Introduction
Thank you for choosing the SMAEL 8105 Digital Sports Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch. Please read it carefully to ensure proper use and to enjoy all the features this watch has to offer.

Front view of the SMAEL 8105 digital watch, displaying time, date, week, and water resistance.
Product Features
- Digital LED Display
- 50M Water Resistance (5ATM)
- Stopwatch (1/100s Chronograph)
- Alarm Function
- Night Light Display (Cold Light Bond)
- Week Calendar
- Chime Function
- Wear-resistant mirror surface
- Hard case, sweat-absorbing and moisture-proof
- TPU strap with stainless steel buckle
Watch Overview and Button Functions
Your SMAEL 8105 watch features four buttons: LIGHT, MODE, START, and RESET. Understanding their functions is key to operating your watch.

Diagram illustrating the watch's buttons and their functions.
Button Functions:
- LIGHT: Activates the LED backlight for visibility in low light conditions.
- MODE: Cycles through different display modes (Time, Alarm, Stopwatch).
- START: Used to start/stop functions in Stopwatch mode, or adjust settings in setting modes.
- RESET: Used to reset functions in Stopwatch mode, or confirm settings in setting modes.
Setup and Operation
1. Initial Setup
Upon first use, or after a battery change, the watch may display a default time. You will need to set the current time and date.
2. Setting Time and Date
- Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
- Use the START button to adjust the flashing digit (hours, minutes, year, month, day).
- Press the RESET button to move to the next digit or setting.
- Once all settings are correct, press the MODE button to exit the setting mode and return to normal time display.
3. Using the Stopwatch
- Press the MODE button until the stopwatch mode is displayed (indicated by 'CHRONO' or 'SPORTS' on the display).
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to clear the stopwatch to zero.
- To resume timing after pausing, press START.
4. Setting and Using the Alarm
- Press the MODE button until the alarm setting mode is displayed (indicated by 'ALARM' or a bell icon).
- Use the START button to adjust the alarm hour.
- Press the RESET button to move to the alarm minute setting.
- Use the START button to adjust the alarm minute.
- Press the MODE button to exit the alarm setting mode.
- To turn the alarm ON/OFF, in the alarm display mode, press the START button. An alarm icon will appear/disappear to indicate its status.
5. Using the Night Light
Press the LIGHT button at any time to illuminate the display for a few seconds, making it visible in dark environments.
Maintenance
Water Resistance
The SMAEL 8105 watch is water-resistant up to 50 meters (5ATM). This means it is suitable for daily use, showering, and swimming in shallow water. However, it is NOT suitable for diving or snorkeling. Do not operate buttons while the watch is wet or submerged to prevent water ingress.

The watch is water-resistant up to 50 meters.
Cleaning
To clean your watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the case or strap. For the silicone band, mild soap and water can be used.
Battery Replacement
The watch is powered by a battery. When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.

Waterproof electroplated stainless steel back cover and TPU strap with stainless steel buckle.
Troubleshooting
Display is blank or dim:
- Check the battery. It may need replacement.
- Ensure the watch has not been exposed to extreme temperatures.
Buttons are unresponsive:
- Ensure the watch is not wet. Water can interfere with button operation.
- Try pressing the buttons firmly.
- If the issue persists, a soft reset (removing and reinserting the battery) might be necessary, but this should be done by a professional.
Time is inaccurate:
- Re-set the time and date following the instructions in the 'Setup and Operation' section.
- If the inaccuracy continues, the battery may be low or the internal movement might require servicing.
Specifications

Key features and specifications of the SMAEL 8105 watch.
| Attribute | Detail |
|---|---|
| Brand Name | SMAEL |
| Model | 8105 |
| Item Type | Digital Wristwatches |
| Style | Fashion & Casual |
| Movement | Digital (Electronic Movement, Japan) |
| Display Type | Digital (LED Display) |
| Case Material | Plastic |
| Band Material Type | Silicone |
| Clasp Type | Deployment Buckle |
| Water Resistance Depth | 5Bar (50M) |
| Mirror Material | PMMA |
| Bottom Cover Material | Stainless Steel |
| Dial Diameter | 46mm |
| Dial Thickness | 16mm |
| Band Width | 22mm |
| Total Length of the watch | 254mm |
| Wearing Range | 140mm-230mm |
| Weight | 49g |
User Tips
- Battery-Powered: This watch operates on a battery and does not require charging. Eventually, the battery will need to be replaced.
- Stopwatch Functionality: The 1/100s chronograph (stopwatch) is designed for precise timing and can track durations for extended periods, including hours, minutes, and seconds.
- Water Resistance Care: Always ensure the watch buttons are not pressed when the watch is wet or submerged to maintain its 50M water resistance.
Warranty and Support
For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.