1. Product Description
The Rhinowalk BHD0011 Wilderness Series Bike Handlebar Bag is designed for carrying personal items during cycling or motorcycle riding. It is intended for general consumer use and does not contain electrical components, batteries, or electronic systems.
This bag is part of the Wilderness Series, crafted for passionate bikepacking enthusiasts. It combines practical features with innovative new-tech fabrics to ensure reliable performance even in harsh conditions.
Key Features:
- Harness Design: The panel fabric layer is made of lightweight and wear-resistant nylon waterproof fabric, featuring a diamond mesh structure with overlapping polyester yarns for enhanced tear resistance. A semi-rigid PE board in the middle layer provides better support.
- Waterproof Dry Bag: Constructed from 420D nylon waterproof fabric, seamlessly bonded by a hot pressing process, ensuring waterproofness and wear resistance.
- Fixing Method: Utilizes two TPU high-tensile straps to securely fix the panel to the handlebars. EVA foam pads are included to filter vibrations. A buckle strap at the back further strengthens fixation, preventing bag movement during riding.
- External Design: Features an elastic rope for securing various relatively light objects externally.
- Advanced Waterproof Fabric: New composite nylon fabric with a nylon waterproof surface layer and a diamond mesh middle layer with polyester yarns. Fishing lines are alternately added between the surface and bottom layers to enhance overall tear resistance. The bottom layer is polyester fiber fabric, offering additional waterproofing and wear resistance.

Figure 1: Rhinowalk BHD0011 Handlebar Bag mounted on a bicycle.
2. Setup and Installation
Follow these steps to properly install your Rhinowalk BHD0011 Handlebar Bag:
- Prepare Straps: Pass the TPU strap through the two types of spacers provided.
- Attach to Harness Base: Pass the TPU strap through the harness base.
- Secure Cam Buckle: Thread the cam buckle belt through the spacer and then through the bottom of the base.
- Fasten TPU Straps: Securely fasten the TPU straps on both sides of the handlebar.
- Tighten Rear Buckle: Tighten the cam buckle belt at the back of the harness.
- Harness Base Installation: Ensure the harness base is firmly installed on the handlebars.
- Align Inner Bag: Align the inner dry bag to its correct position within the harness.
- Final Securement: Thread the three main straps through the webbing on the dry bag and insert the buckles to secure it.

Figure 2: Visual guide for handlebar bag installation.
Handlebar Compatibility:
To ensure optimal performance and safety, check your bike's handlebar dimensions:
- Road Bikes with Drop Bars: Measure the vertical clearance from the bottom of the handlebar to the top of the front tire. This should be at least 26cm. A clearance less than 26cm may cause the bag to grind against the front wheel.
- Horizontal Clearance: Measure the horizontal clearance from the innermost position of the lower handlebar. This should be at least 45cm. This size may affect the operation of the gear lever.
- Recommended Use: Most suited for large (56 yd+) gravel bikes and mountain bikes with flared drop bars.

Figure 3: Handlebar compatibility guidelines for BHD0011.
Installation Video:
Video 1: Product overview and installation demonstration.
3. Operating Instructions
Intended Use:
This bag is designed for carrying personal belongings such as tools, clothing, documents, or accessories during bicycle or motorcycle riding.
Usage Guidelines:
- Secure Attachment: Always ensure the bag is securely attached to the bicycle or motorcycle according to the mounting structure (straps, buckles, Velcro, brackets, or mounting systems).
- Fastener Check: Before each ride, check that all fasteners are tightened.
- Weight Distribution: Distribute weight evenly inside the bag to maintain riding stability and balance.
- Interference Check: Ensure the bag does not interfere with steering, braking, pedals, chain, exhaust pipe, or wheels.
- Regular Inspection: Regularly inspect the attachment points, especially during long-distance or off-road riding.
Dry Bag Folding Method:
To ensure the dry bag remains waterproof, follow these steps:
- Load Essentials: Place your items inside the dry bag.
- Fold Ends: After loading, fold the opening of the bag at both ends.
- Roll Down: Roll the folded opening down to the desired length, compressing air out.
- Connect Buckles: Connect the buckles at both ends of the rolled opening to seal the bag.

Figure 4: Proper dry bag folding technique for waterproofing.
Usage Restrictions:
- This product is not intended for use as protective equipment.
- It is not designed to carry hazardous materials.
- Not suitable for unsupervised use by children.
- Do not exceed the recommended load capacity of the bag (see Specifications section).
4. Maintenance and Care
- Cleaning: Clean the bag with a soft cloth and mild detergent.
- Avoid Harsh Chemicals: Do not use corrosive cleaners, solvents, or abrasive materials, as these can damage the fabric and coatings.
- Drying: Allow the bag to dry completely in a well-ventilated area before storage. Do not machine dry.
- Storage: Store the bag in a dry, ventilated place away from direct sunlight and extreme temperatures for long-term preservation.
- Inspection: Regularly inspect straps, seams, buckles, and all mounting components for signs of wear, tear, or damage. Replace or repair components as needed to ensure safe operation.
5. Troubleshooting
No specific troubleshooting steps are typically required for this product. If you encounter issues, please review the installation and usage instructions carefully.
- Bag feels loose: Re-check all strap tensions and buckle connections. Ensure spacers are correctly used.
- Water ingress: Ensure the dry bag is properly folded and sealed according to the instructions. Check for any punctures or tears in the dry bag material.
- Interference with bike parts: Re-adjust the bag's position and ensure it is mounted according to compatibility guidelines.
For persistent issues, contact Rhinowalk customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | BHD0011 |
| Type | Handlebar Bag |
| Material | TPU / Nylon |
| Function | Rainproof |
| Capacity | 8L - 13L (Recommended) |
| Weight | 860g |
| Colors Available | Black, Yellow, White |
| Harness Size | 30.5cm (W) x 35cm (L) x 0.8cm (D) |
| Dry Bag Size | 82cm (L) x 27.5cm (H) |
| Max Handlebar Width Suggestion | 45cm (17.7in) |
| Origin | Mainland China |

Figure 5: Detailed capacity and size measurements.
7. Safety Information / Warning
- This product is not a safety or protective device.
- Improper installation may cause loss of control, falling, or injury. Always check installation stability before riding.
- Do not overload the bag, as excessive weight may affect vehicle balance and handling.
- Keep away from rotating parts (e.g., wheels, chain), hot surfaces (e.g., exhaust components), and sharp objects.
- This product is not a toy. Keep out of reach of children.
- Adult use only.
8. Warranty and Support
Manufacturer Information:
- Brand: Rhinowalk
- Country of Origin: China
Warranty:
Specific warranty details for this product may vary depending on your region and the retailer from whom you purchased it. Please refer to your purchase documentation or contact your retailer/Rhinowalk directly for warranty information.
Disclaimer:
This instruction manual is provided for general guidance only. Users must comply with all applicable local laws and regulations when using the product.
Compliance:
This product complies with applicable EU General Product Safety Regulation (EU) 2023/988 (GPSR), ensuring that products placed on the EU market are safe under normal or reasonably foreseeable conditions of use. No CE marking is required under current EU legislation for this product category.
Disposal:
Dispose of the product in accordance with local waste management regulations. Do not dispose of with general household waste if textile recycling facilities are available in your area.
9. User Tips
No specific user tips were available from the provided data. However, general tips for bikepacking bags include:
- Pack Smart: Place heavier items closer to the handlebars for better balance.
- Test Ride: Always do a short test ride after installation to ensure everything is secure and does not interfere with your bike's operation.
- Weather Prep: Even though the bag is waterproof, consider using additional dry sacks for electronics or highly sensitive items in extreme wet conditions.