Dareu EK87pro

Contents

Dareu EK87pro Mechanical Keyboard User Manual

Model: EK87pro

1. Introduction

Thank you for choosing the Dareu EK87pro Mechanical Keyboard. This high-performance keyboard is designed for e-sports gaming and general use, featuring a three-mode connection (Wired, 2.4G Wireless, Bluetooth 5.1), hot-swappable switches, low latency, and vibrant RGB lighting. This manual will guide you through the setup, operation, and maintenance of your new keyboard to ensure optimal performance and longevity.

2. Product Overview

Key Features

  • Three-Mode Connectivity: Seamlessly switch between Wired (Type-C), 2.4G Wireless, and Bluetooth 5.1 for versatile use across multiple devices.
  • 87-Key Layout: A compact yet functional layout that saves desktop space while retaining essential keys for gaming and productivity.
  • True Gasket Structure: Multi-layer filling liner with 12 high-toughness silicone sleeves, combined with a polymer positioning plate, provides superior shock mitigation and noise elimination for a purer percussion sound and softer hand feel.
  • Full Key Hot-Swap: Easily replace switches without soldering, allowing for customization of your typing experience.
  • Low Latency E-sports Chip: Achieves a wireless delay as low as 1ms, with self-adaptive anti-jitter technology to reduce accidental double-clicks.
  • Lower Lamp Position RGB: Features approximately 16 million colors and 18 kinds of drive-free lighting modes, suitable for a wide range of keycaps.
  • PBT Side Engraved Keycaps: Ergonomically designed PBT keycaps with side engravings for durability and comfort.
  • 4000mAh Lithium Battery: Provides long-lasting wireless usage.

Components

The EK87pro keyboard features a sophisticated internal structure designed for performance and comfort.

True Gasket Structure Diagram
Figure 1: True Gasket Structure Diagram
This diagram illustrates the internal layers of the keyboard, including (1) Upper cover, (2) Key cap, (3) Mechanical shaft, (4) Polymer positioning plate, (5) Structural silicone sleeve, (6) Latex foam, (7) Shaft lower pad, (8) PET acoustic cushion, (9) PCB, (10) Latex foam on the back, (11) Receiver, (12) EVA sponge, and (13) Lower cover.
PCB Single Key Slot Detail
Figure 2: PCB Single Key Slot
The PCB features a 1.2mm single key slotting design for improved consistency and soft elastic feel during typing or gaming.
Polymer Positioning Plate Detail
Figure 3: Polymer Positioning Plate
A 1.5mm thick polymer positioning plate ensures a balance between soft elasticity and stability, contributing to a purer sound and softer hand feel.

3. Specifications

Product Parameters Table
Figure 4: Product Parameters
ParameterDetail
Bluetooth NameEK87 Pro
ConnectivityWired (Type-C) / 2.4G Wireless / Bluetooth 5.1
Key Layout87 keys
Axis OptionsYunxiao Axis, Dream Hifi Axis, Master Axis
Keycap MaterialPBT Side Engraved Keycap (Original Height)
Backlight TypeLower lamp position RGB (18 lamp effects)
Positioning PlatePolymer positioning plate
Battery4000mAh Lithium Battery
Charging Current360mA (approximately 10 hours for full charge)
Power Consumption (Wired)≤ 60mA (no light) / ≤ 200mA (backlight brightest)
Power Consumption (Wireless)≤ 50mA (no light) / ≤ 180mA (backlight brightest)
Dimensions364mm x 136mm

Axis Specifications

Axis Types and Specifications
Figure 5: Available Axis Types and Specifications
Axis TypeShaft FeelAxle LifeTrigger PressureTrigger TravelTotal StrokeRecommended Scene
Yunxiao AxisLinear feel70 million times42±5gfN/A3.4±0.4mmGame/Office/Home
Dream Hifi AxisLinear feel50 million times40±10gf2.0±0.4mm4.0±0.4mmGame/Office/Home
Master AxisLinear feel50 million times45±5gf2.0±0.5mm3.4±0.4mmGame/Code Word

4. Setup

Initial Charging

Before first use, it is recommended to fully charge the keyboard. Connect the keyboard to a USB power source using the provided Type-C cable. A full charge takes approximately 10 hours.

4000mAh Lithium Battery Life
Figure 6: Battery Life Overview
The 4000mAh battery provides approximately 20 days of use with lights off and 6 days with lights on (based on 4 hours of continuous use per day).

Connecting the Keyboard

The EK87pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth 5.1.

Three-Mode Connection Diagram
Figure 7: Three-Mode Connection Options
The keyboard supports Bluetooth 5.1, 2.4G Receiver, and Type-C wired connections.

Wired Mode (Type-C)

  1. Connect the provided Type-C cable to the keyboard's Type-C port.
  2. Connect the other end of the cable to an available USB port on your computer.
  3. The keyboard will be automatically recognized and ready for use.

2.4G Wireless Mode

  1. Locate the 2.4G USB receiver (usually stored in a compartment on the keyboard).
  2. Plug the 2.4G USB receiver into an available USB port on your computer.
  3. Switch the physical mode switch on the keyboard to '2.4G' mode.
  4. The keyboard should connect automatically.

Bluetooth 5.1 Mode

  1. Switch the physical mode switch on the keyboard to 'BT' (Bluetooth) mode.
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. Select 'EK87 Pro' from the list of available devices to pair.
  4. Follow any on-screen prompts to complete the pairing process.

5. Operating Instructions

Switching Connection Modes

Use the physical switch located on the keyboard to toggle between Wired, 2.4G Wireless, and Bluetooth modes. For optimal gaming performance, a wired or 2.4G wireless connection is recommended due to lower latency.

Physical Switch for Connectivity
Figure 8: Physical Switch for Wired/2.4G/Bluetooth
The keyboard features a physical switch to easily change between connection types.

RGB Lighting Control

The EK87pro features lower lamp position RGB lighting with 18 different drive-free lighting modes. Specific key combinations (e.g., Fn + key) are typically used to cycle through lighting effects, adjust brightness, and change colors. Refer to the keyboard's function key legends or a dedicated software (if available) for detailed control.

Lower Lamp Position RGB
Figure 9: Lower Lamp Position RGB
The RGB backlight with a large light guide offers approximately 16 million colors and 18 lighting modes.

Function Indicators

The keyboard includes function indicators to show current status, such as battery level, connection mode, or Caps Lock status.

Two-Stage Foot Support

The keyboard is equipped with two-stage adjustable foot supports for ergonomic typing angles.

6. Hot-Swap Switches

The EK87pro supports full key hot-swapping, allowing you to easily change the mechanical switches without soldering. This feature enables customization of your keyboard's feel and sound.

Full Key Hot Plug Feature
Figure 10: Full Key Hot Plug
Freely replace the shaft body and customize your keyboard to suit your usage habits.

How to Replace Switches:

  1. Gently remove the keycap using a keycap puller.
  2. Use a switch puller to carefully grip the switch and pull it straight up.
  3. Align the pins of the new switch with the holes on the PCB.
  4. Press the new switch firmly into place until it clicks. Ensure the pins are not bent.
  5. Replace the keycap.

The factory comes with fine-tuned stabilizers (self-spindle) to ensure balanced key presses for larger keys.

Multiple Fine-Tuning Self-Spindle
Figure 11: Multiple Fine-Tuning Self-Spindle
The factory lubricates and adjusts the satellite shaft and balance bar for balanced large key feel.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the keyboard surface. For deeper cleaning, remove keycaps and use compressed air to clear dust and debris from between switches.
  • Keycap Care: PBT keycaps are durable but can be cleaned with mild soap and water if necessary. Ensure they are completely dry before reattaching.
  • Battery Care: Avoid fully discharging the battery frequently. Charge the keyboard regularly to maintain battery health.
  • Storage: When not in use for extended periods, store the keyboard in a cool, dry place.

8. Troubleshooting

  • Keyboard not responding: Ensure the keyboard is properly connected (wired, 2.4G receiver, or Bluetooth paired). Check the battery level if in wireless mode.
  • Keys not registering: If specific keys are not working, try reseating the keycap and switch. If the issue persists, the switch may need replacement.
  • RGB lighting not working: Check if the lighting is turned off or set to a very low brightness. Cycle through lighting modes using the designated function keys.
  • Wireless connection issues: For 2.4G, ensure the receiver is securely plugged in and the keyboard is in 2.4G mode. For Bluetooth, ensure the keyboard is in pairing mode and your device's Bluetooth is enabled. Try re-pairing if necessary.
  • Lag in wireless mode: Ensure the keyboard is within range of the receiver/device. For gaming, consider using wired mode or 2.4G wireless for the lowest latency.

9. User Tips

  • Optimal Gaming: For competitive gaming, use the wired connection or the 2.4G wireless mode to benefit from the 1ms low latency chip.
  • Customization: Experiment with different hot-swappable switches to find the perfect feel for typing or gaming.
  • Battery Management: To extend battery life, consider turning off RGB lighting when not needed, especially during long wireless sessions.
  • Ergonomics: Utilize the two-stage foot support to find a comfortable typing angle that reduces wrist strain.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.