MONSTER MH22193

Monster MH22193 Wireless Noise Reduction Earphones User Manual

Model: MH22193 | Brand: MONSTER

1. Introduction

The Monster MH22193 are high-quality wireless in-ear earphones designed for an immersive audio experience with advanced features. They incorporate Bluetooth 5.4 technology for stable and low-latency connections, AI intelligent noise reduction for clear calls, and a comfortable, lightweight design. This manual provides detailed instructions for the proper use and maintenance of your earphones.

2. Package Contents

Please check the box for the following items:

  • Earphones (2 units)
  • Charging Case (1 unit)
  • TYPE-C Charging Cable (1 unit)
  • Instruction Manual (1 unit)
  • Warranty Card (1 unit)
  • Certificate of Conformity (1 unit)
  • Packaging Box (1 unit)
Contents of the Monster MH22193 earphone package
Figure 2.1: Packaging List Details

3. Specifications

FeatureSpecification
BrandMONSTER
ModelMH22193
Wearing StyleIn-ear
MaterialPlastic
Earphone Weight (single)Approx. 4 grams
Total Weight30g
Bluetooth Version5.4
Wireless TypeBluetooth
CommunicationWireless
Maximum Wireless Range<10m
Driver Diameter10mm
Number Of Drivers10
Vocalism PrincipleDynamic
Frequency Response Range20 - 20000Hz
Earphone Battery Capacity35mAh
Charging Case Battery Capacity300mAh
Battery Life (with charging case)Up to 20 hours
Single Charge Playtime (50% volume)Approx. 5 hours
Talk Time (50% volume)Approx. 4 hours
Charging TimeApprox. 1 hour
Charging MethodCharging case, Type-C (5V/0.5A)
Waterproof RatingIPX5 (Earphones), Charging case is not waterproof
MicrophoneYes
Volume ControlYes
Control ButtonYes
Active Noise-CancellationNo
Sound IsolatingNo
OriginMainland China
Detailed product parameters table for Monster MH22193
Figure 3.1: Product Parameters

4. Setup

4.1 Charging the Earphones and Case

Before first use, fully charge the earphones and charging case. Place the earphones into the charging case. Connect the Type-C charging cable to the charging port on the case and a suitable power source (5V/0.5A). The charging case will indicate charging status. A full charge for the case and earphones takes approximately 1 hour.

Diagram showing charging times for Monster MH22193 earphones and case
Figure 4.1: Battery Life and Charging Times

4.2 Bluetooth Pairing

  1. Ensure the earphones are charged.
  2. Open the charging case. The earphones will automatically enter pairing mode.
  3. On your device (smartphone, tablet, computer), enable Bluetooth.
  4. Search for available Bluetooth devices and select "Monster MH22193" from the list.
  5. Once connected, you will hear a confirmation tone, and the earphones will be ready for use.

The earphones feature Bluetooth 5.4 for improved transmission speed, reduced sound quality loss, and low latency.

Diagram illustrating benefits of Bluetooth 5.4 technology
Figure 4.2: New Bluetooth SIG5.4 Features

5. Operating Instructions

5.1 Touch Controls

The Monster MH22193 earphones feature sensitive touch controls for easy management of music and calls without needing to access your phone.

ActionFunction
Tap once (Right ear)Volume +
Tap once (Left ear)Volume -
Double tap (Left/Right ear)Play/Pause music
Double tap (Left/Right ear)Answer/End call
Tap three times (Left ear)Previous song
Tap three times (Right ear)Next song
Long press for two seconds (Left/Right ear)Wake up voice assistant
Long press for two seconds (Left/Right ear)Reject incoming call
Diagram of touch control gestures for Monster MH22193 earphones
Figure 5.1: Sensitive Touch Controls

5.2 Making and Receiving Calls

The earphones support HD calls with AI intelligent noise reduction, effectively suppressing peripheral noise and call echo for clear communication.

  • Answer Call: Double tap either earphone.
  • End Call: Double tap either earphone.
  • Reject Call: Long press either earphone for two seconds.
Man wearing Monster MH22193 earphones, illustrating AI intelligent noise reduction
Figure 5.2: AI Intelligent Noise Reduction for Calls

5.3 Music Playback

Enjoy HIFI sound quality with the 10mm medium driver unit and composite titanium nano-diaphragm, delivering rich and clear audio.

  • Play/Pause: Double tap either earphone.
  • Next Song: Tap the right earphone three times.
  • Previous Song: Tap the left earphone three times.
  • Volume Up: Tap the right earphone once.
  • Volume Down: Tap the left earphone once.
Exploded view of earbud driver unit, highlighting 10mm driver and composite titanium nano-diaphragm
Figure 5.3: HIFI Sound Quality Components

6. Maintenance

6.1 Cleaning

  • Gently wipe the earphones and charging case with a soft, dry, lint-free cloth.
  • Avoid using abrasive materials, solvents, or chemical cleaners.
  • Ensure charging contacts are clean and free of debris for optimal charging.

6.2 Water Resistance

The earphones are rated IPX5 waterproof, meaning they can resist a sustained, low-pressure water jet spray. This makes them suitable for daily use and resistant to sweat and rain during exercise.

Important: The charging case is NOT waterproof. Do not expose the charging case to water or moisture.

Woman running, demonstrating IPX5 waterproof feature for daily use
Figure 6.1: IPX5 Waterproof for Daily Use

7. Troubleshooting

  • Earphones not pairing:
    Ensure both earphones are in the charging case and fully charged. Open the case to initiate pairing mode. Turn off and on your device's Bluetooth, then try searching again.
  • Only one earphone working:
    Place both earphones back into the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs them. If the issue persists, try resetting the earphones (refer to the full instruction manual if available for specific reset procedures).
  • No sound or low volume:
    Check the volume levels on both your connected device and the earphones. Ensure the earphones are properly seated in your ears. Try disconnecting and reconnecting the Bluetooth connection.
  • Charging issues:
    Verify that the Type-C cable is securely connected to both the charging case and the power source. Ensure the charging contacts on the earphones and inside the case are clean. Try a different charging cable or power adapter.
  • Uncomfortable fit:
    The earphones come with shark fin-style ear wings and skin-friendly silicone material for comfort. Experiment with different ear tip sizes if provided, or adjust the ear wings for a secure and comfortable fit.

8. User Tips

  • For optimal sound quality and noise reduction, ensure a snug fit in your ear canal.
  • Regularly clean the ear tips and charging contacts to maintain performance and hygiene.
  • Keep the charging case charged to ensure your earphones are always ready for use, especially when on the go.
  • While the earphones are IPX5 waterproof, avoid submerging them in water or exposing them to high-pressure water jets.

9. Warranty and Support

Your Monster MH22193 earphones come with a Warranty Card included in the package. Please refer to the Warranty Card for details regarding warranty coverage and terms. For further assistance or support, please contact the seller or refer to the official Monster support channels.

Related Documents - MH22193

Preview Monster N-Lite 206 Quick Start Guide
Quick start guide for Monster N-Lite 206 wireless earphones, covering product overview, power, charging, pairing, volume control, calls, music playback, voice control, reset, and important cautions.
Preview Monster Clarity Open Air Wireless Earbuds - User Manual & Product Information
Comprehensive guide to the Monster Clarity Open Air wireless earbuds, featuring an open-ear design, IPX5 sweatproof rating, ENC noise cancellation, 6+ hours playtime, Bluetooth connectivity, and a 2-year limited warranty. Includes setup, operation, and support details.
Preview Monster MH12005 In-ear Earphones Quick Start Guide
Quick start guide for Monster MH12005 In-ear Earphones, covering product overview, charging, pairing, call and music controls, indicator lights, and FCC compliance information. Learn how to set up and use your Monster Achieve 300 AirLinks wireless earbuds.
Preview Monster Mobile Jamz: High Performance Music Phone Headphones - User Manual & Guide
Discover the Monster Mobile Jamz, high-performance in-ear headphones designed for music phones. This guide covers product features, safe listening practices, usage instructions, care, and warranty information.
Preview Monster N-Lite 206 Bluetooth Headphones Quick Start Guide
A comprehensive guide to setting up and using your Monster N-Lite 206 Bluetooth headphones, including pairing, controls, and troubleshooting.
Preview Monster Aria Free Quick Start Guide - Wireless Open Ear Headphones
Get started quickly with the Monster Aria Free open-ear wireless headphones. This guide covers charging, pairing, controls, and wearing instructions for model MH22134.