BISSELL 4720Z

Contents

BISSELL Handheld Washing Vacuum Cleaner User Manual

Model: 4720Z

Introduction

This manual provides instructions for the safe and effective use of your BISSELL Handheld Washing Vacuum Cleaner. This portable machine is designed for deep cleaning of fabric surfaces such as carpets, upholstery, and curtains, helping to refresh your home environment.

Important Safety Information

  • Read all instructions before using the appliance.
  • Use only as described in this manual.
  • Do not immerse the machine in water.
  • Always disconnect from the power supply before cleaning or maintenance.
  • Keep children and pets away from the appliance during operation.
  • Use only BISSELL cleaning solutions designed for this machine.
  • Do not use with damaged cord or plug.

Package Contents

Verify that all parts are included:

  • BISSELL SpotClean Auto Main Unit
  • Flexible Hose with Cleaning Tool
  • Various Brush Attachments (e.g., Standard Brush, 3-in-1 Crevice Brush)
  • User Manual (this document)
BISSELL SpotClean Auto main unit with various cleaning attachments

Image: BISSELL SpotClean Auto main unit with various cleaning attachments, including a standard brush and a 3-in-1 crevice brush.

Setup

  1. Fill the Fresh Water Tank: Locate the fresh water tank (usually clear, smaller tank). Remove it from the main unit. Fill it with warm water (up to 60°C for enhanced cleaning, as per HeatWave Technology) and the recommended BISSELL cleaning solution. Do not overfill.
  2. Attach Cleaning Tool: Securely attach the desired cleaning brush or nozzle to the end of the flexible hose.
  3. Connect Power: Plug the power cord into a suitable electrical outlet (220V).

Operating Instructions

The BISSELL SpotClean Auto utilizes a "one spray, two brushes, three suctions" method for deep cleaning.

  1. Pre-treat (Optional): For heavily soiled areas, you may pre-treat the stain with a suitable cleaning solution.
  2. Spray: Hold the cleaning tool over the stained area. Press the trigger to spray the cleaning solution onto the fabric.
  3. Brush: Gently scrub the stained area with the brush attachment to agitate the dirt and allow the solution to penetrate.
  4. Vacuum: Release the spray trigger and slowly move the cleaning tool over the treated area, applying downward pressure. This will vacuum up the dirty solution and moisture. Repeat until the area is clean and as dry as possible.
Diagram illustrating the three-step cleaning process: spray, brush, and vacuum

Image: Diagram illustrating the three-step cleaning process: 1. Spray to dissolve stains, 2. Brush to scrub, 3. Suction to remove deep-seated dirt.

HeatWave Technology

This machine features HeatWave Technology, which helps maintain the water temperature during the cleaning process. This ensures that the cleaning solution remains effective for dissolving tough stains. You can add water up to 60°C.

Diagram showing HeatWave Technology maintaining constant hot water for cleaning

Image: Diagram illustrating HeatWave Technology, which maintains constant hot water (up to 60°C) for effective stain removal.

Applicable Surfaces

The BISSELL SpotClean Auto is suitable for a variety of fabric surfaces, including:

  • Sofas: Cotton, Velvet, Linen, Blended fabrics, Chenille, Flannel, Knitted fabrics, Tech fabric, Faux leather.
  • Carpets: Faux sheepskin, Cotton, Synthetic fiber, Blended carpets, Long pile, Short pile, Linen, Crawling mats.
  • Mattresses: Palm fiber, Spring, Sponge, Tatami, Baby mattresses, Cool mats.
  • Curtains: Silk/Short pile, Cotton/Hemp, Linen, Chenille, Polyester.
Chart showing various fabric types suitable for cleaning with the machine, including sofas, carpets, mattresses, and curtains

Image: Chart detailing various materials suitable for cleaning, such as different types of sofa fabrics, carpets, mattresses, and curtains.

Video Demonstration

Video: A demonstration of the BISSELL Handheld Washing Vacuum Cleaner in action, showing its effectiveness on various stains and surfaces.

Maintenance

  1. Empty and Clean the Sewage Tank: After each use, remove the sewage tank (the larger, clear tank) and empty the dirty water. Rinse the tank thoroughly with clean water.
  2. Clean the Nozzle/Brush: Remove any debris or hair from the cleaning nozzle and brush attachments. Rinse them under running water.
  3. Wipe Down the Unit: Wipe the exterior of the main unit with a soft, damp cloth.
  4. Storage: Ensure all tanks and attachments are dry before reassembling and storing the machine in a cool, dry place.
Image showing the dirty water tank after cleaning, indicating effective stain removal

Image: The sewage tank after use, demonstrating the amount of dirt extracted from the fabric.

Image showing the quick-dry design of the cleaning process, leaving surfaces almost dry

Image: The quick-dry design ensures that cleaned surfaces are left nearly dry, reducing drying time.

Troubleshooting

If you encounter issues with your BISSELL Handheld Washing Vacuum Cleaner, please refer to the following common solutions:

  • No Spray: Check if the fresh water tank is filled and correctly seated. Ensure the spray trigger is fully pressed.
  • Poor Suction: Verify that the sewage tank is not full and is properly installed. Check the hose and nozzle for blockages. Ensure the cleaning tool is making good contact with the surface.
  • Machine Not Turning On: Ensure the power cord is securely plugged into a working outlet. Check for any tripped circuit breakers.
  • Leaking: Ensure both fresh and sewage tanks are properly sealed and seated. Check hose connections for tightness.

For further assistance, please contact customer support.

Specifications

FeatureSpecification
Product NameCarpet Cleaner Machine
Model4720Z
Brand NameBISSELL (CNTONE listed in properties)
FunctionCloth, sofa, carpet cleaning, vacuuming (Wet and Dry)
Voltage220V
Power330W
Power Cord Length5 meters
Hose Length1.3 meters
Vacuum Suction Power10250Pa
Fresh Water Tank Capacity725ml
Sewage Tank Capacity1100ml
Maximum Noise76dB
Product Weight3.86kg
Product Dimensions (L*W*H)32.5cm * 16cm * 39cm
Dust Storage TypeAqua filter (Bagless)
InstallationHand Held

Image: Product parameters table from seller description, detailing specifications like voltage, power, tank capacities, and dimensions.

User Tips

  • For best results, always use the recommended cleaning solution for your BISSELL machine.
  • Test cleaning solutions on an inconspicuous area of the fabric first to ensure colorfastness.
  • Clean spills and stains as soon as possible for easier removal.
  • Regularly clean the dirty water tank and attachments to maintain optimal performance and prevent odors.

Warranty and Support

For warranty information, product support, or to purchase replacement parts and cleaning solutions, please contact the seller, Smart-life Appliances Store, or refer to the official BISSELL website. Keep your proof of purchase for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.