INMO AR Ring Wireless Control Ring User Manual

1. Introduction

The INMO AR Ring is a wireless control device designed to enhance the interaction experience with INMO Air and INMO Air2 smart glasses. This compact and ergonomic ring supports multiple interaction modes, including touch, ring gestures, and voice commands, providing seamless control over your smart glasses.

2. Specifications

3. Package Contents

Ensure all items are present in the package:

• 1 x INMO AR Ring (Model IMR02)
• 1 x USB Charging Cable
• 1 x User Manual (this document)

4. Setup

4.1 Charging the Device

Before initial use, fully charge your INMO AR Ring. Connect the provided USB charging cable to the ring's charging port and plug the other end into a compatible USB power source (e.g., computer USB port, wall adapter). The input power requirement is 5V — 50mA.

4.2 Pairing with INMO Smart Glasses

The INMO AR Ring supports wireless connection. To pair the ring with your INMO Air or INMO Air2 smart glasses, please follow the specific pairing instructions provided with your smart glasses. Typically, this involves activating Bluetooth or a similar wireless pairing mode on both devices and confirming the connection.

5. Operating Instructions

The INMO AR Ring offers intuitive control through various interaction modes:

• Touch Mode: Utilize the touch-sensitive surface on the ring for navigation and selection. The image suggests directional controls (up, down, left, right) and a central button for confirmation or primary actions.
• Ring Gestures: Perform specific hand or finger movements while wearing the ring to trigger commands. Refer to your INMO smart glasses manual for a detailed list of supported gestures.
• Voice Mode: Some functionalities may be controllable via voice commands. Ensure your smart glasses' microphone is active and configured for voice input.

For detailed instructions on specific functions and gestures, consult the user manual of your INMO Air or INMO Air2 smart glasses, as the ring acts as an input device for those systems.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the ring. Avoid using abrasive cleaners or solvents that may damage the finish.
• Storage: Store the ring in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly.

7. Troubleshooting

7.1 Compatibility Issues

Problem: The INMO AR Ring does not connect or function correctly with my smart glasses.

Solution:

• Ensure your smart glasses are either INMO Air or INMO Air2 models. The ring is specifically designed for these devices.
• Verify that both the ring and your smart glasses are sufficiently charged.
• Follow the pairing instructions for your specific INMO smart glasses model carefully.
• If using other brands like "Even G1" or "INMO go" (as per user queries), please note that compatibility is not guaranteed. This ring is optimized for INMO Air and INMO Air2.

7.2 Unresponsive Controls

Problem: The touch or gesture controls are not responding.

Solution:

• Ensure the ring is properly charged and powered on.
• Check the wireless connection between the ring and your smart glasses. Re-pair if necessary.
• Clean the touch surface of the ring to remove any dirt or debris that might interfere with touch detection.

8. User Tips

• Always ensure your INMO AR Ring is fully charged before extended use to avoid interruptions during interaction.
• Familiarize yourself with the specific gestures and commands supported by your INMO Air or INMO Air2 smart glasses, as the ring acts as an input device for these functions.
• For optimal performance, keep the ring's control surface clean and free from obstructions.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your original purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.