Aramox Rechargeable LED Flood Light 100W

Contents

Aramox Rechargeable LED Flood Light 100W Instruction Manual

Model: Rechargeable LED Flood Light 100W

1. Introduction

Thank you for purchasing the Aramox Rechargeable LED Flood Light. This portable and powerful floodlight is designed for various outdoor and indoor applications, offering high brightness, multiple lighting modes, and robust protection against environmental elements. Please read this manual carefully before use to ensure proper operation and longevity of your device.

2. Package Contents

Verify that all items listed below are included in your package:

  • 1 x Portable LED Flood Light
  • 1 x Adjustable Bracket
  • 1 x Knob for Bracket Adjustment
  • 1 x USB Charging Cable
  • 1 x AC Power Adapter (for wall charging)
  • 1 x Car Lighter Plug (for car charging)
  • 2 x Washers (for bracket assembly)
Aramox Rechargeable LED Flood Light and its accessories including USB cable, AC adapter, and car charger.
Figure 2.1: Contents of the package, showing the flood light, USB cable, AC adapter, and car lighter plug.

3. Specifications

FeatureDetail
Item TypePortable Spotlight / Flood Light
MaterialDie Cast Aluminum, Tempered Glass
Lamp Body SizeApprox. 225 x 330 x 60mm (8.9 x 13 x 2.4in)
LED Beads144PCS 5730
Power100W
Luminous Flux9000LM
Color Temperature6500K (Cold White)
Luminous Angle120°
Waterproof GradeIP65
Battery Type1 x 3.2V 10000mAh rechargeable lithium battery (built-in)
Battery Life6-10 hours (depending on mode)
Input VoltageAC100-240V
High-concerned chemicalNone
Batteries IncludedYes
Diagram showing the dimensions of the flood light: 223mm width, 182mm height, 60mm depth.
Figure 3.1: Product dimensions.
Back view of the flood light showing a label with CE and RoHS certifications.
Figure 3.2: Rear view of the flood light with regulatory markings.

4. Setup

4.1 Assembling the Bracket

  1. Attach the adjustable bracket to the main body of the flood light using the provided knob and washers. Ensure the knob is tightened securely to prevent wobbling.
  2. Adjust the angle of the flood light by loosening the knob, tilting the light to the desired position, and then re-tightening the knob.
Side view of the flood light showing the adjustable stand and handle.
Figure 4.1: Side view illustrating the adjustable bracket.

4.2 Initial Charging

Before first use, fully charge the flood light. The built-in lithium battery has a life of 6-10 hours on a full charge.

  • Using AC Adapter: Connect the USB charging cable to the flood light's charging port and the AC power adapter. Plug the adapter into a standard wall outlet (AC100-240V).
  • Using Car Lighter Plug: Connect the USB charging cable to the flood light's charging port and the car lighter plug. Insert the car lighter plug into your vehicle's cigarette lighter socket.

The charging indicator (if present, refer to product for exact location) will typically show red during charging and turn green when fully charged.

5. Operation

5.1 Power On/Off and Mode Selection

The flood light features a single switch for power control and mode selection. Press the switch repeatedly to cycle through the available lighting modes:

  1. Strong Light: Provides maximum brightness (9000LM) for extensive illumination.
  2. Weak Light: Offers reduced brightness for longer battery life or less intense lighting needs.
  3. Red and Blue Flashing: An emergency or warning signal mode.
  4. Off: Turns the light off.
The flood light emitting a bright white light in a dark environment.
Figure 5.1: Flood light in operation, demonstrating its illumination capability.

5.2 Adjusting Light Angle

The flood light can be tilted to direct illumination precisely where needed. Loosen the knob on the side of the bracket, adjust the light head to the desired angle, and then firmly tighten the knob to secure it.

6. Maintenance

  • Cleaning: Wipe the flood light with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the casing or tempered glass.
  • Storage: When not in use for extended periods, store the flood light in a cool, dry place. It is recommended to fully charge the battery every 3-6 months to maintain battery health.
  • Battery Care: The built-in lithium battery is not user-replaceable. Avoid exposing the device to extreme temperatures.
  • Waterproof Seal: Ensure the charging port cover (if applicable) is securely closed when not charging to maintain IP65 waterproof integrity.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Battery is depleted.Charge the flood light using the provided USB cable and adapter/car charger.
Light is dim or flickers.Low battery charge.Recharge the battery.
Charging is not working.Faulty cable, adapter, or power source.Try a different USB cable, adapter, or power outlet/car socket. Ensure connections are secure.
Water ingress despite IP65 rating.Charging port cover not properly sealed.Ensure all covers and seals are properly closed and intact. IP65 protects against water jets, not prolonged submersion.

8. User Tips

  • Upon receiving your product, carefully inspect the packaging and the flood light for any signs of damage.
  • For optimal performance, ensure the light is fully charged before taking it to remote locations without access to power.
  • Utilize the weak light mode when less intense illumination is sufficient to extend battery life.

9. Warranty and Support

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact the seller or manufacturer directly. Keep your purchase receipt or order number handy for faster service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.