1. Introduction
The HOMEFISH P10 Smart Soap Dispenser is a touchless, motion-sensing device designed for hygienic hand washing. It features a large 420ml capacity and offers both foam and gel dispensing options, making it versatile for various liquid soaps. Its wall-mounted design helps save space, and the automatic induction ensures a convenient, hands-free experience.

2. Product Specifications
| Feature | Specification |
|---|---|
| Product Model | P10 |
| Rated Power | 1.5W |
| Power Supply | Lithium Battery |
| Charging Port | TYPE-C USB |
| Charging Parameters | 5V-1A |
| Charging Time | Approx. 3 hours |
| Usage Times (per charge) | Approx. 2000 times |
| Working Mode | Infrared Induction |
| Sensing Speed | 0.25 seconds |
| Sensing Distance | 0-70mm |
| Dispensing Time (4 gears) | 0.3s / 0.8s / 1.5s / 2.0s |
| Bottle Capacity | 420ML |
| Net Weight (excluding soap) | 261g |
| Gross Weight (excluding soap) | 377g |
| Working Temperature | 5°C~35°C |
| Working Humidity | 0%~85% |
| Waterproof Grade | IPX5 |
| Certifications | CE, FCC, RoHS |

3. Setup Instructions
3.1 Filling the Dispenser
- Turn the bottle 90 degrees counterclockwise to unscrew it from the main unit.
- Fill the bottle with your desired liquid soap. Ensure that for the foam model, the soap solution is diluted with water (soap:water = 1:4) to prevent clogging.
- Align the bottle mouth card position with the body card position, then rotate the bottle 90 degrees clockwise to secure it.

3.2 Mounting Options
The P10 dispenser can be placed on a desktop or mounted on a smooth wall using the provided adhesive hook.
- Desktop Placement: Simply place the dispenser on a flat, stable surface.
- Wall Mounting: Attach the self-contained adhesive hook to a clean, smooth wall surface. Then, hang the dispenser onto the hook.

4. Operating Instructions
4.1 Power On/Off
- Turn On: Press the touch area once. LED1 will light up for 2 seconds.
- Turn Off: Long press the touch area for 2 seconds. LED1 and LED4 will flash for 3 seconds, then the device will power off.
4.2 Dispensing Soap
Place your hand below the dispensing mouth, within a sensing distance of 0-70mm. The machine will automatically dispense soap according to the selected gear.


4.3 Adjusting Dispensing Volume (Gears)
Press the power button to cycle through the four dispensing gears. The LED indicators will show the current gear:
- 1st Gear: LED1 lighted (0.3 seconds dispensing)
- 2nd Gear: LED1, LED2 both lighted (0.8 seconds dispensing)
- 3rd Gear: LED1, LED2, LED3 all lighted (1.5 seconds dispensing)
- 4th Gear: LED1, LED2, LED3, LED4 all lighted (2.0 seconds dispensing)

4.4 Cleaning Mode
To activate the cleaning mode, turn on the machine and triple-click the power button. The machine will automatically turn off the cleaning mode after 10 seconds, or you can click the power button again to stop it manually.
4.5 Standby Mode
The soap dispenser will automatically enter a standby mode if it is not used for a long period. There is no need to manually turn it off.
5. Maintenance
5.1 General Cleaning
It is recommended to use a wet towel to gently wipe the surface of the dispenser when it is turned off. Do not immerse the product in water or rinse directly with water to avoid short circuits.

5.2 Charging Port Protection
After the product is charged, ensure the soft rubber plug of the charging port is securely inserted to prevent water from entering.
5.3 Long-Term Storage
If the product will be left unused for a long time, please remove the hand sanitizer from the bottle to avoid deterioration of the liquid.
5.4 Important Notes for Maintenance
- When installing or replacing hand sanitizer, do not tilt the bottle body excessively. A small amount of liquid flow is normal and can be wiped off.
- Only use dedicated hand sanitizer or appropriately diluted solutions. Using non-dedicated or improperly diluted liquids may cause machine failure.
- Store this product in a cool place, away from direct sunlight or close to heat sources.
- In the event of water spraying, accidental upside-down placement, or tilting, immediately confirm if liquid has entered the machine. If necessary, wipe it dry thoroughly before continuing use.
6. Troubleshooting
| Failure Phenomenon | Cause of Issue | Solution |
|---|---|---|
| Cannot switch machine | Battery is exhausted | Charge the device using the TYPE-C charging cable. |
| Indicator LED does not shine | Product is not turned on | Boot the device properly by pressing the touch area. |
| Does not dispense soap | Liquid soap is finished | Refill the liquid soap bottle. |
| Indicator flashes quickly | Sensor is covered by soap | Shut down the device, wipe the sensing area clean, and restart. |
6.1 Stop Sprayed Out Troubleshooting (for Foam Model)
If the foam dispenser stops spraying or the output is weak, the filter might be clogged. Use the dredge bottle provided:
- Unscrew the soap dispenser bottle and pull off the filter head and the end of the hose.
- Cut a small part from the dredge bottle mouth with scissors to open it.
- Insert the dredge bottle into the hose and fill the hose with clean water until it comes out from the nozzle. This helps clear any blockages.


7. Safety Information
- This unit and its accessories are not toys. Keep them out of reach of children.
- Do not pull the power cord with wet hands to prevent electrical hazards.
- Ensure the adapter and power cord are dry before connecting to power.
- This product contains a built-in rechargeable battery. Do not throw it into fire, or charge, use, or leave it in high-temperature environments.
- Do not use the product if the power cord or adapter is damaged, or if the power cord socket is loose.
- Before charging, ensure that the voltage marked on the product matches your local power supply voltage.
- Use and store the product at a temperature between 5°C and 35°C.
- If you notice any abnormality or failure, stop using the product immediately.
- Do not disassemble the body to replace the battery.
- Do not knock or drop the product. If damaged due to collision or fall, discontinue use.
- Persons with physical or mental impairments, or lack of experience and knowledge (including children), should use this product under the supervision and guidance of a guardian.
8. User Tips
- Foam Dilution: For the foam dispensing model, always dilute your liquid soap with water at a 1:4 ratio (1 part soap to 4 parts water). This prevents clogging and ensures proper foam consistency.
- Charging Usage: The dispenser is designed not to operate while charging. Ensure it is fully charged before use for uninterrupted functionality.
- Liquid Compatibility: While versatile, ensure the liquid you use is compatible with the dispenser type (foam or gel) to avoid operational issues.
- Regular Cleaning: Periodically clean the sensor area and nozzle to maintain optimal performance and prevent residue buildup.
9. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.