1. Product Overview
The Aigo TU01 is a True Wireless Stereo (TWS) Bluetooth headset designed for high-quality audio, clear calls, and extended usage. It features Environmental Noise Cancellation (ENC) for calls, Bluetooth 5.4 for stable connectivity, and a durable, ergonomic design.

Figure 1: Aigo TU01 Wireless Bluetooth Headset
Key Features:
- ENC Dual Microphone Noise Reduction for clear calls
- New Bluetooth 5.4 for high transmission efficiency and stable performance
- Unique Sliding Cover Design for easy access
- IP56 Waterproof rating, resistant to sweat and rain
- Up to 56 hours of extended battery life with charging case
- 10mm Dynamic Driver for deep sound effects
- Ultra-low latency for gaming (Esports mode)
- Ergonomic design for comfortable wear
- Light press control for easy operation
- Portable lanyard design for convenience
2. Package Contents
Please check the package for the following items:
- Aigo TU01 Wireless Bluetooth Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- User Manual
3. Setup and Charging
3.1 Initial Charging
Before first use, fully charge the earbuds and the charging case.
- Place the earbuds into the charging case.
- Connect the USB Type-C charging cable to the charging port on the case and a power source.
- The indicator lights on the charging case will show the charging status.
- A full charge for the charging case takes approximately 2 hours.
3.2 Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on. Alternatively, press and hold the touch control area on both earbuds for a few seconds.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically disconnect and power off. Alternatively, disconnect them from your device, and they will power off after a few minutes of inactivity.
3.3 Bluetooth Pairing
To connect your Aigo TU01 headset to a device:
- Ensure the earbuds are charged and powered on.
- Open the charging case. The earbuds will enter pairing mode (indicator lights may flash).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices and select "aigo TU01" from the list.
- Once connected, the earbuds will indicate successful pairing (e.g., a voice prompt or steady indicator light).
Video 1: Demonstrates unboxing, wearing, music playback, gaming, call handling, and Bluetooth connection.
4. Operating Instructions
4.1 Wearing the Earbuds
The Aigo TU01 earbuds feature an ergonomic design for a comfortable and secure fit. Gently insert each earbud into your ear canal and rotate slightly until it feels snug.
4.2 Touch Controls
The earbuds are equipped with light press touch controls. Specific functions may vary slightly depending on your device and application, but common controls include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold on either earbud.
- Activate Voice Assistant: Triple tap on either earbud (if supported by your device).
- Toggle Gaming Mode: (Refer to specific instructions if provided by the manufacturer for this model, as it's a specialized feature).

Figure 2: Light Press Control Area
4.3 Call Functionality
The Aigo TU01 features ENC (Environmental Noise Cancellation) with dual microphones to ensure clear voice transmission during calls, even in noisy environments.
4.4 Gaming Mode
For an enhanced gaming experience, the earbuds offer an ultra-low latency mode. Activate this mode (refer to touch controls or app settings if available) to minimize audio delay during gameplay.

Figure 3: Gaming Mode and Key Features
5. Maintenance
5.1 Cleaning
- Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
- Do not use harsh chemicals or abrasive materials.
- Ensure the charging case is also clean and free of debris.
5.2 Water Resistance
The Aigo TU01 earbuds are rated IP56 waterproof, meaning they are protected against dust ingress and high-pressure water jets from any direction. They are suitable for use during workouts and in light rain, but should not be submerged in water.

Figure 4: IP56 Water Resistance
5.3 Storage
When not in use, store the earbuds in their charging case to protect them and ensure they remain charged.
6. Troubleshooting
6.1 Earbuds Not Pairing
- Ensure both earbuds are charged and powered on.
- Turn off Bluetooth on your device, then turn it back on.
- Forget the