MT HELMETS FU404SV Atom 2 SV S

Contents

MT FU404SV Atom 2 SV S Helmet User Manual

Model: FU404SV Atom 2 SV S | Brand: MT HELMETS

Introduction

This manual provides essential information for the safe and effective use, maintenance, and care of your MT FU404SV Atom 2 SV S modular motorcycle helmet. Designed for optimal protection, comfort, and clear vision, this helmet incorporates advanced features for an enhanced riding experience. Please read this manual thoroughly before using your helmet.

Side view of the MT FU404SV Atom 2 SV S helmet with the main visor closed.
Figure 1: Side view of the MT FU404SV Atom 2 SV S helmet.

Safety Warnings

WARNING: No helmet can protect the user from all possible or foreseeable impacts. For optimal protection, the helmet must fit perfectly, and the chin strap closures must be properly anchored.

  • This helmet is designed to absorb the energy from an impact or accident. If the helmet sustains an impact, even if no visible damage is present, it must be replaced immediately as its protective capabilities may be compromised.
  • Do not apply paint, adhesives, gasoline, or other solvents to the surface of the helmet. These substances can degrade the helmet's materials and compromise its structural integrity, even if damage is not immediately visible.
  • An open-face helmet configuration (chin bar raised) does not protect the jaw in the event of a crash. Always ride with the chin bar in the closed and locked position for maximum protection.
  • Ensure the helmet fits snugly and comfortably without excessive pressure points. A helmet that is too loose may shift during an impact, reducing protection.
  • Always secure the chin strap firmly under your chin. The strap should be tight enough that you cannot remove the helmet by pulling it from the back.

Product Overview

The MT FU404SV Atom 2 SV S is a modular sport helmet engineered for both protection and rider comfort. Key features include:

  • Ultra-Efficient Protection: Sturdy structure and shock absorption capabilities.
  • Innovative Ventilation System: Multiple air channels for excellent air circulation, preventing heat and discomfort.
  • Clear and Sharp Vision: High-quality main visor with anti-fog function for optimal visibility.
  • Integrated Sun Visor: An internal drop-down sun visor for glare reduction.
  • Perfect and Comfortable Fit: Precise adjustment system for exceptional comfort without uncomfortable pressure.
  • Aerodynamic and Modern Design: Stylish appearance combined with functional design.
  • Safety Certifications: Meets required safety regulations and certifications.
Modular helmet with chin bar raised, revealing internal sun visor and interior padding.
Figure 2: The MT FU404SV Atom 2 SV S helmet in modular (open-face) configuration, showing the internal sun visor.

Setup and Fitting

  1. Initial Fit Check: Before riding, ensure the helmet fits correctly. It should feel snug around your head, cheeks, and jaw, without being uncomfortably tight or causing pressure points.
  2. Chin Strap Adjustment: Fasten the chin strap securely. The strap should be tight enough that you cannot pull the helmet off your head by rolling it forward or backward. There should be no slack in the strap.
  3. Visor Operation: Practice opening and closing the main clear visor. Ensure it latches securely in the closed position and stays open when raised.
  4. Internal Sun Visor: Locate the mechanism for the internal sun visor (typically a slider on the side or bottom edge of the helmet). Practice deploying and retracting it.
  5. Modular Chin Bar Operation: To raise the chin bar, locate the release mechanism (usually a button or lever near the chin bar). Press the release and lift the chin bar until it locks into the fully open position. To close, press the release again and push the chin bar down until it securely latches. Always ensure the chin bar is fully locked in either the open or closed position before riding.

Operating Instructions

Always wear your helmet correctly and securely for every ride.

  • Wearing the Helmet: Hold the helmet by the chin straps, spread the opening slightly, and slide your head into the helmet. Ensure your ears are not folded over.
  • Securing the Chin Strap: Fasten the chin strap buckle and adjust it so it is snug under your chin. It should not be loose enough to allow the helmet to move freely on your head.
  • Main Visor Use: The main clear visor protects your eyes from wind, debris, and insects. Keep it closed while riding for maximum protection. Use the anti-fog feature as needed.
  • Sun Visor Use: Deploy the internal sun visor in bright conditions to reduce glare. Retract it in low light or at night to maintain optimal visibility.
  • Ventilation System: The helmet features adjustable vents (typically on the chin bar and top of the helmet). Open these vents to increase airflow and cooling, and close them to reduce airflow or in cold/wet conditions.
  • Modular Function: While the modular function allows for convenience when stopped, remember to always ride with the chin bar fully closed and locked for maximum safety.

Maintenance

Proper maintenance will extend the life of your helmet and ensure its protective capabilities.

  • Exterior Cleaning: Clean the helmet shell with a soft cloth, warm water, and mild soap. Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the helmet's finish and materials.
  • Visor Cleaning: Clean the main visor and internal sun visor with a soft, damp cloth and mild soap. Rinse thoroughly with clean water and air dry. Do not use abrasive materials or chemicals that could scratch or damage the anti-fog coating.
  • Interior Padding: The interior comfort padding is often removable for cleaning. Refer to the helmet's specific design for removal instructions. Wash by hand with mild soap and water, rinse thoroughly, and air dry completely before reinserting.
  • Storage: Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the helmet.
  • Inspection: Regularly inspect your helmet for any signs of damage, such as cracks, deep scratches, or worn straps. If any damage is found, replace the helmet immediately.

Troubleshooting

ProblemPossible CauseSolution
Visor foggingLack of airflow, cold weather, high humidity.Ensure main visor is clean. Utilize the anti-fog feature. Open helmet vents to increase airflow. Consider anti-fog inserts if persistent.
Helmet feels too tight or uncomfortableIncorrect size, new helmet padding not yet broken in.Ensure you have the correct size. New padding will compress slightly over time. If discomfort persists, consult a professional for fit assessment.
Helmet feels too loose or moves on headIncorrect size, chin strap not properly secured.Ensure chin strap is snug. If the helmet still moves excessively, it may be too large and should be replaced with a smaller size.
Chin bar not locking securelyObstruction, mechanism malfunction.Check for any debris obstructing the locking mechanism. Ensure the chin bar is pushed firmly until it clicks into place. If the issue persists, discontinue use and seek professional inspection.

Specifications

FeatureDetail
BrandMT HELMETS
ModelFU404SV Atom 2 SV S
TypeModular Sport Helmet
ColorBlack
SizeS
VentilationOptimum Air Channels
VisorHigh-Quality, Anti-Fog, Clear Vision
Internal Sun VisorYes
SafetyMeets Safety Certifications
Package WeightApproximately 2.0 kg
Package Dimensions (L x W x H)Approximately 10 cm x 10 cm x 10 cm (Note: These are package dimensions, not helmet dimensions.)
Angled side view of the MT FU404SV Atom 2 SV S helmet, highlighting the 'MODULAR SPORT HELMET' branding.
Figure 3: Branding on the MT FU404SV Atom 2 SV S helmet.

User Tips

  • Regular Fit Check: Always perform a quick fit check before each ride to ensure the helmet is snug and the chin strap is secure.
  • Visor Care: Avoid touching the inside of the visor to preserve the anti-fog coating. Use only recommended cleaning methods.
  • Ventilation Adjustment: Experiment with the vent settings to find the optimal airflow for different riding conditions and temperatures.
  • Chin Bar Safety: While convenient, remember to always ride with the chin bar fully closed and locked for maximum protection. Only open it when stationary.
  • Helmet Lifespan: Helmets have a limited lifespan, typically 3-5 years from the date of manufacture or 5 years from the date of first use, whichever comes first. Materials can degrade over time, even without visible damage.

Warranty and Support

For any questions regarding your MT FU404SV Atom 2 SV S helmet, including warranty claims or technical support, please contact the seller or authorized MT HELMETS distributor. Keep your proof of purchase for warranty purposes.

Refer to the official MT HELMETS website or your point of purchase for specific warranty terms and conditions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.