1. Introduction
This manual provides instructions for the Rhinowalk BHD0011 Bike Handlebar Bag, designed for carrying personal items during cycling or motorcycle riding. It is intended for general consumer use and does not contain electrical components, batteries, or electronic systems.
Applicable product types include (but are not limited to):
- Handlebar bags
- Saddle bags
- Frame bags
- Pannier bags
- Tank bags
- Tail bags
This bikepacking bag is not only a practical tool for riders on their journeys but also a symbol of their spirit of exploration and self-challenge. It ensures reliable performance even in harsh conditions, providing you with confidence and support.
2. Safety Information & Warnings
⚠ WARNING: SAFETY INFORMATION
- This product is not a safety or protective device.
- Improper installation may cause loss of control, falling, or injury.
- Always check installation stability before riding.
- Do not overload the bag, as excessive weight may affect vehicle balance and handling.
- Keep away from rotating parts, hot surfaces, and exhaust components.
- This product is not a toy. Keep out of reach of children.
- Adult use only.
Usage Restrictions:
- Not intended for use as protective equipment.
- Not designed to carry hazardous materials.
- Not suitable for children.
- Do not exceed the recommended load capacity of the bag.
3. Product Features
The Rhinowalk BHD0011 Handlebar Bag is designed with thoughtful details to enhance your riding experience:
- Capacity: Adjustable from 8L to 13L.
- Material: Constructed from durable TPU/Nylon.
- Functionality: Rainproof design to protect your belongings.
- Weight: Approximately 860g.
- Waterproof Dry Bag: The dry bag is made of 420D nylon waterproof fabric, seamlessly bonded by hot pressing process, ensuring waterproofness and wear resistance.
- Harness Design: The panel fabric layer is made of nylon waterproof fabric (lightweight and wear-resistant) with a diamond mesh structure that crosses and overlaps polyester yarns, enhancing overall tear resistance. The bottom layer is polyester fiber fabric, bonded with hot melt adhesive. A semi-rigid PE board in the middle layer provides better support.
- Fixing Method: Two TPU high-tensile straps secure the panel to the handlebars. EVA foam pads filter vibrations. A buckle strap at the back strengthens fixation, preventing bag shake during riding.
- External Design: Features an elastic rope for tying relatively light objects.



4. Package Contents
Verify that all the following components are included in your package:
- Mounting Harness * 1
- Dry bag * 1
- EVA foam spacer * 4
- TPE rubber spacer * 2
- TPU High elastic strap * 2
- Cam buckle belt * 1
- Shoulder strap * 1

5. Setup & Installation
Follow these steps to securely install the handlebar bag on your bicycle:
- Pass the TPU strap through the two kinds of spacers.
- Pass the TPU strap through the harness base.
- Pass the cam buckle belt through the spacer and then through the bottom of the base.
- Fasten the TPU straps on both sides.
- Tighten the cam buckle belt at the back.
- Ensure the harness base is installed in the correct position.
- Align the inner bag to the position.
- Thread the three straps through the webbing and insert the buckle. Finished.

Handlebar Compatibility:
For road bikes equipped with drop bars, measure the vertical clearance height from the bottom of the handlebar to the top of the front tire. This should be at least 26cm. Less than 26cm may cause the risk of grinding the front wheel. Horizontal clearance is measured from the innermost position of the lower handlebar, which should be 45cm. Less than 45cm may affect the operation of the gear lever. Follow these recommendations for optimal experience.
Most suited for large (56 yd+) gravel bikes and mountain bikes with flared drop bars.

Installation Video:
Video 1: Demonstration of the dry bag's waterproof feature and the bag's installation on a bicycle.
6. Operating Instructions
For carrying personal belongings such as tools, clothing, documents, or accessories during riding, suitable for bicycles and motorcycles only.
- Ensure the bag is securely attached to the bicycle or motorcycle according to the mounting structure (straps, buckles, Velcro, brackets, or mounting systems).
- Check that all fasteners are tightened before riding.
- Distribute weight evenly inside the bag to maintain riding stability.
- Ensure the bag does not interfere with steering, braking, pedals, chain, exhaust pipe, or wheels.
- Regularly inspect the attachment points during long-distance or off-road riding.
Dry Bag Folding Method:
To ensure the waterproof integrity of the dry bag, follow these steps:
- Put your essentials into the dry bag.
- After discharging air, fold the bag at both ends.
- Roll it up to the desired length.
- Connect the buckles at both ends to secure the closure.

7. Maintenance & Care
- Clean with a soft cloth and mild detergent.
- Do not use corrosive cleaners.
- Allow the bag to dry completely before storage.
- Store in a dry, ventilated place away from direct sunlight for long-term storage.
- Regularly inspect straps, seams, and mounting components for wear.
8. Troubleshooting
If you encounter issues with your Rhinowalk Handlebar Bag, consider the following:
- Bag feels unstable: Ensure all straps and buckles are securely tightened. Redistribute contents to achieve even weight distribution.
- Bag interferes with bike operation: Re-check installation to ensure the bag does not obstruct steering, braking, pedals, chain, exhaust pipe, or wheels. Adjust position if necessary.
- Water leakage: Verify the dry bag is properly folded and sealed according to the instructions in Section 6. Inspect for any tears or damage to the fabric.
- Difficulty attaching: Refer to the installation steps in Section 5 and ensure you are using the correct spacers and straps for your handlebar type.
9. User Tips
- Always perform a quick check of all attachment points before each ride, especially on longer trips or rough terrain, to ensure the bag remains secure.
- When packing, place heavier items closer to the handlebars and distribute weight evenly to maintain bike balance and handling.
- Utilize the external elastic rope for quick access items like a light jacket or gloves, but ensure they are securely fastened.
10. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Rhinowalk |
| Model Number | BHD0011 |
| Type | Handlebar Bag |
| Material | TPU/Nylon |
| Function | Rainproof |
| Capacity | 8L-13L |
| Weight | 860G |
| Color Options | Black, Yellow, White |
| Harness Size | 30.5cm x 35cm x 0.8cm |
| Dry Bag Size | 82cm x 27.5cm |
| Harness Width | 30.5cm (12in) |
| Max Handlebar Width Suggestion | 45cm (17.7in) |
| Origin | Mainland China |

11. Warranty & Support
This instruction manual is provided for general guidance only. Users must comply with local laws and regulations when using the product.
For specific warranty information or support inquiries, please refer to the seller or manufacturer's official website.
Manufacturer Information:
- Manufacturer / Brand: Rhinowalk
- Country of Origin: China
12. Disposal & Environmental Information
- Dispose of the product in accordance with local waste management regulations.
- Do not dispose of with household waste where textile recycling is available.
13. Compliance & Regulatory Information
CE Marking:
This product is not subject to mandatory CE marking, as it is a non-electrical, non-mechanical personal accessory. No CE marking is required under current EU legislation for this product category.
Applicable EU Regulations:
This product complies with applicable EU General Product Safety Regulation (EU) 2023/988 (GPSR), ensuring that products placed on the EU market are safe under normal or reasonably foreseeable conditions of use.