1. Introduction
The Philips SFL3153 Headlamp is a versatile, high-power LED flashlight designed for various outdoor activities. It features intelligent infrared sensing, multiple lighting modes, and a rechargeable battery, making it suitable for use as a headlamp, clip cap lamp, camping lamp, and for emergency signaling with red and blue warning lights.
2. Setup
2.1 Head-Mounted Use
Attach the headlamp to the Philips custom headlamp belt. The belt is designed for comfort, breathability, and is adjustable and elastic. It can be removed for cleaning and adapts to various head sizes.
2.2 Clip Cap Use
The headlamp features a clip cap design. It can be securely clipped above the brim of a hat. The lamp offers a 140° rotary adjustment, allowing you to direct the light to a suitable angle without obstructing your line of sight or adding significant weight.
2.3 Camping Lamp Use
For camping, the headlamp belt can be hung on a tree branch or inside a tent. It can be paired with a soft light cover (purchased separately) to transform it into a camping light with soft, wide-range illumination.
3. Operating Instructions
The Philips SFL3153 Headlamp features a dual switch mode: a Power Switch and an Induction Switch.
3.1 Power Switch Operations (10 Light Modes)
The power switch controls various lighting modes:
- Single Click: Cycles through main light modes: Low brightness, Medium bright, Highlight, Auxiliary lamp (white light). Another click will shut down the device.
- Double Click: Activates special modes: Flash and SOS. Double-click again to return to the previous state.
- Long Press: Activates warning lights: Red light warning, then Red and blue warning light (flashes alternately).
- Automatic Shutdown: If the headlamp remains in any single gear for more than 10 seconds, a single click of the power button will shut it down directly.
3.2 Induction Switch Operations (Intelligent Sensing)
The induction switch enables intelligent infrared sensing:
- Activation: Click the sensor switch when the headlamp is working. This activates the infrared sensor (indicated by a main light double flash prompt).
- Operation: Once activated, you can control the power switch (main light) by waving your hand within a sensing distance of 20cm to turn the light on or off.
- Deactivation: Click the sensor switch again to turn off the infrared sensor.
4. Maintenance
4.1 Charging
The SFL3153 Headlamp is equipped with a built-in 1000mAh polymer lithium battery and supports Type-C direct charging. Connect the headlamp to a 5V 1A USB power source using a Type-C cable. There is no need to disassemble the battery for charging, ensuring high charging efficiency and safety.
4.2 Battery Indicator
The headlamp features a smart battery reminder system:
- Green Light: Battery power is above 30%.
- Red Light: Battery power is between 30% and 10%.
- Red Light Flashes: Battery power is below 10%.
4.3 Cleaning
The custom headlamp belt is removable and easy to clean. For the headlamp unit itself, wipe with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
5. Troubleshooting
- Light does not turn on:
- Ensure the battery is charged. Refer to Section 4.1 for charging instructions.
- Check if the correct switch (Power or Induction) is being used and activated properly.
- Infrared Induction not working:
- Ensure the induction switch is activated (main light double flash prompt).
- Make sure your hand is within the 20cm sensing distance.
- Ensure there are no obstructions between your hand and the sensor.
- Short battery life:
- Ensure the headlamp is fully charged before use.
- Using higher brightness modes (e.g., Highlight) will consume battery faster.
- Battery performance may vary with environmental conditions (e.g., cold temperatures).
6. Specifications
| Feature | Detail |
|---|---|
| Model | SFL3153RH |
| Lamp Bead Power | 5W |
| Anti-fall Height | 1 m |
| Battery Capacity | 1000mAh |
| Light Mode | Normal-Special-Red-Blue Warning Light |
| Lighting Time (Max) | 300 minutes (strong light) |
| Charging Time | Approx. 3 hours (5V 1A) |
| Charging Mode | USB Type-C |
| Net Weight | 60g |
| Product Size (W*H*T) | 59*41*35mm |
Note: Data obtained from Philips laboratory sample tests. Actual performance may vary due to different use environments.
7. User Tips
- Versatile Use: Remember the headlamp's adaptability. It can be worn on the head, clipped to a cap, or used as a stationary camping light. Choose the mode that best suits your activity.
- Hands-Free Operation: Utilize the intelligent infrared sensing for convenience, especially when your hands are occupied or dirty. A simple wave can turn the light on or off.
- Battery Monitoring: Pay attention to the battery indicator lights (green, red, flashing red) to avoid unexpected power loss during critical moments.
8. Warranty and Support
For any questions regarding the Philips SFL3153 Headlamp, including warranty information or technical support, please contact the seller or Philips customer service directly. Keep your purchase receipt for warranty claims.
