1. Product Overview
Please read this manual carefully before using the product and keep it for future reference. Thank you for using HOTO Smart Laser Measure Pro.

Device Components

- Laser receiver lens
- Laser emission lens
- Display
- Mode switching button
- Power/Measure button
- Metal lanyard hole
- Type-C charging port
2. Display Overview

- Measuring basis/Laser emission alert
- Battery indicator
- Bluetooth connection
- Measuring angles in real time
- Measurement history – Group 1
- Measurement history – Group 2
- Measurement history – Group 3
- Real-time measurement data
- Measurement unit
3. Setup
Turning On/Off
- Power-on: In the power-off state, press the power/measure button (5) for more than 1 second to start the tool. The display will light up and enter test mode.
- Power-off: In the power-on state, press the power/measure button (5) for more than 3 seconds to turn off the tool.
- If the product is inactive for 180 seconds, it will automatically turn off.
Charging
- This rangefinder is equipped with a universal Type-C charging port (7) and comes with a USB charging cable.
- If it has not been used for a long time, fully charge the product before use.
- The tool does not measure during the charging process.

Bluetooth Connection
- Bluetooth is on by default and cannot be turned off manually. The screen will show a Bluetooth icon.
- Bluetooth will automatically turn on when the product is started, displaying a flashing Bluetooth icon. The HOTO app will automatically search for devices to pair with.
- When the product is started, open the HOTO app and click the upper right corner to add a device. Follow the steps, and the Bluetooth icon will be permanently lit when the connection is successful.
- If the connection fails within 180 seconds, Bluetooth will automatically turn off to save energy.
- Note: HOTO Smart Laser Measure Pro has a non-independent and complete Bluetooth module with CMIIT ID: 2020DP2859.
Connecting to the HOTO App
Scan the product's QR code or search for "HOTO app" in your app store. Download and install the HOTO app. If the app was previously installed, you will be directed to the device connection page.

- Tip: If the QR code cannot be scanned, please search for "HOTO app" to add the device.
- Tip: Due to updates on the HOTO app, the actual operation may slightly differ from the description provided above. Please follow the indications on the app.
Switching Reference Plane
By default, the reference plane of the product is the end reference. Please use the product end as the reference plane. To use the front reference, switch the reference plane in Product Settings - Rangefinder Settings in the app.
Changing Measurement Units
The product supports three measurement units, with "m" (meters) by default. Length units: 0.000m, 0.000ft, 0' 00'' 1/16. Size units: 0.000m^2, 0.000ft^2, 0.000ft^2. To use ft (foot) or 0' 00'' 1/16 (foot, inch, 1/16), please switch the measurement units in Product Settings found in the app.
Bluetooth Reset
When the laser measure is on/off, press and hold the power/measure button for 7 seconds, and the screen displays "RESET" and a checkmark to reset the product's Bluetooth network configuration information.
4. Operating Instructions
Vibration Feedback
- The instrument vibrates once when it is manually powered on/off.
- The instrument vibrates once when the switch is flipped to change modes.
- The instrument vibrates once when the measurement is finished.
Mode Switching
Flip the mode switching button (4) down to change modes in turn: Distance Measurement > Angle Measurement > Angles and Height Measurement > Size Measurement > Virtual Scale. Flip the switch upwards to change modes in reverse order.
Measuring Distance (Length)
- After starting the product, short press the power/measure button (5), and the tool will emit a laser and measure the distance. The present distance will be displayed in real time.
- Press the power/measure button (5) again to stop laser emission. The fixed numbers show measurement values.

Measuring Angles
- Flip the mode switching button (4) up or down to launch the Angle Measuring mode. The angle is displayed in real time.
- Press the power/measure button (5) again to stop laser emission. Numbers will stop to show measurement values.

Measuring Angles and Height
- Flip the mode switching button (4) up and down to initiate the Angle and Height Measurement mode.
- Short press the measure button (5) once to emit laser. The measurement will be conducted in real time and seen on the display.
- Press the measure button (5) again to stop laser emission. The number will stop and show the measurement data of a triangle's hypotenuse and inclination. After measuring the hypotenuse and inclination, the instrument will automatically calculate the height and horizontal distance.
- To continue the measurement, short press the measure button (5) again.

Measuring Size (Area)
- Flip the mode switching button (4) up or down to enter the Size Measurement mode.
- Short press the measure button (5) once to emit laser. The measurement will be conducted in real time and seen on the display. Press the measure button (5) again to stop laser emission. The measurement shows the rectangle's length.
- Use the same method to measure the rectangle's width, and the instrument will automatically calculate the rectangle's size.
- To continue the measurement, short press the measure button (5) again.

Virtual Scale
- Flip the mode switching button (4) up or down to launch the Virtual Scale mode.
- Short press the measure button (5) once to emit laser. The measurement will be conducted in real time. The default unit is cm.
- Press the power/measure button (5) again to stop laser emission, and the number will stop and show the measurement data.
- The minimum adjustable length is 0.2 m and the maximum length is 50 m.

Mobile Control and App Features
Connect to the HOTO App through Bluetooth and control through a mobile device. The smart and reliable way of measuring with memory capacity for 4 measurements, blueprint design, and on-photo annotations.
- Capture, Draw, and Measure: Capture or import an image. Draw, measure, and write directly on the photo.
- Instant Blueprint Drawing: Lengths are automatically calculated on the layout. Annotate data and edit the length of the lines.
5. Maintenance
- Keep the device clean and dry. Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Store the device in a cool, dry place when not in use.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Protect the laser lenses from scratches and dirt.
6. Troubleshooting
When the product is in use, the following indicators may appear in the main display area:
| Error | Cause | Solution |
|---|---|---|
| Quick flashing of the lightning bolt sign | The battery level is low. | Charge the laser measure. |
| Unable to charge | Charging temperature protection | It is recommended to charge at a normal temperature of about 25°C. |
| Couldn't measure and the display shows "-.---" | The laser reflective signal is too weak (e.g., when measuring black surfaces). | Measure a target with high reflectivity or use the laser measure with a reflective board. |
| Couldn't measure and the display shows "-.---" | The laser reflective signal is too strong (e.g., when measuring highly reflective surfaces). | Measure a target with low reflectivity or use the laser measure with a reflective board. |
| Couldn't measure and the display shows "-.---" | Out of the operating temperature range | Use the laser measure within the specified temperature range. |
| Couldn't measure and the display shows "-.---" | Out of measurement range | Use the laser measure within the measurement range. |
7. Specifications
| General Specifications | |
|---|---|
| Model: | H-D50 |
| Measurement Range: | 0.05—50 m |
| Measurement Accuracy: | ±(2 mm+D*1/10000) |
| Analog Ruler Scale Accuracy: | ±(4 mm+D*1/10000) |
| Minimum Displaying Unit: | 0.001 m |
| Measurement Unit: | m/ft |
| Laser Type: | 630-680 nm wavelength |
| Lithium-ion Battery: | 3.7V 850 mAh |
| Display Screen: | 1.77-inch LCD screen |
| Charging Input: | 5V 1A |
| Operating Power: | 1 W (MAX.) |
| Charging Time: | Approx. 100 min |
| Automatic Turn-off Time: | 180 s |
| Automatic Laser Off Time: | 180 s |
| Operating Temperature: | -10°C to 50°C |
| Storage Temperature: | -20°C to 60°C |
| Storage Humidity: | 20%-80% RH |
| Item Dimensions: | 99.5 × 44.1 × 23.3 mm |
| Net Weight: | Approx. 90 g |
| Bluetooth Transmission Distance: | Approx. 8 m |
Notes on Accuracy:
- In the analog ruler mode, the test accuracy is ±4mm.
- "D" refers to the actual distance in an indoor environment with standard reflective surfaces.
- All data produced by this product may vary slightly due to different actual measurement environments and should depend on users' actual measurements. The rangefinder is appropriate for indoor measurements. Measurement results may have relatively wide discrepancies in harsh environments such as extremely strong sunlight or excessively fluctuating temperature, weak reflective surfaces, and low battery power. The measuring range of 0.05m is the minimum measurable distance using head-based reference mode.
8. Warnings and Compliance
General Warnings
Read the safety and operating instructions carefully before using the laser measure for the first time. Failure to use the laser measure in accordance with the instructions indicated by this user manual will lead to damage to the laser measure, decreased measurement accuracy, or injuries to users or other people.
- Do not use any methods to disassemble or repair the laser measure on your own. Never illegally modify or change the laser emitting performance of the laser measure. Properly store the laser measure and keep it out of reach of children and unrelated people.
- Do not point the laser light at your eyes and other body parts or those of other people. Never aim the laser light at the surfaces of highly reflective objects.
- Do not use the laser measure near aircraft or medical equipment, or use it in a flammable or explosive environment, because the electromagnetic radiation of this laser measure may interfere with other devices.
- Do not dispose of used batteries and unusable laser measures with household waste. Dispose of them per national or local laws and regulations.
Laser Safety

LASER RADIATION: DO NOT STARE INTO BEAM. This is a CLASS 2 LASER PRODUCT with a maximum output of laser radiation <1 mW and a wavelength of 630-680 nm, compliant with IEC 60825-1:2014 and EN 60825-1:2014.
WEEE Disposal
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
CE Declaration of Conformity
We, Shanghai HOTO Technology Co., Ltd., hereby declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments, including 2014/53/EU (The Machinery Directive) and 20011/65/EU+ (EU) 2015/863 (Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment).
References to harmonized standards include: EN 62479:2010, EN 61010-1:2010, ETSI EN 301489-1 V2.2.3:2019, ETSI EN 301489-17 V3.2.2:2019, EN 61326-1:2013, EN 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, ETSI EN 300 328 V2.2.2:2018.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No.50 Moganshan Road, Putuo District, Shanghai, China
Telephone No.: 400-021-8696
For a detailed user manual, please refer to the User Manual (PDF).
9. User Tips
- Indoor Use Only: The rangefinder is designed for indoor measurements. Using it outdoors, especially in strong sunlight, can significantly affect laser reception and measurement accuracy.
- Accuracy Comparison: Do not compare the accuracy of the laser measure directly with a traditional tape measure. Laser measures and tape measures operate on different principles, and environmental factors can cause discrepancies.
- Rechargeable Battery: The device uses a rechargeable lithium battery with Type-C charging for convenience.
- App Integration: Utilize the HOTO app for advanced features like remote measurement control, blueprint drawing, and annotating measurements on photos.