1. Introduction
The PowMr Battery Equalizer is designed to maintain voltage balance for batteries connected in series or parallel, extending their lifespan and ensuring optimal performance. It features an intelligent voltage balancing system that automatically adjusts to prevent over-charging or under-charging of individual battery cells.
This equalizer is suitable for various battery configurations in applications such as cars, boats, motorcycles, and solar cells.
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always ensure proper ventilation when working with batteries. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection. Disconnect power sources before making any connections.
3. Product Features
- Battery Protection: Intelligent voltage balancing system keeps the battery in sleep mode and automatically shuts down when voltage is insufficient, extending battery life.
- Extended Battery Life: Maintains charge and discharge balance between batteries connected in series or parallel, keeping them healthy and prolonging their service life.
- Versatile Connectivity: The 24V equalizer can connect two 12V lead-acid (AGM, Gel, Flood) batteries as standard. For 24V or higher voltage battery packs, multiple equalizers can be connected in parallel.
- Durability: Features reverse polarity protection and undervoltage isolation to ensure longer battery life.
- Wide Application: Can be used in various battery configurations for cars, boats, motorcycles, and solar cells.
- Applicable Battery Types: Lead Acid (Sealed=AGM, Flooded, Gel, Calcium), LiFePO4, NiCd, NiMH batteries.

4. Setup and Installation
4.1 General Wiring Guidelines
- Wire Color: Red wire for positive (+) pole, Black wire for negative (-) pole.
- Caution: Avoid any of the terminals touching each other during installation.
- The equalizer is applicable to Lead Acid Battery, LiFePO4 Battery, NiCd/NiMH.

4.2 Connecting the Battery Equalizer
Connect the battery equalizer to your battery bank as follows:
- Connect the Red cable to the Battery positive (+) pole.
- Connect the Black cable to the Battery negative (-) pole.
- For multi-battery systems, the White cable connects to the middle connection point of two batteries (either Battery negative pole or Battery positive pole, depending on the specific configuration).
4.3 Wiring Diagrams for Common Configurations



5. Operation
The battery equalizer automatically begins operation when batteries are connected in series and the voltage difference between them exceeds 10 mV. It continuously monitors and adjusts the voltage to ensure balance across all connected batteries.
The equalizer is designed for long-term connection to achieve automatic battery equalization. It functions with single cells ranging from 2.4V to 12V. If fewer than four batteries are connected, any unused cables should be left unconnected, ensuring positive and negative terminals do not touch.
5.1 Interface Description (BE24-N Example)

- Balanced Working State Area:
- A stands for high voltage group.
- B stands for low voltage group.
- Under Voltage Warning Area:
- A represents under voltage of high voltage area.
- B represents under voltage of low voltage group.
- LED Power Indicator: Indicates the power status of the equalizer.
- LE Switch: (Likely LED Switch) Controls the LED indicators.
6. Maintenance
- Regularly inspect all cable connections to ensure they are secure and free from corrosion.
- Keep the equalizer clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Ensure the operating environment is within the specified temperature range (-7.6°F to 131°F).
- Periodically check the battery terminals for cleanliness and tightness.
- If the equalizer is exposed to harsh conditions, consider a protective enclosure.
7. Troubleshooting
7.1 Equalizer Not Functioning
- Check Connections: Ensure all positive, negative, and middle point connections are correctly made and secure.
- Verify Battery Voltage: Confirm that the individual battery voltages are within the operating range (above 2.4V per cell).
- Inspect for Damage: Look for any visible damage to the equalizer or its cables.
7.2 Imbalance Persists
- Check Battery Health: A severely degraded or faulty battery may prevent effective balancing. Test individual batteries if possible.
- Voltage Difference: The equalizer activates when the voltage difference exceeds 10mV. If the difference is smaller, it might not actively balance, but this is normal.
- Overload: Ensure the compensation current (0-5A for BE24-N, 0-10A for BE48-N) is sufficient for your battery bank size.
8. Specifications

| Feature | BE24-N | BE48-N |
|---|---|---|
| Battery Nominal Voltage | 2*12V | 4*(2.4V/3.6V/6V/9V/12V) |
| Optimizing Current | 0-5A | 0-10A |
| Quiescent Current | <3mA | 5mA (12V) 1.2mA (12V) |
| Dimensions (L x W x H) | 78 x 78 x 28 mm | 69 x 129 x 28 mm |
| Protection | Reverse polarity protection | Reverse polarity protection |
| Low Voltage Disconnect | 10V | 1.8V |
| Operating Temperature | -7.6°F to 131°F (-22°C to 55°C) | |
| Supported Battery Types | Lead-Acid (Sealed=AGM, Flooded, Gel, Calcium), Lithium Battery, Nickel Cadmium Secondary Batteries, Nickel-metal Hydride Secondary Batteries | |
9. User Tips
- Model Selection: Ensure you select the correct model (BE24-N or BE48-N) that matches your battery system's voltage requirements. The 24V version is designed for 2x12V batteries, while the 48V version supports up to 4 batteries in various voltage configurations.
- System Compatibility: While versatile, always double-check compatibility with your specific battery chemistry and system voltage before installation.
- Long-Term Connection: For best results, keep the equalizer connected to your battery bank continuously. It is designed for automatic, long-term balancing.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.