1. Introduction
This manual provides essential information for the safe and efficient operation of your HOMEFISH 30A PWM Solar Panel Charger Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring optimal charging and protecting your battery from overcharge and over-discharge. It features automatic 12V/24V system recognition, a clear LCD display, and dual 5V USB outputs for charging small devices.
Figure 1: Front view of the Solar Charge Controller
2. Important Safety Instructions
Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Do not connect the load before connecting the battery.
- Do not exceed the rated voltage and current of the controller.
- Keep the controller in a dry, well-ventilated place, away from rain and high temperatures.
- Do not disassemble or modify the controller.
- Regularly check wiring for looseness and ensure good contact to prevent overheating.
- Ensure correct polarity when connecting components. Reversing positive and negative poles will cause damage.
- Only use with compatible solar panels and batteries.
3. Product Features
- Industrial-grade main control chip for stable and efficient performance.
- PWM charging control for optimized battery charging.
- Automatic identification of 12V / 24V battery systems, no manual setup required.
- Large screen LCD display with adjustable charging and discharging parameters.
- Displays voltage, current, power, capacity, and working status in real-time.
- Dual USB 5V output (2A total) for charging phones, power banks, and other DC 5V devices.
- Full 3-stage charging management: Bulk → Boost → Float charging.
- Multiple protections: Reverse polarity, overcharge, over-discharge, over-current, short circuit, and anti-backflow.
- Built-in overcurrent/short circuit protection, open circuit protection, reverse connection protection, all of which are self-healing and do not damage the controller.
- Dual MOS anti-backflow circuit for ultra-low heat generation.
- Durable housing with good heat dissipation, suitable for various solar power systems.
4. Technical Specifications
| Parameter | Value |
|---|---|
| Product Name | Solar Charger Controller |
| Type | PWM |
| Rated Charge Current | 30A |
| Battery System Voltage | 12V / 24V Auto Recognition |
| Solar Panel Input | Suitable for 12V/24V solar system |
| USB Output | 5V 2A (Dual Port) |
| Charging Mode | PWM |
| Display | LCD Digital Display |
| Working Temperature | -20°C ~ +60°C |
| Battery Type Compatibility | Various lead-acid batteries (open, sealed, gel, AGM), lithium batteries, lithium iron phosphate batteries. |
| Protection Functions | Overcharge, Over-discharge, Overload, Short-circuit, Reverse Connection |
| Material | Plastic |
5. Setup Instructions
Follow these steps carefully to connect your solar charge controller:
- Connect Battery First: Connect the positive (+) terminal of your battery to the battery positive terminal on the controller, and the negative (-) terminal of your battery to the battery negative terminal on the controller.
- Connect Solar Panel: Then, connect the positive (+) terminal of your solar panel to the solar (+) terminal on the controller, and the negative (-) terminal of your solar panel to the solar (-) terminal on the controller.
- Connect Load (Optional): If you are connecting a DC load directly to the controller, connect it to the load terminals. Important: Do not connect the load before connecting the battery.
Caution: Do not reverse positive and negative poles, otherwise permanent damage to the controller may occur.
After wiring correctly, the controller will power on automatically.
Figure 2: Controller with manual showing wiring diagram
Figure 3: Example outdoor setup
6. Operating Instructions
Once connected, the controller will automatically begin operation:
- The LCD will show real-time working data, including battery voltage, charging current, and battery capacity.
- The controller automatically manages charging and protects the battery day and night.
- The dual 5V USB ports can be used to charge small devices when the system is working.
LCD Display and Settings
The LCD display provides visual feedback on the system's status. You can navigate through different display interfaces and adjust parameters using the buttons below the screen.
Figure 4: Controller terminals and battery type indicators
Figure 5: LCD display showing 13.4V
Refer to the detailed instructions in the official user manual (PDF) for specific parameter adjustment procedures, including setting battery types (e.g., B02 for 3S lithium batteries, B01 for lead-acid, B03 for lithium iron phosphate) and charge/discharge thresholds. The PDF manual can be accessed via the seller's product page or by searching for the product model online.
7. Maintenance
To ensure the longevity and optimal performance of your solar charge controller, perform the following maintenance checks:
- Regularly inspect all wiring connections to ensure they are tight and free from corrosion.
- Keep the controller clean and free from dust and debris.
- Ensure the installation area remains dry and well-ventilated.
- Periodically check the battery terminals for corrosion and clean if necessary.
- Monitor the LCD display for any error codes or unusual readings.
8. Troubleshooting
Common Issues and Solutions:
- Controller not powering on / LCD not displaying:
- Ensure the battery is connected first and has sufficient charge. The display will not show correctly if a battery is not connected.
- Check all wiring for correct polarity and secure connections.
- Verify the battery voltage is within the controller's operating range (12V/24V).
- Battery not charging:
- Check solar panel connections and ensure they are receiving adequate sunlight.
- Verify solar panel voltage is sufficient for charging the battery type.
- Ensure the battery type setting on the controller matches your battery (e.g., B01 for lead-acid, B02 for lithium, B03 for lithium iron phosphate).
- Load not working:
- Ensure the load is connected correctly to the load terminals.
- Check if the battery has enough charge to power the load.
- Verify the load current does not exceed the controller's rated load current.
- Overcurrent/Short circuit protection activated:
- Disconnect the load or solar panel.
- Identify and resolve the short circuit or overcurrent condition.
- The controller's self-healing protection should reset once the issue is resolved.
9. User Tips
- Battery Connection is Key: Always connect the battery to the controller first. The display may not function correctly if a battery is not connected, even if solar panels are attached.
- Lithium Battery Settings: For 3S lithium battery packs, set the controller to 'B02' mode. Consult the full manual for other lithium battery configurations (e.g., B03 for LiFePO4).
- Direct Load Connection: The controller is designed to work with a battery. Avoid connecting a solar panel directly to a load (like a solar pump) through the controller without a battery in the circuit, as this is not its intended use and may lead to improper operation or damage.
- Detailed Instructions: For advanced settings and specific battery configurations, refer to the comprehensive user manual (PDF) provided by the manufacturer.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for this product. You can typically find this document on the seller's product page or by searching online using the product model number. This PDF contains in-depth information on advanced settings and specific operational procedures.