not operate the aspirator in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and unauthorized persons away from the operating area.
  • Always unplug the aspirator from the power outlet before performing any adjustments, changing accessories, or storing the unit.
  • Do not use the aspirator if the power cord or plug is damaged.
  • Do not use the aspirator to pick up hot ashes, burning or smoking objects, or any toxic substances.
  • Ensure all filters are correctly installed before operation.

Electrical Safety

  • Ensure the power supply voltage matches the rating label on the aspirator.
  • Do not abuse the power cord. Never use the cord for carrying, pulling, or unplugging the aspirator.
  • Keep the power cord away from heat, oil, sharp edges, or moving parts.
  • Use only extension cords that are suitable for outdoor use and rated for the power consumption of the aspirator.

3. Package Contents

Verify that all items are present upon unpacking:

  • 1 x INGCO VC12302 Industrial Aspirator Unit
  • 1 x Hose
  • 1 x Floor brush
  • 1 x Plastic tube
  • 1 x HEFA filter (made of stainless steel)
  • 1 x 1.8m Power cable
  • 1 x Holder for liquid accessories
  • 1 x Entry tray
INGCO VC12302 Industrial Aspirator, side view
Figure 2: Side view of the aspirator with accessories

4. Specifications

FeatureSpecification
Rated Power1200W
Rated Voltage220-240V
Frequency50/60Hz
Dust Capacity / Bin Capacity30L
Vacuum Pressure16-18Kpa
Air Flow / Maximum Air Flow1.8-1.9m³/min
Noise Level19-83dB (A)
Cable Length (total)1.8m
Psum3200W
Protection ClassIP24
CertificationCE

5. Setup

Follow these steps to assemble your industrial aspirator before first use:

  1. Unpack: Carefully remove all components from the packaging.
  2. Attach Wheels (if not pre-assembled): Securely attach the wheels to the base of the aspirator according to the diagrams in the product packaging.
  3. Install Filter: For dry vacuuming, ensure the stainless steel HEFA filter is properly seated over the motor housing. For wet vacuuming, remove the HEFA filter and ensure a foam filter (if included, or refer to specific wet vacuuming instructions) is in place to protect the motor.
  4. Connect Hose: Insert one end of the hose firmly into the suction inlet on the tank.
  5. Assemble Extension Tubes and Nozzle: Connect the plastic tube(s) to the free end of the hose, then attach the floor brush or desired accessory.
  6. Power Connection: Ensure the aspirator is switched OFF before plugging the 1.8m power cable into a suitable 220-240V power outlet.
INGCO VC12302 Industrial Aspirator, another angle
Figure 3: Aspirator with hose and accessories attached

6. Operating Instructions

Dry Vacuuming

  1. Ensure the stainless steel HEFA filter is clean and correctly installed.
  2. Connect the hose, extension tubes, and desired dry vacuuming accessory (e.g., floor brush).
  3. Plug the aspirator into a power outlet.
  4. Switch the aspirator ON using the power switch.
  5. Begin vacuuming the dry debris.
  6. When finished, switch the aspirator OFF and unplug it.
  7. Empty the tank and clean the filter as needed.

Wet Vacuuming

  1. IMPORTANT: Remove the HEFA filter before wet vacuuming. If a foam filter is provided for wet use, install it according to instructions. Failure to do so will damage the HEFA filter and potentially the motor.
  2. Connect the hose, extension tubes, and a suitable wet vacuuming accessory.
  3. Plug the aspirator into a power outlet.
  4. Switch the aspirator ON.
  5. Begin vacuuming liquids. The aspirator has a float mechanism that will shut off suction when the tank is full.
  6. When the tank is full or you are finished, switch the aspirator OFF and unplug it.
  7. Empty the liquid from the tank.

Blower Function (if applicable)

Some models may feature a blower port. If available, detach the hose from the suction inlet and attach it to the blower port. The aspirator can then be used to blow away debris.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your aspirator.

  • Emptying the Tank: After each use, especially after wet vacuuming, empty the tank. Release the latches, remove the motor head, and pour out the contents. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly.
  • Filter Cleaning:
    • HEFA Filter (Dry Use): Tap the filter gently to dislodge dust. For deeper cleaning, rinse with water and allow it to air dry completely before reinstallation. Do not use the filter while wet.
    • Foam Filter (Wet Use): Rinse the foam filter with water and allow it to air dry completely.
  • Hose and Accessories: Clean the hose and accessories by rinsing them with water. Ensure they are free of blockages and dry before storage.
  • Storage: Store the aspirator and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues with your aspirator, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Aspirator does not startNo power supply
Faulty power switch
Check power cord and outlet
Contact customer support
Loss of suction powerClogged filter
Blocked hose/nozzle
Tank full (wet vacuuming)
Loose connections
Clean or replace filter
Clear blockage
Empty tank
Check all connections
Motor overheatsClogged filter
Prolonged heavy use
Clean filter
Allow aspirator to cool down
Water/foam coming from exhaustTank is full (wet vacuuming)
HEFA filter used for wet vacuuming
Empty tank
Remove HEFA filter and use appropriate wet filter

9. User Tips

No specific user tips are available from reviews or Q&A at this time. Always refer to the instructions for proper use and maintenance.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.