QIYIDA X99 H9S Motherboard Set Kit User Manual

1. Product Overview

The QIYIDA X99 H9S Motherboard Set Kit offers a powerful computing solution, supporting LGA2011-3 Intel Xeon E5 V3/V4 series processors and DDR4 quad-channel memory. It is designed for various demanding applications including gaming, audio & video production, industrial computing, workstations, and servers.

This kit is available in three configurations:

• Motherboard Only: Includes the QIYIDA X99 H9S Motherboard.
• Motherboard + CPU: Includes the QIYIDA X99 H9S Motherboard and an Intel Xeon E5 2630 V4 CPU.
• Motherboard + CPU + RAM: Includes the QIYIDA X99 H9S Motherboard, an Intel Xeon E5 2630 V4 CPU, and 16GB (1x8GB) ECC REG DDR4 memory.

2. Specifications

3. Setup Instructions

Before beginning installation, ensure your power supply unit (PSU) can provide at least 500W of power to adequately support the motherboard and its components.

3.1 Component Identification

Key components and ports:

• CPU Socket (LGA2011-3): For Intel Xeon E5 V3/V4 processors.
• DDR4 Quad-Channel Memory Slots: Four slots for DDR4 RAM.
• 24-Pin DC Power Connector: Main power input.
• 8-Pin Power DC Connector: CPU power input.
• SATA 3.0 Ports: Four ports for SATA storage devices.
• M.2 NVMe/NGFF Slots: Two M.2 slots for high-speed SSDs. One supports both NVMe and NGFF, the other is NVMe only.
• PCIe x16 3.0 Slot: For graphics cards.
• PCIe x1 Slot: For expansion cards.
• USB 2.0 Ports: Multiple ports for peripherals.
• USB 3.0 Ports: Multiple ports for high-speed peripherals.
• Gigabit Network (RJ45): For wired internet connection.
• Audio Ports: For audio input/output.
• PS/2 Ports: For legacy keyboard and mouse.
• TPM 2.0 Pin Header: For Trusted Platform Module.

3.2 Processor Installation

1. Carefully open the LGA2011-3 CPU socket lever.
2. Align the Intel Xeon E5 processor with the socket, ensuring the notches match.
3. Gently place the CPU into the socket. Do not force it.
4. Close the socket lever to secure the CPU.
5. Install the CPU cooler according to its manufacturer's instructions.

3.3 Memory Installation

1. Open the clips on the DDR4 memory slots.
2. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot.
3. Press down firmly on both ends of the memory module until the clips snap into place.
4. Ensure all four memory channels are populated for optimal performance if using quad-channel memory.

3.4 Storage Device Installation

3.4.1 M.2 NVMe/NGFF SSD Installation

1. Locate the M.2 slots on the motherboard.
2. Remove the M.2 standoff screw.
3. Insert the M.2 SSD into the slot at an angle.
4. Push down the SSD and secure it with the standoff screw.
5. Note the M.2 NVME/NGFF switch if your SSD requires it.

3.4.2 SATA Drive Installation

1. Connect one end of a SATA data cable to a SATA 3.0 port on the motherboard.
2. Connect the other end of the SATA data cable to your SATA hard drive or SSD.
3. Connect a SATA power cable from your PSU to the SATA drive.

3.5 Power Connections

1. Connect the 24-pin ATX power cable from your PSU to the 24-pin connector on the motherboard.
2. Connect the 8-pin EPS power cable from your PSU to the 8-pin CPU power connector on the motherboard.
3. Ensure all power connections are firmly seated.

3.6 Peripheral Connections

1. Connect your keyboard and mouse to the PS/2 or USB ports.
2. Connect your monitor to the graphics card (if installed) or integrated graphics port.
3. Connect your Ethernet cable to the RJ45 port for network access.
4. Connect any audio devices to the audio jacks.

3.7 TPM 2.0 Module Installation (Optional)

If you intend to use a Trusted Platform Module (TPM) for enhanced security features like Windows 11 compatibility, ensure you use a module that matches the specified TPM 2.0 MS LPC-14PIN specifications. Installing an incorrect TPM module may prevent the system from booting.

4. Operating Instructions

Once all components are correctly installed and connected, you can power on your system. The QIYIDA X99 H9S motherboard is designed for high performance and stability across various applications.

• First Boot: Upon the first boot, enter the BIOS/UEFI setup to configure basic settings, boot order, and verify component recognition.
• Operating System Installation: Install your preferred operating system (e.g., Windows, Linux) from a bootable USB drive or optical media.
• Driver Installation: Install all necessary drivers for the chipset, network card, audio, and any other integrated or discrete components. Drivers are typically available on the manufacturer's website.

5. Maintenance

• CMOS Battery: The CR2032 CMOS battery may be removed before shipping due to international shipping regulations. Please install a new CR2032 battery if one is not present upon arrival.



• Dust Cleaning: Regularly clean dust from the motherboard and components, especially the MOS fan, to ensure efficient heat dissipation and prevent overheating.



• BIOS Updates: Periodically check the manufacturer's website for BIOS/UEFI updates to improve stability, compatibility, and performance.

6. Troubleshooting

• System Fails to Boot:
  • Ensure your power supply is at least 500W and all power cables (24-pin and 8-pin) are securely connected.
  • Verify that the CPU is correctly seated in its socket.
  • Check that memory modules are properly installed and not mixed (server and desktop memory cannot be used together).
  • If a TPM module is installed, ensure it is the correct MS LPC-14PIN specification. An incorrect module can prevent booting.
  • Remove all non-essential peripherals and try booting with minimal components (CPU, one RAM stick, GPU if no integrated graphics).
• No Display Output:
  • Ensure your monitor is connected to the correct video output port (either on the graphics card or motherboard).
  • Reseat your graphics card (if applicable).
  • Test with a different monitor or cable if possible.
• M.2 SSD Not Detected:
  • Ensure the M.2 SSD is properly seated and secured.
  • Check the M.2 NVMe/NGFF switch if your SSD type requires a specific setting.
  • Verify BIOS settings for M.2 slot detection.

7. User Tips

• Windows 11 Compatibility: This motherboard supports TPM 2.0, which is a requirement for Windows 11. Ensure you install the correct MS LPC-14PIN TPM module if you plan to upgrade to Windows 11.
• Power Supply: Always use a power supply of at least 500W to ensure stable operation, especially when using high-performance components.
• Memory Type: Remember that REG ECC server memory and standard desktop memory cannot be mixed on this motherboard. Use one type exclusively.
• Bundle Options: When purchasing, carefully select the bundle that includes the motherboard, CPU, and/or RAM according to your needs.

8. Support and Documentation

For further assistance or detailed technical information, please refer to the official user manual PDF available online. You can typically find this document on the QIYIDA product support page or by searching for "QIYIDA X99 H9S User Manual PDF".

The official user manual (PDF) can be referenced at: User manual (PDF)

For warranty information, please contact your retailer or refer to the warranty policy provided at the point of purchase.