Erilles CX5

Contents

10.1" Android 14 Car Multimedia Player User Manual

For Mazda CX5 (2012-2015)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and troubleshooting of your 10.1-inch Android 14 Car Multimedia Player for Mazda CX5 (2012-2015). Please read this manual carefully before installation and use to ensure proper functionality and to prevent damage to the device or your vehicle.

Android 14 Car Multimedia Player for Mazda CX5
Figure 1: 10.1" Android 14 Car Multimedia Player with 360° Panorama Camera support.

Watch a brief overview of the product's features:

Video 1: Product feature overview showcasing navigation, Bluetooth, DSP, split screen, and camera functions.

2. Package Contents

Please check the package for the following items:

  • 1x Car Radio Host
  • 1x Frame (specific to Mazda CX5 2012-2015)
  • 1x Power Cable Kit (Plug and play)
  • 2x USB Cables
  • 1x RCA Cable
  • 1x GPS Antenna
  • 1x Camera Input Cable
  • 1x 4G Cable (Only for 4G models)
  • Optional accessories (e.g., camera gifts, tools) may be included depending on your purchase.
Package contents showing head unit, frame, and original radio
Figure 2: Main components of the car multimedia player package.

3. Specifications

The following table outlines the general specifications of the car multimedia player. Note that some features may be optional and depend on the specific configuration purchased.

FeatureSpecification
Operating SystemAndroid 14
Display Size10.1 inches
Display TypeQLED (Optional 2K 2000x1200)
CPU8-Core (64bit Eight Core CPU)
RAM/ROMVarious configurations (e.g., 2G+32G, 4G+32G, 4G+64G, 4G+128G, 8G+128G, 8G+256G, 12G+256G)
Voltage12 V
Max External Memory256G
TF/Micro SD Slot1
Din TypeDouble Din
Touch ScreenYes
Built-in ScreenYes
Special FeaturesWiFi function, Support Steering Wheel Control, Built-In Speaker/Microphone, Support Can-Bus, Support 3G/4G Network, MP3 players, Split Screen, Android Auto, DSP, Reversing Input, Mobile Phone, CarPlay, Built-in GPS, Charger, ADAS DVR, Rear View Camera, Voice Control, HDMI IN, Button Light, Built-in Cooling Fan
Digital Media FormatMP4, MP3, WMA, JPEG
OSD LanguageMulti-language support (Welsh, Turkish, Thai, Swahili, Arabic, Japanese, Albanian, Portuguese, Chinese (Traditional/Simplified), Slovenian, Slovak, Serbian, Azeri, Swedish, Macedonian, Malay, Maltese, Romanian, Norwegian, Czech, Lithuanian, Latvian, Latin, Croatian, Dutch, Korean, Haitian Creole, Georgian, Catalan, Galicia, Vietnamese, English, Indonesian, Urdu India, Finnish, Filipino, French, Russian, Persian, Polish, Hindi, Icelandic, Yiddish, Bulgarian, Italian, German, Danish, Boolean text (Dutch South Africa), Greek, Hebrew, Ukrainian, Belarusian, Armenian, Estonian, Hungarian, Irish, Spanish, Spain's Basque)
CertificationCE
Good Performance, Fast Response icons
Figure 3: Overview of key features and performance indicators.

4. Setup and Installation

Improper connection may damage the device. Pay attention to the correct wiring.

4.1 Pinout Diagram of the Device Connector

Pinout diagram of the device connector
Figure 4: Pinout diagram for the main device connectors.

The main connectors are:

  • A: Audio / Video Connector
  • B: Redundant expansion (not allowed for third-party connectors)
  • C: CANBUS Connector
  • D: USB (4 PIN)
  • E: USB (6 PIN)
  • F: Reverse Video Out
  • G: Main Power Cable
  • H: Radio
  • I: GPS
  • J: 4G Antenna
  • K: Optical audio output

4.2 Wiring Diagram

Detailed wiring diagram for the car multimedia player
Figure 5: Detailed wiring connections for the device.

Refer to the diagram for specific connections:

  • A (Audio/Video): AMP_POW (Amplifier control), GND (RCA_FL/RCA_FR), AUXIN_R, RCA_FL, AUXIN_L, RCA_FR, GND (AUX IN_L/AUXIN_R), SUB subwoofer output, CVBS_IN2 video input 2, CVBS_IN1 video input 1, MIC-microphone, MIC+ microphone.
  • C (CANBUS): GND (AUX IN_L/AUXIN_R), POW_12V, AUX2_L, AUX2_R, KEY_RST, IPOD_DET, CAN_TXD (CANBUS), CAN_TXD (CANBUS).
  • D (USB): USB_5V, USB_DP0 USB0, GND USB, USB_DN0 USB0.
  • E (USB): USB_5V, USB_DP1 USB1, GND USB, USB_DN1 USB1, USB_DN2 USB2, USB_DP2 USB2.
  • F (Other): TXD_TPMS OBD, RXD_TPMS OBD, GND, POW_5V (TPMS), CAM_CVBS (Reverse image), CAM_12V (Reverse image), CVBS_GND (Reverse image), PARK_IN (Hand brake detection), GND.
  • G (Main Power Cable): GND, B+ 12V, ACC +12V, ILL (Car headlights), Reverse Detection, KEY 2, KEY 1, Automatic Antenna Power Supply, Speaker outputs (FR-, RL-, FR+, RL+, FL+, RR+, FL+, RR-).

4.3 Vehicle-Specific Installation Notes for Mazda CX5 (2012-2015)

The car multimedia player is designed for Mazda CX5 models from 2012 to 2015. Different factory radio configurations require specific wiring. Please identify your car's configuration before installation.

Mazda CX5 installation configurations A, B, C
Figure 6: Installation configurations for Mazda CX5 2012-2015 based on factory radio type.
  • If there is no screen on the standard factory radio and no standard reversing camera, choose configuration "A".
  • If a screen is present on the OEM radio, select configuration "B".
  • If a screen appears on the OEM radio from the factory, select configuration "C".

Wiring Harness Selection:

Wiring harness for configuration A and B
Figure 7: Default wiring harness for configuration A and CANBUS harness for configuration B.
Wiring harness for configuration C
Figure 8: CANBUS cable required for C model (e.g., CX-5 2016 Factory Navigation Unit, CX-3 HU with Audio Bose).

Important: Different configurations come with different wires. Please confirm your car's configuration (A, B, or C) before installation.

4.4 CANBUS Connection & Use

The radio is divided into those that require CANBUS and those that do not. The CANBUS function ensures original car functions like steering wheel control and original car camera work correctly. Most original car radios do not require CANBUS if they only have radio functionality without a display or original camera.

The CANBUS protocol is usually pre-set before shipment. If you encounter issues, you may need to check and set the CANBUS according to the brand and model or provide your CANBUS option interface for assistance.

Common CANBUS brands include Raise (RZC), Hiworld (HW), Xinbas (XBS), Binary (BNR), and Simple soft (XP).

4.4.1 CANBUS Wiring Diagram (Example: Volkswagen)

CANBUS wiring diagram example
Figure 9: Example CANBUS wiring diagram.

4.4.2 CANBUS Settings (Example: Volkswagen)

  1. Click "Car Settings" on the main interface.
  2. Click "General".
  3. Enter "Extra settings".
  4. Enter password: 123456, then click "OK".
  5. Enter "Model choose".
  6. Click "Raise" (or your specific CANBUS Brand).
  7. Click "VW" (or your specific Car Brand).
  8. Click "02:12 Passat" (or your specific Car year and model).
  9. Click "Public".
  10. Wait for download (requires internet connection).
  11. After successful upgrade, click "OK".
  12. Wait for download to complete.
  13. Click "OK" and wait for restart (do not power off during this process).

Note: After the selection is complete, click OK, wait for the data to be downloaded. The radio will restart automatically. Please do not disconnect the power supply halfway, because the radio is updating the system model data.

4.5 How to Connect the Rear Camera

If you are installing a rear camera, follow these connection steps:

Rear camera wiring diagram
Figure 10: Rear camera connection diagram.

Connect the camera's trigger line to the reversing trigger line (G5). Connect the camera's positive power wire to the backup light "+". Connect the camera's negative power wire to the backup light "-".

In most cases, the connection can be completed by directly connecting the Back (Reverse) trigger line. If there is no Back (Reverse) trigger line, it is triggered by CANBUS. If you encounter issues, please contact support.

4.5.1 Rear Camera Definition Setting

  1. Click "Car Settings" on the main interface.
  2. Click "Reversing".
  3. Choose the right camera format (e.g., NTSC, PAL, AHD 720p 25fps, AHD 720p 30fps, TVI 720p 25fps, TVI 720p 30fps, AHD 1080p 25fps, AHD 1080p 30fps, TVI 1080p 25fps).
Rear camera settings interface
Figure 11: Interface for setting rear camera parameters.

4.6 Install USB DVR (Optional)

If you have purchased a USB DVR, follow these steps:

USB DVR device
Figure 12: USB ADAS Car DVR.
  1. Connect the DVR to the Android Player via a USB port.
  2. Open "File Manager" on the head unit.
  3. Click on "uCarDVR.apk" to install the application.
  4. Open the installed application.
  5. Connect to the network and check for new versions for upgrade.
  6. Start your driving experience with the DVR.

4.7 Install USB TPMS (Optional)

If you have purchased a USB TPMS (Tire Pressure Monitoring System), follow these steps:

USB TPMS sensors and receiver
Figure 13: USB TPMS components.
  1. Install the TPMS sensors on your tires.
  2. Connect the TPMS receiver to the head unit via a USB port.
  3. Connect a U-disk containing the TPMS app to the head unit via a USB port.
  4. Open "File Manager".
  5. Click on "USB new.apk" to install the application.
  6. The APP should install successfully.
  7. Use the TPMS interface to monitor tire pressure.
  8. Pop-up warnings will display for low pressure.

5. Basic Operation

5.1 Turning On and Turning Off

  • Turning On: Insert the car key and turn on the car's ACC power. The device will automatically turn on and display the startup animation LOGO.
  • Turning Off: Remove the car key and turn off the car's ACC power. The device will automatically shut down.

5.2 Panel Function Buttons

Panel function buttons diagram
Figure 14: Overview of the panel function buttons.
  • ① MIC: Bluetooth call sound input.
  • ② RST: Click the reset button to reset the system and restart.
  • ③ Power/Sleep: Short press for mute, long press for sleep mode.
  • ④ Home: Back to Home page.
  • ⑤ Back: Return to the previous interface.
  • ⑥ Volume +: Increase volume.
  • ⑦ Volume -: Decrease volume.

5.3 Tips for Using the Touch Screen

The touch screen supports various gestures for interaction:

Touch screen gestures: Clicking, Pressing, Dragging, Zooming
Figure 15: Visual guide to touch screen gestures.
  • Clicking Function: Tap an app icon or option to select it. For example, tap "Bluetooth" to enter the Bluetooth application.
  • Pressing Function: Tap and hold an icon or input field for more operation options. For example, tap and hold a blank area on the main interface to open a pop-up menu.
  • Dragging Function: Swipe the touch screen or tap and hold the scroll bar to move up or down. Useful for browsing contact lists.
  • Zooming Function: Double-tap the screen to zoom in or out on a picture. Alternatively, use two fingers to tap and hold, then slide them apart or together to zoom.

6. Function Operation

6.1 User Defined Home Screen

The device offers 10 built-in user interfaces (UIs). To change the theme:

  1. Click the "Theme" icon.
  2. Choose the desired theme to set.
  3. The theme setting interface will appear.
  4. The theme can be updated if a new version is available.

6.2 Setting Wallpaper

To set the wallpaper:

  • Go to Car settings > More > Display > Wallpaper.
  • Select your favorite wallpaper and tap "Set Wallpaper".
  • Alternatively, select a picture from the gallery and tap "Save".

6.3 Steering Wheel Control

The user can set the steering wheel controls according to the prompts. The square control interface is for cars with buttons on the steering wheel. Some cars (e.g., Volkswagen, Skoda) implement steering wheel buttons through CANBUS.

Steering Wheel Learning Steps:

  1. Press any button on the steering wheel. The interface will display. Press and hold a direction button. If no button is pressed within a certain time, learning will fail.
  2. Click on the screen to learn the function of docking.
  3. Press the corresponding function button on the steering wheel.

Repeat this process until all control buttons on the steering wheel have been learned.

For a visual guide, refer to this video: Steering Wheel Learning Video

Steering wheel control interface
Figure 16: Interface for setting steering wheel controls.

6.4 Screen Calibration

To calibrate the screen, use five fingers to press on the screen simultaneously. Four points will appear. Click on the red points until learning is successful. Then proceed to learn the touch buttons.

For a visual guide, refer to this video: Screen Calibration Video

6.5 Navigation Application

To select the corresponding map application to associate with the navigation icon on the main interface:

  • Go to Car Settings > Navi > Current selection.
  • Select the Navi app you wish to use.
Built-in GPS navigation
Figure 17: Built-in GPS navigation interface.

You can download and install your favorite navigation application. An IGO MAP is often pre-installed or available for download. For example: IGO MAP Download

6.6 Language Settings

To change the system language:

  1. Click "Car Settings".
  2. Click "More".
  3. Click "System".
  4. Click "Languages & input".
  5. Click "Languages".
  6. Click "Add a language" and select the language you need.
  7. Long press the desired language and move it to the top of the list.

6.7 Factory Settings

Caution: Restoring factory settings will delete third-party software and current system settings. Navigation software will need to be reinstalled.

If the system becomes unstable or problematic, you can restore factory settings:

  1. Click "Car Settings".
  2. Click "General".
  3. Click "Reset factory".
  4. Enter the password: 7890, click "OK", and wait for the system to restart.

6.8 Split Screen Function

The split screen function allows two applications to be displayed simultaneously.

For a visual guide, refer to this video: Split Screen Video

  1. Click the icon to bring up all running apps.
  2. Hold one of the apps and drag it to the left or right prompt position.
  3. After entering split screen state, gently tap (not drag) another app to automatically fill the other half of the screen.
  4. The screen will now show two apps in split screen mode.
  5. To exit split screen, hold down one of the apps and drag it all the way to the edge of the other side of the screen.
Split screen feature showing two apps simultaneously
Figure 18: Split screen functionality displaying two applications.

6.9 Float Video Settings

The float video function allows a video to play on top of other applications.

For a visual guide, refer to this video: Float Video Video

  1. On the video play interface, click the "Settings" icon.
  2. Set "Float video" to "ON".
  3. Play a video.
  4. Click the "HOME" button.
  5. The video will be on top of any interface. Click the close button above the video to exit.

Warning: If the screen displays "Watching video while driving is prohibited", you need to go through the settings to play the video normally. Go to Video playback interface > Settings > Brake setting > Close.

6.10 Radio Function

The radio interface supports both automatic and manual station search.

FM/AM RDS Radio interface
Figure 19: FM/AM RDS Radio interface.

6.10.1 Radio Function Description

IconButton NameFunction Description
RDSRDSClick to open RDS related functions.
QAuto SearchScans and stores radio stations automatically.
<<Search Channel ForwardsClick to search channel forwards then stop when strong and clear channel is found.
>>Search Channel BackwardsClick to search channel backwards then stop when strong and clear channel is found.
BANDFM / AM SwitchingClick to switch FM / AM.
LOC/DXLOC and DX switchingDX: More stations with stronger signals are searched, but not every station is clear enough. LOC: You can find clear and strong radio stations, but fewer than remote stations.
EQEQClick to enter EQ setting interface.
SettingsSettingsRadio settings.
<<Forward tuningForward tuning radio.
>>Back tuningBack tuning radio.

6.10.2 Select Radio Region

To improve radio effect, set the radio area:

  1. Click "Car Settings".
  2. Click "More".
  3. Click "Extra settings".
  4. Enter password: 123456, click "OK".
  5. Click "Select radio region".
  6. Select your desired radio region (e.g., CHINA, EUROPE, USA, SOUTHEAST ASIA, SOUTH AMERICA, EASTERN EUROPE, JAPAN, Australia).

6.10.3 Radio Signal Problems

If the radio signal is poor, it might be due to the car's original radio signal amplifier being in the original radio or antenna. If the amplifier is in the original radio, you may need an additional signal amplifier. Also, check your antenna connection.

Note for Volkswagen: Volkswagen has a dual antenna interface. Only one needs to be connected. If you experience poor connection, you may need a dual antenna adapter (not included).

6.11 CarPlay and Android Auto

The car multimedia player supports both Wireless CarPlay and Wired Android Auto.

CarPlay and Android Auto connection instructions
Figure 20: Connection instructions for CarPlay and Android Auto.

6.11.1 How to Use CarPlay (ISO CarPlay)

  1. Click "TLINK" on the main interface.
  2. Click "Help".
  3. Follow the on-screen prompts to connect your iPhone via Bluetooth. CarPlay can also be connected via USB cable.
  4. Connection succeeded.

6.11.2 How to Use Android Auto (Wired)

  1. Click "TLINK" on the main interface.
  2. Install the "Android Auto" APK on your mobile phone.
  3. Connect your mobile phone to the head unit with a USB cable.
  4. Automatically connecting.
  5. Connection succeeded.

7. Troubleshooting

If you encounter problems, use this guide. If the issue persists, contact support. Do not attempt to open or repair the machine yourself to avoid serious consequences.

For a comprehensive video guide, refer to: Android Player Guide Video URL

Q: Why can't I boot the device?

A: The device is tested before shipment. Boot issues are usually power connection problems:

  1. Ensure ACC (G3) and 12V (G2) are connected to the positive pole of the car's 12V power supply, and G1 is connected to the negative pole. You can directly connect these 3 power cords to test.
  2. Check if the radio cable has fallen off during transportation. Open the back cover to check and reconnect.
  3. If the device still doesn't power on, record a video showing proper power cord connection and a 12V test with an electric meter, then contact support.

Q: Why doesn't GPS work?

A: Check the following:

  1. Ensure the GPS module is tightened.
  2. Click GPS monitoring to view the number of stars searched (normally more than 3 green stars).
  3. Place the GPS module on the A-pillar of the car.
  4. Turn off other electronic devices in the car that might interfere with GPS signals.

Q: Why does the Bluetooth connection fail?

A: Ensure Bluetooth is enabled on your phone and search for the device. Then:

  1. Check if the video input cable is plugged in. The two short blue cables are for Bluetooth and WiFi signals.
  2. Ignore previously connected devices on your phone and reconnect.
  3. Try connecting with another phone.

Q: Why does the left button light not light up?

A: Check if G4 on the power cord is connected to ACC.

Q: How to proofread the guide buttons?

A: Go to Car settings > General > Extra settings (password 123456) > Touch area Key. Click Start, then Clear, and then click each key to learn.

Q: Boot logo setting?

A: Go to Car settings > General > Extra settings (password 123456) > LOGO setting (supports custom startup picture).

Q: Why is the sound of the player low & noisy background sounds appear when playing music?

A: This is electronic equipment or power interference. You may need to install filters. Contact support for assistance.

Q: Why is there no original car setting when CANBUS is included, or the original car has abnormal functions?

A: Connect the machine to the network to update the CANBUS library, check, or reset CANBUS.

Q: How to wire Outlander 2 2005-2011/Lancer 2007-2013 with Rockford amplifier?

A1: If you have an RCA cable, connect the RCA AMP CTRL cable and AMP CONT cable together. The sound should work normally.

Wiring with RCA cable for Rockford amplifier
Figure 21: RCA cable connection for Rockford amplifier.

A2: If there is no RCA cable, find the AMP CTRL cable and connect it to the ACC cable (red). Do not cut the plastic.

Wiring without RCA cable for Rockford amplifier
Figure 22: Direct ACC cable connection for Rockford amplifier.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Regularly check for software updates to ensure optimal performance and access to new features. Updates can usually be found in the device settings under "System Update" or "About".
  • Temperature: The device has a built-in high-power fan to prevent issues caused by high temperatures. Ensure proper ventilation around the unit.
  • Power Management: Always turn off the car's ACC power before removing the key to ensure the device shuts down properly.
Built-in high power fan for cooling
Figure 23: Built-in high power fan for thermal management.

9. User Tips

  • CANBUS Compatibility: For Mazda CX5 2016 models with factory navigation or Bose audio, ensure you purchase the correct CANBUS cable (Configuration C) as the product is primarily designed for 2012-2015 models.
  • OEM Camera/Steering Controls: The device is designed to work with OEM back cameras and steering wheel controls via CANBUS. If these functions are not working, verify CANBUS settings and wiring.
  • Car Settings Integration: For Mazda vehicles, car settings like windows and lights should remain functional after installation, as the head unit primarily replaces the multimedia system.
  • Bose System: If your car has a Bose sound system, ensure the wiring is correctly configured to integrate with it. Some users report needing specific adapters or wiring adjustments for optimal sound.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. The product typically includes a warranty against manufacturing defects.

A user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.