Introduction
Welcome to the POSEIDON SMT40 Tattoo Pen Kit user manual. This guide provides essential information for the safe and effective use of your new tattoo machine kit. Please read all instructions carefully before operating the equipment to ensure proper setup, operation, and maintenance. This kit is designed for embroidery tattooing and permanent makeup applications.
What's in the Box
Your POSEIDON Tattoo Pen Kit includes the following components:
- Tattoo Pen (1)
- Foot Pedal (1)
- Power Source (1)
- Shavers (1)
- RCA Connector (1)
- Poseidon Tattoo Cartridge Needles (20 total: 1205RL/5PCS + 1207RL/5PCS + 1209RS/5PCS + 1007CM/5PCS)
- 5cm Black Bandage (1)
- Painting Brush (1)
- Tattoo Clean Pad (4)
- Gloves (1 Pair)
- Tattoo Transfer Paper (4)
- Tattoo Practice Leather (2)
- Tattoo Ink Cups (20 medium size / 20 small-sized)
Specifications
| Feature | Specification |
|---|---|
| Model Number | SMT40 (Item: HM119-2) |
| Material | Aluminum alloy (pen body), Advanced Plastic Material (pen casing) |
| Working Voltage | 4-12V (Starting voltage: 8V) |
| Stroke Length | 3.5MM |
| Speed | 12V 12000RPM (Working frequency: 10000RPM) |
| Pen Length | 9CM |
| Motor | High quality, strong movement motor (more powerful, quieter, less vibratory) |
| Needle Material | Strictly selected 316 Stainless Steel (sterilized by ethylene oxide) |
| Kit Weight | Approx. 900g-1100g |
| Batteries Included | Yes |
Setup Instructions
- Unpack Components: Carefully remove all items from the packaging and verify against the 'What's in the Box' list.
- Connect Power Supply: Plug the power source into a suitable electrical outlet.
- Connect Foot Pedal: Insert the foot pedal's jack into the 'FOOT' port on the power supply.
- Connect RCA Cord: Attach one end of the RCA cord to the tattoo pen and the other end to the 'L' (Liner) or 'S' (Shader) port on the power supply, depending on your intended use. The power supply supports two usage modes for liner and shader.
- Attach Needle Cartridge: Gently twist and push a sterile needle cartridge into the front end of the tattoo pen until it clicks securely into place. Ensure the needle is properly seated.
- Adjust Needle Depth: Rotate the grip of the tattoo pen to adjust the needle depth to your desired setting.
- Power On: Press the power button on the power supply to turn it on. The digital display will show the current voltage.
- Adjust Voltage: Use the '+' and '-' buttons on the power supply to adjust the working voltage (recommended range 4-12V).
Operating Instructions
- Preparation: Ensure your workspace is clean and sterile. Wear the provided gloves.
- Ink Loading: Pour a small amount of tattoo ink into a sterile ink cup. Dip the tip of the needle cartridge into the ink, allowing it to draw ink into the reservoir.
- Initiate Tattooing: Press the foot pedal to activate the tattoo pen. The needle will begin to move.
- Application: Apply the needle to the practice leather or prepared skin surface with appropriate pressure and technique for lining or shading.
- Voltage Adjustment: Adjust the voltage as needed during the tattooing process to achieve optimal performance for different techniques and skin types.
- Pause/Stop: Release the foot pedal to pause or stop the tattoo pen.
- Needle Change: To change a needle, twist and pull the used cartridge out. Dispose of it safely in a sharps container. Insert a new sterile cartridge as described in the Setup section.
Maintenance
- Cleaning: After each use, disconnect the tattoo pen from the power supply. Wipe down the exterior of the tattoo pen and power supply with a disinfectant wipe. Do not immerse the power supply or tattoo pen in liquid.
- Needle Disposal: Always dispose of used needle cartridges in a designated sharps container to prevent accidental injury and contamination.
- Storage: Store the tattoo pen kit in a clean, dry place away from direct sunlight and extreme temperatures.
- Cord Care: Inspect the RCA cord and power supply cord regularly for any signs of wear or damage. Replace if necessary.
- Motor Care: The tattoo pen features a high-quality motor designed for durability. Avoid excessive force or dropping the pen to prevent damage to the internal mechanism.
Troubleshooting
- Pen Not Turning On:
- Check if the power supply is properly plugged into an outlet.
- Ensure the RCA cord is securely connected to both the tattoo pen and the power supply.
- Verify the foot pedal is connected correctly.
- Confirm the power supply is switched on.
- Weak Needle Movement:
- Increase the voltage on the power supply.
- Check if the needle cartridge is properly seated and not obstructed.
- Ensure the needle is not dull or bent.
- Excessive Vibration/Noise:
- Ensure the needle cartridge is fully and correctly inserted.
- Check for any loose parts on the tattoo pen.
- If the issue persists, the motor may require inspection by a qualified technician.
- Ink Not Flowing:
- Ensure the needle is adequately dipped into the ink to draw it into the cartridge.
- Check for blockages in the needle cartridge.
- Verify the needle depth is set correctly.
User Tips
- Practice First: Always practice on the provided tattoo practice leather before working on actual skin to get a feel for the machine and different techniques.
- Hygiene is Key: Maintain strict hygiene protocols. Always use new, sterile needles and clean your equipment thoroughly.
- Voltage Experimentation: Different tattoo techniques (lining, shading, color packing) and different skin types may require varying voltages. Experiment on practice skin to find your preferred settings.
- Needle Selection: The kit includes various needle configurations (RL for Round Liner, RS for Round Shader, CM for Curved Magnum). Understand the purpose of each needle type for optimal results.
- Comfortable Grip: The pen features a hand-slip anti-slip design. Utilize this for a comfortable and stable grip during long sessions.
Warranty and Support
For any issues or questions regarding your POSEIDON SMT40 Tattoo Pen Kit, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.
